John T. Parsons
| John T. Parsons | |
|---|---|
| Born |
October 11, 1913 Detroit |
| Died |
April 19, 2007 (aged 93) Traverse City |
| Occupation | Inventor |
| Spouse(s) | Elizabeth Parsons (nee Elizabeth Mae Shaw) |
| Children | Carl, John, Robert, Grant, David Cameron Parsons, Meredith[1] |
| Parent(s) | Carl and Edith Thoren |
John T. Parsons (October 11, 1913 – April 19, 2007) pioneered numerical control for machine tools in the 1940s.
These developments were done in collaboration with his employee Frank L. Stulen, who Parsons hired when he was head of the Rotary Wing Branch of the Propeller Lab at Wright-Patterson Air Force Base, in April 1946. Together, they were the first to use computer methods to solve machining problems, in particular, the accurate interpolation of the curves describing helicopter rotor blades. In 1946, "computer" still meant a punched-card operated calculation machine. In 1948, Parsons' company, "Parsons Corporation" of Traverse City, Michigan, was awarded a contract to make the innovative and challenging tapered wings for military aircraft; they won the contract because they developed the computer support to do the difficult three-dimensional interpolation for the complex shapes, as well as the 800 steps long production cycle for the wing manufacturing. IBM was one of the subcontractors, as was MIT, which took care of the servomechanisms. The latter lab boosted the developments of CNC machining in the following decades, by developing reliable servo control in 1952 and the APT (Automatic Programmed Tool) programming language for CNC machines. It was only after the servos were also steered by computers that real "numerical control" was realised. The initial developments of Parsons and Stulen were only about the calculations, and not the control: the results of the calculations were given to human operators that turned the wheels on the machine tool to generate the desired tool paths.
Parsons, however, quickly saw the potential of connecting computers to the machine motors. On January 14, 1958, he received a patent for a Motor Controlled Apparatus for Positioning Machine Tool (patent number 2,820,187, filed on May 5, 1952).
The initial developments of NC machines, however, had been so expensive, that Parsons was fired from his own company, because the funding of the MIT developments was too much for the company. Parsons was reinstated as president of the company, after royalties on the patent had generated significant amounts of money. (Bendix Corporation was an initial license taker of the patent, in 1955, and eventually bought all the rights to it.)
In 1985, Parsons and Stulen received the National Medal of Technology. In 1988 he received an honorary Doctor of Engineering degree from the University of Michigan. In 1993, Parsons (but not Stulen) was inducted into the National Inventors Hall of Fame for inventing numerical control.
On Wednesday April 19, 2007 John T. Parsons died at the Grand Traverse Pavilions. He was 93. He had a son, David Cameron Parsons.[2]
References
- ↑ "Obituary" (PDF). Retrieved 26 March 2012.
- ↑ "Weddings: Judith Diers, David Parsons". New York Times.
Mr. Parsons, 50, is the vicar at St. John-St. Matthew-Emanuel Lutheran Church in Brooklyn and is to become the church's associate pastor tomorrow. He is a former opera singer and toured nationally with the Houston Grand Opera and the Santa Fe Opera. He graduated with honors from the University of Michigan, where he also received a master's degree in opera performance. Deciding on a change of career, he earned a master's degree in divinity, from Union Theological in 2001. His previous marriage ended in divorce. The bridegroom is a son of Elizabeth and John T. Parsons of Traverse City, Mich. His mother retired as a director of alumni relations for the Interlochen Center for the Arts in Interlochen, Mich. His father retired as the president of the Parsons Corporation in Traverse City, which made parts for the aeronautics industry.
|