MAVLink

MAVLink or Micro Air Vehicle Link is a protocol for communicating with small unmanned vehicle. It is designed as a header-only message marshaling library. MAVLink was first released early 2009[1] by Lorenz Meier under LGPL license.[2]

Applications

It is used mostly for communication between a Ground Control Station (GCS) and Unmanned vehicles, and in the inter-communication of the subsystem of the vehicle. It can be used to transmit the orientation of the vehicle, its GPS location and speed.

Packet Structure

In version 1.0 the packet structure is the following:

Field name Index (Bytes) Purpose
Start-of-frame 0 Denotes the start of frame transmission (v1.0: 0xFE)
Pay-load-length 1 length of payload (n)
Packet sequence 2 Each component counts up his send sequence. Allows to detect packet loss
System ID 3 Identification of the SENDING system. Allows to differentiate different systems on the same network.
Component ID 4 Identification of the SENDING component. Allows to differentiate different components of the same system, e.g. the IMU and the autopilot.
Message ID 5 Identification of the message - the id defines what the payload “means” and how it should be correctly decoded.
Payload 6 to (n+5) The data into the message, depends on the message id.
CRC (n+6) to (n+7) Check-sum of the entire packet, excluding the packet start sign (LSB to MSB)

CRC field

To ensure message integrity a CRC is calculated to every message into the last two bytes. Another function of the CRC field is to ensure the sender and receiver both agree in the message that is being transferred. It is computed using an ITU X.25/SAE AS-4 hash of the bytes in the packet, excluding the Start-of-Frame indicator (so 6+n+1 bytes are evaluated, the extra +1 is the seed value).

Additionally a seed value is appended to the end of the data when computing the CRC. The seed is generated with every new message set of the protocol, and it is hashed in a similar way as the packets from each message specifications. Systems using the MAVLink protocol can use a precomputed array to this purpose.[3]

The CRC algorithm of MAVLink has been implemented in many languages, like Python[4] and Java.[5][6]

Messages

The payload from the packets described above are MAVLink messages. Every message is identifiable by the ID field on the packet, and the payload contains the data from the message. An XML document in the MAVlink source[7] has the definition of the data stored in this payload.

Below is the message with ID 24 extracted from the XML[8] document.

<message id="24" name="GPS_RAW_INT">
        <description>The global position, as returned by the Global Positioning System (GPS). This is NOT the global position estimate of the system, but rather a RAW sensor value. See message GLOBAL_POSITION for the global position estimate. Coordinate frame is right-handed, Z-axis up (GPS frame).</description>
        <field type="uint64_t" name="time_usec">Timestamp (microseconds since UNIX epoch or microseconds since system boot)</field>
        <field type="uint8_t" name="fix_type">0-1: no fix, 2: 2D fix, 3: 3D fix. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix.</field>
        <field type="int32_t" name="lat">Latitude (WGS84), in degrees * 1E7</field>
        <field type="int32_t" name="lon">Longitude (WGS84), in degrees * 1E7</field>
        <field type="int32_t" name="alt">Altitude (WGS84), in meters * 1000 (positive for up)</field>
        <field type="uint16_t" name="eph">GPS HDOP horizontal dilution of position in cm (m*100). If unknown, set to: UINT16_MAX</field>
        <field type="uint16_t" name="epv">GPS VDOP horizontal dilution of position in cm (m*100). If unknown, set to: UINT16_MAX</field>
        <field type="uint16_t" name="vel">GPS ground speed (m/s * 100). If unknown, set to: UINT16_MAX</field>
        <field type="uint16_t" name="cog">Course over ground (NOT heading, but direction of movement) in degrees * 100, 0.0..359.99 degrees. If unknown, set to: UINT16_MAX</field>
        <field type="uint8_t" name="satellites_visible">Number of satellites visible. If unknown, set to 255</field>
</message>

Note: The XML document describes the logical ordering of the fields for the protocol. The actual wire format (and typical in-memory representation) has the fields reordered[9] to reduce Data structure alignment issues. This can be a source of confusion when reading the code generated from the message definitions.

MAVLink Ecosystem

MAVLink is used as the communication protocol in many projects, which may mean there is some compatibility between them. Some projects known to use MAVLink are:

Autopilots

Software

References

  1. ↑ https://github.com/mavlink/mavlink/commit/a087528b8146ddad17e9f39c1dd0c1353e5991d5
  2. ↑ http://qgroundcontrol.org/mavlink/start
  3. ↑ http://qgroundcontrol.org/mavlink/crc_extra_calculation
  4. ↑ https://github.com/mavlink/mavlink/blob/master/pymavlink/generator/mavcrc.py?source=c
  5. ↑ https://github.com/arthurbenemann/droidplanner/blob/master/Mavlink/src/com/MAVLink/Messages/CRC.java
  6. ↑ https://github.com/ghelle/MAVLinkJava
  7. ↑ https://github.com/mavlink/mavlink/blob/master/message_definitions/v1.0/common.xml
  8. ↑ XML
  9. ↑ http://qgroundcontrol.org/mavlink/crc_extra_calculation#field_reordering
This article is issued from Wikipedia - version of the Wednesday, September 16, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.