Logarithmic scale

A log scale makes it easy to compare values that cover a large range, such as in this map

A logarithmic scale is a nonlinear scale used when there is a large range of quantities. Common uses include the earthquake strength, sound loudness, light intensity, and pH of solutions.

It is based on orders of magnitude, rather than a standard linear scale, so each mark on the scale is the previous mark multiplied by a value.

Common usages

The following are examples of commonly used logarithmic scales, where a larger quantity results in a higher value:

The following are examples of commonly used logarithmic scales, where a larger quantity results in a lower (or negative) value:

Some of our senses operate in a logarithmic fashion (Weber–Fechner law), which makes logarithmic scales for these input quantities especially appropriate. In particular our sense of hearing perceives equal ratios of frequencies as equal differences in pitch. In addition, studies of young children in an isolated tribe have shown logarithmic scales to be the most natural display of numbers by humans.[1]

Graphic representation

Various scales: lin–lin, lin–log, log–lin, and log–log. Plotted graphs are: y = 10 x (red), y = x (green), y = loge(x) (blue).
Main articles: log–log plot and semi-log plot

The top left graph is linear in the X and Y axis, and the Y-axis ranges from 0 to 10. A base-10 log scale is used for the Y axis of the bottom left graph, therefore the Y axis ranges from 0[note 1] to 1,000.

The top right graph uses a log-10 scale for just the X axis, and the bottom right graph uses a log-10 scale for both the X axis and the Y axis.

Presentation of data on a logarithmic scale can be helpful when the data

A slide rule has logarithmic scales, and nomograms often employ logarithmic scales. The geometric mean of two numbers is midway between the numbers. Before the advent of computer graphics, logarithmic graph paper was a commonly used scientific tool.

Log–log plots

Plot on log–log scale of equation F(x) = (x10 )(1020), which can be expressed as the line: log(F(x)) = 10 log(x) + 20.

If both the vertical and horizontal axis of a plot is scaled logarithmically, the plot is referred to as a log–log plot.

Semi logarithmic plots

If only the ordinate or abscissa is scaled logarithmically, the plot is referred to as a semi logarithmic plot.

See also

Notes

  1. not exactly zero, but close enough for the purpose of this explanation

References

External links

This article is issued from Wikipedia - version of the Thursday, December 24, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.