Interdigital transducer
An interdigital transducer (IDT) is a device that consists of two interlocking comb-shaped arrays of metallic electrodes (in the fashion of a zipper). These metallic electrodes are deposited on the surface of a piezoelectric substrate, such as quartz or lithium niobate, to form a periodic structure.
IDTs primary function is to convert electric signals to surface acoustic waves (SAW) by generating periodically distributed mechanical forces via piezoelectric effect (an input transducer). The same principle is applied to the conversion of SAW back to electric signals (an output transducer). These processes of generation and reception of SAW can be used in different types of SAW signal processing devices, such as band pass filters, delay lines, resonators, sensors, etc. IDT was first proposed by White and Voltmer in 1965.
See also
Further reading
- White, R.M.; Voltmer, F.M. (1965). "Direct piezoelectric coupling to surface elastic waves". Appl. Phys. Lett. 7 (12): 314–6. doi:10.1063/1.1754276.
- Auld, B.A. (1990). Acoustic fields and waves in solids (2nd ed.). Krieger. ISBN 0898747821.
- Matthews, H. (1977). Surface wave filters: design, construction, and use. Wiley. ISBN 0471580309.
- Ristic, V.M. (1983). Principles of Acoustic Devices (2nd ed.). Wiley. ISBN 0471091537.
- Datta, S. (1986). Surface Acoustic Wave Devices. Prentice-Hall. ISBN 0138779112.
- Mamishev, A.V.; Sundara-Rajan, K.; Yang, F.; Du, Y.; Zahn, M. (2004). "Interdigital sensors and transducers" (PDF). Proceedings of the IEEE 92 (5): 808–845. doi:10.1109/JPROC.2004.826603.