Lockset

Metal fire-resistance rated door with a lockset consisting of a locking latchbolt operated by lever handle with an escutcheon that encompasses the locking mechanism.

A lockset (alternatively lock set) is the hardware and components that make up the locking or latching mechanism that can usually be found on a door or other hinged object but can also include sliding doors and dividers.[1] The components of a lockset can include (but are not limited to) the door handles (commonly both inside and outside), latchbolt, dead bolt, face plate, strike plate, escutcheon, thumbturn, push button, turn button, and other trim. The lockset and associated hardware typically defines a door's function and how a user could (or could not) access the two adjacent spaces defined by the opening associated with the lockset.

Regulation

The Americans with Disabilities Act of 1990, under Title III, and many state and local governments regulate locksets in buildings occupied by the public. Typically, locksets that employ door knob controlled latches are forbidden for public use in favor of lever handles, which are easier to operate by gravity instead of the grasping and turning required by knobs. Many municipalities also regulate locksets in terms of fire rating, using standards determined more broadly by national or international organizations such as Underwriters Laboratories in the United States or the International Code Council, which are often supplemented by local governmental organizations, e.g. New York City's Materials and Equipment Acceptance (MEA) Division of their Board of Standards and Appeals (BSA),[2] or by local building codes. For example, mandates of building code may outlaw, e.g., E2141/F16 "Double-Keyed Deadbolt" from group occupancies, or require, e.g., F93/F15 on hotel or motel doors.

Industry standards

The American National Standards Institute (ANSI), a private non-profit organization, and the Builders Hardware Manufacturers Association (BHMA) administer and coordinate the voluntary standardization to develop and maintain performance standards for builder's hardware. Locks and handle sets are covered by standard A152.2, deadbolts by A156.5, and finishes by A156.18.

Aspects of a lockset

Three standard grades

The grade specified according to the standards of ANSI/BHMA indicate the security and durability of the lockset.

Grade 1 
Commercial, highest grade security and durability.
Grade 2 
Residential, with excellent security and durability.
Grade 3 
Residential, minimum acceptable grade.

Two lockset mechanisms

The lockset's latching (resp., locking) mechanism may be of the mortise or cylindrical type.[3] The mortise mechanism resides in a (usually metal) box, requiring for installation a rectangular cavity mortised into the door. The cylindrical mechanism is typically installed into the door via a cavity that can be simply bored into the door, say with a hole saw.

Two types of latches

A lockset may incorporate a latchbolt, a deadbolt, or may integrate both into a single lockset.

Latchbolt 
The latchbolt is spring-loaded, allowing the door to be closed without first retracting the bolt. In addition, the bolt may be fitted with a guardbolt, which is arranged to prevent the unwanted retraction of the latchbolt by an intruder; in this case the latchbolt is called a deadlocking latchbolt. There may be a provision on the inside handle to disable (lock) the outside handle from operating the latchbolt; this is referred to in the table below as the "inside locking mechanism". This mechanism may consist of a push button or turn button in the inside handle.
Deadbolt 
A deadbolt may be projected (thrown) only once the door is in the closed position; it will resist being forcibly retracted once it is in its projected position, hence is known as a deadlock. If it is projected or retracted by a handle (rather than by a key), that handle is referred to in the table below as a "thumbturn".

Keyed and non-keyed locksets

A lockset may be fitted with a keyable lock on inside, on outside, or not at all, the latter being known as a non-keyed lockset. If the lockset has a single keyed side, it is called a keyed, single-cylinder lockset, if both, a keyed, double-cylinder lockeset. In this aspect, the word "cylinder" refers to any type of keyed cylinder lock, rather than to the type of mechanism of the lockset.

Door function

Locksets come in many variant types, each appropriate to a particular use.[4] Lockset manufacturers may describe a lockset product in terms of how a door is operated by a user, while ANSI/BHMA assign standard alphanumeric codes to the function of a lockset.[5][6][7] For accurate and precise descriptions, the standard function code should be used when specifying a lockset.

Closet door 
May use a lockset consisting of two operating handles, both of which are never locked. A cylindrical mechanism lockset on such a door would be given the ANSI code F75, a mortised lockset F01.
Bathroom/WC 
A lockset for such a door typically includes a provision to lock from the inside, preserving the privacy of the occupant, along with a means of unlocking from the outside in case of emergency (lockset F76B/F19).
Office Door 
A typical use case occurs upon departing the office: the user pushes a button on the inside handle, locking the door, then pulls the door shut behind. The door must now be opened with a key. The F82(F04) function works for this case.
Server Room 
For enhanced security, the addition of a deadbolt is useful. The F88/F09 "Entrance" function allows the door to be locked from the outside with a key, while still allowing people inside to freely leave without a key.
Break Room 
Door may be specified as non-locking; the F75/F01 "Passage" function serves the purpose.
Medical Storage Closet 
Door should be locked at all times, calling for the F86/F07 "Storeroom" function.
Classroom function 
Designated F84/F05, which allows occupants out of the room regardless if the door is locked. In the wake of school shootings, the F110 lockset may be desirable: it allows the outside handle to be locked by using a key on on the inside, but still allows occupants free egress.

ANSI/BHMA door function codes

ANSI/BHMA function codes for cylindrical and mortise locksets
Non-keyed locksets
Cylindrical Mortise Function label Description Example locations
— — Dummy Handle on one side only, not operative. No latch. Decorative doors, cabinets, office restrooms
F89[8] — Exit Deadlocking latchbolt operated by inside handle only; outside handle inoperable at all times. Exit-only door.
F111[9] F31[10] Exit Deadlocking latchbolt operated by inside handle only. Blank plate outside (13/16" (31 mm) projection). Exit-only door.
F75[8] F01[10] Passage, Closet Latchbolt operated by handle from either side at all times. Residential closets, any door that must be latched, does not require locking.
F76A[8] F22[11] Privacy Bath/Bedroom Latchbolt operated by handle from either side. Outside handle is locked by inside locking mechanism. It is unlocked by emergency release outside, by operating inside handle, or by closing the door. Single stall or residential bathrooms, offices, bedrooms
F76B[12] — Privacy Bath/Bedroom Latchbolt operated by handle from either side, except when outside handle is locked by locking device inside (inside handle always operates latchbolt). Locking device shall automatically release when inside handle is operated, or door is closed. Emergency release on outside shall permit outside handle to operate latchbolt. Single stall or residential bathrooms, offices, bedrooms
— F02[10] Privacy Bath/Bedroom Handle from either side retracts latchbolt at all times. Thumbturn retracts and projects deadbolt. Emergency release retracts and projects deadbolt. Latchbolt and deadbolt operate independently of each other.
— F19[10] Privacy Bath/Bedroom Latchbolt operated by outside handle, except when deadbolt is projected. Inside thumbturn projects deadbolt. When inside handle is operated, both latchbolt and deadbolt retract simultaneously, and outside handle is unlocked. Emergency release on outside retracts and projects deadbolt. Single stall or residential bathrooms, offices, bedrooms
F76B[12] — Patio, Privacy Deadlocking latchbolt operated by handle from either side, except when outside handle is locked by locking device inside (inside handle always operates latchbolt). Locking device releases automatically when inside handle is operated or when door is closed.
Keyed latchbolt locksets, single cylinder
Cylindrical Mortise Function label Description Example locations
F112[12] — Communicating Storeroom Deadlocking latchbolt operated by inside key only. Outside has blank rose. Inside is inoperable. Should be used only where rooms have more than one exit.
F113[13] — Communicating Deadlocking latchbolt operated by inside handle except when locked by key. Non-removable blank plate outside (13/16" (31 mm) projection).
F81[8] — Entry, Office Deadlocking latchbolt operated by handle both sides. Outside handle is rendered inoperative via inside locking mechanism, which must be released manually. Key (in outside handle) only retracts latchbolt when outside handle is locked.
F82[8] F04[14] Entry, Office Deadlocking latchbolt operated by handle both sides. Outside handle is rendered inoperative via inside locking mechanism, which is released by key or by turning inside handle. Closing door neither unlocks outside handle nor releases the lock. Classrooms, commercial storage closets
F82B[12] — Entry, Office Deadlocking latchbolt operated by handle from either side except when outside handle is locked by locking device on inside (inside handle always operates latchbolt). Inside locking mechanism locks outside handle (automatically releases when inside handle is operated or key unlocks outside handle). When outside handle is locked, operating key in outside handle retracts latchbolt and unlocks locking device.
F109[13] — Entry Deadlocking latchbolt operated by handle from either side except when outside handle is locked by the inside locking mechanism (inside handle always operates latchbolt). Key outside or operating inside handle releases inside locking mechanism, except when mechanism has been rotated to keep outside handle locked. Inside locking mechanism must be manually operated to unlock outside handle.
F84[8] F05[10] Classroom Deadlocking latchbolt operated by handle from either side except when outside handle is locked from outside by key (inside handle always operates latchbolt). Classrooms, commercial storage closets, utility room
F86[8] F07[10] Storeroom / Closet / Vestibule Deadlocking latchbolt operated by key in outside handle, or by operating inside handle (inside handle always operates latchbolt). Outside handle is inoperable at all times. Commercial: storerooms, closets, apartment / office buildings, shared exterior entry / exit, commercial bathrooms, interior offices, fire exits, electronic strikes.
F90[8] — Corridor, Dormitory Deadlocking latchbolt operated by handle from either side, except when outside handle is locked by key in outside handle or by inside locking mechanism (which cannot be activated unless door is in closed position); inside handle is always operable. Key in outside handle locks or unlocks outside handle. Operating the inside handle automatically releases the inside locking mechanism. Closing the door automatically releases the inside locking mechanism.
F92[8] — Service Station Deadlocking latchbolt operated by handle from either side except when outside handle is locked by inside locking mechanism. Key retracts latchbolt when outside handle is locked. Inside locking mechanism can not be activated unless door is in closed position. Inside locking mechanism released by turning inside handle or by key in outside handle, unless inside locking mechanism is fixed in locked position by turning coin slot in inside handle.
F93[8] — Hotel, Dormitory, Apartment Deadlocking latchbolt operated by key outside and by handle inside. Outside handle always inoperative. Depressing inside locking mechanism when door is closed shuts out all keys except emergency key and projects visual occupancy indicator in cylinder face (inside locking mechanism will not activate unless door is in closed position). Inside locking mechanism released by turning inside handle, automatically reactivating all keys and retracting visual occupancy indicator. Lock out key fixes inside locking mechanism in locked position, shutting out all keys except emergency key. Hotel room
— F26[10] Institutional Privacy Key outside retracts latchbolt, overriding thumbturn when held in locked position. Thumbturn inside locks and unlocks outside handle. Handle outside unlocks when the door closes or by operating handle inside. Handle inside always retracts latchbolt. Note: Key does not lock handle outside, only unlocks it.
— F06[10] Holdback Key outside retracts latchbolt, also locks and unlocks outside handle. Handle inside always retracts latchbolt. Holdback function: to set, rotate and hold handle, then rotate key twice toward latchbolt. Handle will remain in rotated position indicating that it is unlocked.
Keyed latchbolt locksets, double dylinder
Cylindrical Mortise Function label Description Example locations
F80[8] — Communicating Deadlocking latchbolt operated by either handle. Key in either handle locks or unlocks its own handle only.
F87[8] F30[10] Utility, Asylum, Institutional Deadlocking latchbolt operated by key inside or outside. Handle inside and outside are inoperative at all times. Asylum room
F88[8] F09[10] Classroom, Security, Apartment, Exit, Privacy Deadlocking latchbolt operated by either handle unless outside handle is locked by key in inside handle. When outside handle is locked, key in outside handle only retracts latchbolt: outside handle can only be unlocked by key in inside handle.
F110[13] F32[10] Intruder Classroom Deadlocking latchbolt operated by handle from either side (inside handle always operates latchbolt). Key either inside or outside locks or unlocks outside handle. Key from either side retracts latchbolt.
— — Classroom Security Intruder Deadlocking latchbolt operated by either handle unless outside handle is locked by key (inside handle always operates latchbolt). Key in either handle locks or unlocks outside handle. When inside key locks the outside handle, only the inside key can unlock the outside handle: the outside key only retracts the latchbolt once outside handle is unlocked by inside key.
Deadlocks
Cylindrical Mortise Function label Description Example locations
E2161[15] F18[10] Deadlock with Blank plate Deadbolt operated by key outside only.
E21112[13] — Deadlock, Thumbturn Deadbolt operated by thumbturn inside only (outside blank plate).
E2192[13] — Deadlock, Thumbturn only Deadbolt operated by thumbturn inside only (no trim outside).
E2142[13] F16[10] Deadlock, Double Cylinder Deadbolt operated by key outside and inside.
E2152[13] F17[10] Deadlock Deadbolt operated by key outside; by thumbturn inside.
E0172 F29[10] Classroom Deadlock Deadbolt operated by key outside. Thumbturn inside retracts deadbolt only, will not project it.
Keyed locksets with both latchbolt and deadbolt
Cylindrical Mortise Function label Description Example locations
cf. F81 F08[10] Entry, Corridor Deadlocking latchbolt operated by handle both sides. Key and thumbturn both retract and project deadbolt. Handle outside is locked by toggle or by projecting deadbolt, and is unlocked by toggle only. Key retracts both latchbolt and deadbolt; handle outside remains locked. Handle inside retracts latchbolt only; deadbolt is retracted manually, and handle outside remains locked.
— F12[11] Dormitory, Exit Key outside or thumbturn inside retracts and projects deadbolt. Key outside retracts both latchbolt and deadbolt, handle outside remains locked. Handle outside is locked by toggle or by projecting deadbolt. When the deadbolt is projected, handle inside retracts latchbolt and deadbolt simultaneously, and handle outside remains inoperative.
cf. F90 F13[11] Dormitory, Exit Key outside or thumbturn inside retracts and projects deadbolt. When the deadbolt is in the retracted position, handle from either side retracts latchbolt. When the deadbolt is projected, handle outside is locked. When the deadbolt is projected, handle inside retracts latchbolt and deadbolt simultaneously, unlocking handle outside.
— F14[11] Storeroom Key from either side retracts and projects deadbolt. Handle from either side retracts latchbolt. Latchbolt and deadbolt are independent of each other. Not recommended for use on any door used for Life Safety egress.
— F15[11] Hotel Guest Standard key outside retracts latchbolt only and will not retract or project deadbolt; emergency key outside will retract latchbolt and deadbolt and also project deadbolt. Thumbturn inside retracts and projects deadbolt. Handle inside retracts both latchbolt and deadbolt simultaneously. Handle outside is always inoperable.
— F20[11] Entry, Apartment Key outside or thumbturn inside retracts and projects deadbolt. Key outside retracts both latchbolt and deadbolt, handle outside remains locked. Handle outside is locked by toggle or projecting deadbolt and is unlocked by toggle only. With deadbolt projected, handle inside retracts latchbolt and deadbolt simultaneously, and handle outside remains locked.
— F21[10] Room Key outside or thumbturn inside retracts and projects deadbolt. Handle either side retracts latchbolt. Latchbolt and deadbolt operate independently of each other.
— F25[10] Storeroom Key from either side retracts and projects deadbolt. Key from either side retracts latchbolt. Handle outside is locked by toggle or by projecting deadbolt and is unlocked by toggle only. When deadbolt is projected, handle inside retracts latchbolt only, and outside trim remains locked.
— F33[10] Classroom Security Intruder Deadbolt Deadlocking latchbolt operated by handle inside or outside. Key from either side retracts or projects deadbolt, which also unlocks or locks outside handle. Outside handle can only be locked by projecting the deadbolt.
— F34[10] Classroom Security Intruder Deadbolt Deadlocking latchbolt operated by handle inside or outside. Key from either side retracts or projects deadbolt, which also unlocks or locks outside handle. Outside handle can only be locked by projecting the deadbolt. Auxiliary deadlatch.
F95[13] — Interconnected Latchbolt and Deadbolt, Single-Locking Entry Latchbolt operated operated by handle from either side. Rotating thumbturn from inside or key from outside extends deadbolt to locked position. Both deadbolt and latchbolt are retracted to unlocked position by operating inside handle.
F97[16] — Entry, Double-Locking Deadlocking latchbolt is operated by handle from either side except when outside handle is made inoperable by locking device inside. When outside handle is locked, deadlocking latchbolt is operated by key outside. Inside locking device is manually operated to unlock outside handle. Rotating turn from inside or key from outside extends deadbolt to locked position. Operating inside handle always retracts both deadbolt and latchbolt. Closing door shall not release locking device inside.
F98[16] — Storeroom, Double-Locking Deadlocking latchbolt is operated by handle from either side except when outside handle is locked. Key in deadbolt cylinder outside retracts and projects deadbolt; thumb turn inside retracts and projects deadbolt. Handle outside is locked and unlocked manually with handle turn button inside. When outside handle is locked, key in outside handle retracts latchbolt. Handle inside retracts both latchbolt and deadbolt simultaneously.

References

  1. ↑ "Lockset - Definitions from Dictionary.com". dictionary.reference.com. Retrieved 2010-10-20.
  2. ↑ "What is an MEA Number?". Permitspace.Blogspot.com. Retrieved 2012-06-27.
  3. ↑ "Fire-rated Glass and Framing Glossary". fireglass.com. Retrieved 2010-10-20.
  4. ↑ "Understanding the 20+ Lock Functions". IPVM.com. Retrieved 2014-09-25.
  5. ↑ "Lock Functions". American Door Company. Retrieved 2014-09-26.
  6. ↑ "Lock Function Chart" (PDF). The Door Folks. Retrieved 2014-09-26.
  7. ↑ "What Does ANSI/BHMA Grading Mean?". kwikset.com. Retrieved 2010-10-21.
  8. 1 2 3 4 5 6 7 8 9 10 11 12 13 "Sargent ASSA ABLOY 11 Line Bored Lock". Sargent Manufacturing Company. Retrieved 2014-09-26.
  9. ↑ "Corbin Russwin ASSA ABLOY CL3100 Series Vandal Resistant Lever Locksets" (PDF). Corbin Russwin, Inc. Retrieved 2014-09-26.
  10. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 "Sargent ASSA ABLOY 7800/8200 Series Mortise Lock". Sargent Manufacturing Company. Retrieved 2014-09-26.
  11. 1 2 3 4 5 6 "Sargent ASSA ABLOY 7900 Mortise Locks". Sargent Manufacturing Company. Retrieved 2014-09-26.
  12. 1 2 3 4 "Yale 5300LN Series Grade 2 Cylindrical Lever Locks" (PDF). Yale ASSA ABLOY. Retrieved 2014-09-26.
  13. 1 2 3 4 5 6 7 8 "Locks" (PDF). Hager Companies. Retrieved 2014-09-26.
  14. ↑ "ANSI F04: Classroom, Entrance or Office Lock". "E. R. Butler & Co. Manufacturers". Retrieved 2014-09-26.
  15. ↑ "Schlage B Series Commercial Grade Deadbolts" (PDF). Ingersoll Rand Company. Retrieved 28 September 2014.
  16. 1 2 "Sargent ASSA ABLOY 7500 Interconnected Lock". Sargent Manufacturing Company. Retrieved 2014-09-26.
This article is issued from Wikipedia - version of the Wednesday, December 30, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.