Lancashire Witch
This article is about the locomotive.
For the Lancashire witch trials, see
Pendle witches.
Lancashire Witch
 |
|
|
|
|
| Performance figures |
|---|
| Maximum speed |
8 miles per hour (12.9 km/h) |
|---|
|
|
|
Lancashire Witch was an early steam locomotive built by Robert Stephenson and Company in Newcastle-upon-Tyne in 1828. It was a development of Locomotion.
Description
Lancashire Witch was an 0-4-0 locomotive with rear mounted cylinders inclined at 45 degrees driving to the front wheels. The rear wheels were powered via coupling rods. The boiler had two flue tubes and the locomotive burnt coke, aided by bellows on the tender. It was the first locomotive with steel springs.[1] Lancashire Witch was the very first locomotive built by Robert Stephenson and Company.[2]
History
Built at Newcastle-upon-Tyne in 1828, Lancashire Witch was used on the Bolton and Leigh Railway,[1] which opened in June 1828, and also on the Liverpool and Manchester Railway.
Postage stamps
Lancashire Witch appeared on two postage stamps issued by Funafuti-Tuvalu on 24 December 1984.
Other locomotives
British Rail 86 213 was also named Lancashire Witch
London, Midland and Scottish Railway Royal Scot Class 4-6-0 locomotive 6125 was originally named Lancashire Witch. This loco was built by the North British Locomotive Company at Glasgow in September 1927 and withdrawn in October 1964 as 46125 3rd Carabinier.
Class 86 locomotive 86 213 was named Lancashire Witch. This locomotive has been preserved in operational condition by the AC Locomotive Group.
References
Bibliography