Intrinsic metric

In the mathematical study of metric spaces, one can consider the arclength of paths in the space. If two points are at a given distance from each other, it is natural to expect that one should be able to get from one point to another along a path whose arclength is equal to (or very close to) that distance. The distance between two points of a metric space relative to the intrinsic metric is defined as the infimum of the length of all paths from one point to the other. A metric space is a length metric space if the intrinsic metric agrees with the original metric of the space.

Definitions

Let $(M, d)$ be a metric space. We define a new metric $d_\text{I}$ on $M$ , known as the induced intrinsic metric, as follows: $d_\text{I}(x,y)$ is the infimum of the lengths of all paths from $x$ to $y$ .

Here, a path from $x$ to $y$ is a continuous map

\gamma \colon [0,1] \rightarrow M

with $\gamma(0) = x$ and $\gamma(1) = y$ . The length of such a path is defined as explained for rectifiable curves. We set $d_\text{I}(x,y) =\infty$ if there is no path of finite length from $x$ to $y$ . If

d_\text{I}(x,y)=d(x,y)

for all points $x$ and $y$ in $M$ , we say that $(M, d)$ is a length space or a path metric space and the metric $d$ is intrinsic.

We say that the metric $d$ has approximate midpoints if for any $\varepsilon>0$ and any pair of points $x$ and $y$ in $M$ there exists $c$ in $M$ such that $d(x,c)$ and $d(c,y)$ are both smaller than

{d(x,y)}/{2} + \varepsilon

Examples

Euclidean space $\R^n$ with the ordinary Euclidean metric is a path metric space. $\R^n - \{0\}$ is as well.
The unit circle $S^1$ with the metric inherited from the Euclidean metric of $\R^2$ (the chordal metric) is not a path metric space. The induced intrinsic metric on $S^1$ measures distances as angles in radians, and the resulting length metric space is called the Riemannian circle. In two dimensions, the chordal metric on the sphere is not intrinsic, and the induced intrinsic metric is given by the great-circle distance.
Every Riemannian manifold can be turned into a path metric space by defining the distance of two points as the infimum of the lengths of continuously differentiable curves connecting the two points. (The Riemannian structure allows one to define the length of such curves.) Analogously, other manifolds in which a length is defined included Finsler manifolds and sub-Riemannian manifolds.
Any complete and convex metric space is a length metric space (Khamsi & Kirk 2001, Theorem 2.16), a result of Karl Menger. The converse does not hold in general, however: there are length metric spaces which are not convex.

Properties

In general, we have $d \le d_\text{I}$ and the topology defined by $d_\text{I}$ is therefore always finer than or equal to the one defined by $d$ .
The space $(M, d_\text{I})$ is always a path metric space (with the caveat, as mentioned above, that $d_\text{I}$ can be infinite).
The metric of a length space has approximate midpoints. Conversely, every complete metric space with approximate midpoints is a length space.
The Hopf–Rinow theorem states that if a length space $(M,d)$ is complete and locally compact then any two points in $M$ can be connected by a minimizing geodesic and all bounded closed sets in $M$ are compact.

References

Gromov, Mikhail (1999), Metric Structures for Riemannian and Non-Riemannian Spaces, Progress in Math. 152, Birkhäuser, ISBN 0-8176-3898-9
Khamsi, Mohamed A.; Kirk, William A. (2001), An Introduction to Metric Spaces and Fixed Point Theory, Wiley-IEEE, ISBN 0-471-41825-0

This article is issued from Wikipedia - version of the Sunday, September 14, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.