Institution of Professional Engineers New Zealand

IPENZ

IPENZ logo
Formation 1914 (New Zealand Society of Civil Engineers), Wellington, New Zealand
Type Professional body
Location
Membership
about 16,000
Official language
en
Chief Executive
Susan Freeman-Greene[1]
Key people
Andrew Read (President)[2]
Staff
60
Website www.ipenz.nz

The Institution of Professional Engineers New Zealand (IPENZ) is a not-for-profit professional body representing the engineering profession in New Zealand. It has around 16,000 members who are either engineers or have a special interest in engineering, usually practising in New Zealand.[3]

As engineering is a self-regulating profession in New Zealand, IPENZ attempts to promote the interests of the New Zealand engineering profession via support services to members. Primary IPENZ services include career development for members, the implementation of competence and ethical practice standards and community recognition of engineering.[4] Most members pay annual fees, often covered by their employer. As a member they must abide by the IPENZ Code of Ethics that aims to ensure ethical engineering practice. IPENZ also promotes public debate on engineering issues and stewards national engineering awards.[5][6]

Organisation structure

IPENZ is governed by an elected board, chaired by the president and including 11 other members. This board sets strategy and employs the chief executive, who manages the expenditure of the budget to provide services to members and to fund activities defined by its strategy. The national office is based in Wellington, and there are regional branches to which members belong. Members can also be part of a technical group or special interest group that focuses on a niche area of engineering.

History

The first professional engineering body in New Zealand, the Institute of Local Government Engineers of New Zealand, was formed in 1912. The following year the New Zealand Society of Civil Engineers was formed. It was thought to be more representative of the engineering profession, and the two bodies merged in 1914.

With the growth of the Society and an increasing number of non-civil engineers, a name change to The New Zealand Institution of Engineers was necessary in 1937. In 1959 the Association of Consulting Engineers New Zealand (ACENZ) was created as a consultancy division, and it became a separate entity in 1970. The name IPENZ was adopted in 1982 to reflect the importance of the 'professional' engineering ethos in the organisation.

Membership classes and registers

In the interest of the New Zealand public, IPENZ administers several competence-based membership classes and registers that act as signifiers of competence to users of engineering services.

Qualification (or Equivalent) IPENZ Competence-based Membership Class IPENZ-administrated NZ Current-competence Register* IPENZ-administered International Register*
Four-year Bachelor of Engineering (BE) Professional Member (MIPENZ) Chartered Professional Engineer (CPEng) International Professional Engineer (IntPE)
Three-year Bachelor of Engineering Technology (BEngTech) Technical Member (TIPENZ) Engineering Technology Practitioner (ETPract) International Engineering Technologist (IntET)
Two-year Diploma of Engineering (DipEng or NZCE) Associate Member (AIPENZ) Certified Engineering Technician (CertETn)

* Current-competence registrants must be reassessed at intervals not exceeding five years to maintain registration.

Competence-based Membership Classes

IPENZ has a range of competence-based membership classes that aim to signify an engineer's level of competence. Once members of a class, individuals are not required to re-demonstrate current competence -- the system relies on their ethical obligation to not practice beyond their competence.

Current-competence Registers

IPENZ is the New Zealand Registration Authority for other engineering related registers:

Chartered Professional Engineer (CPEng)[11]
Chartered Professional Engineer (CPEng)is a current-competence quality mark for engineers at the professional level (engineers who usually have a four-year Bachelor of Engineering or equivalent qualification). The Chartered Professional Engineers of New Zealand Act (CPEng Act) was enacted on 1 July 2002 and established IPENZ as the Registration Authority to assess and then register Chartered Professional Engineers (CPEng). Those engineers who meet the relevant standards of competence can become CPEng certified but to retain registration must demonstrate regularly to IPENZ (five-yearly or more frequently) that they are still able to practise competently. This is considered a higher quality mark than MIPENZ as it is regularly assessed.

International Professional Engineers Register (IntPE)[12]
The New Zealand section of the International Professional Engineers Register IntPE(NZ) established under the APEC Engineer agreement (13 APEC Economies) and Engineering Technologist Mobility Forum agreement (15 countries) lists engineers meeting an international standard with slightly more specific eligibility requirements than CPEng.

Engineering Technology Practitioner (ETPract)[13]
Engineering Technology Practitioner (ETPract) is a current-competence quality mark for engineers at the technologist level (engineers who usually have a three-year Bachelor of Engineering Technology or equivalent qualification). It is set to be implemented on 1 July 2007.

International Engineering Technologist (IntET)[14]
International Engineering Technologist (IntET) is similar to the ETPract register but facilitates international mobility at the technologist level between signatories of the Sydney Accord. It was implemented by IPENZ on 1 July 2007.

Certified Engineering Technician (CertETn)[15]
Certified Engineering Technician (CertETn) is a current-competence quality mark for engineers at the technician level (engineers who usually hold a 2-year Diploma of Engineering (DipEng or NZCE) or equivalent qualification). It was implemented on 1 July 2007.

Professional Engineering Geologist (PEngGeol)[16]
The Professional Engineering Geologist (PEngGeol) Register is a current-competence quality mark for engineering geologists. A registrant will generally hold a geology degree at honours level or a postgraduate qualification in engineering geology or be able to demonstrate equivalent knowledge.

International recognition

New Zealand is a signatory to the Washington Accord, the Sydney Accord, and the Dublin Accord, which recognise (respectively) four-year, three-year and two-year engineering qualifications between signatories. IPENZ provides accreditation that allows for international mobility between signatory countries.[17]

See also

References

External links

This article is issued from Wikipedia - version of the Monday, February 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.