Innocenti Mini

The Innocenti Mini is an automobile introduced by Innocenti in 1974. The vehicle was a rebodied, three-door hatchback version of the Mini, styled by Bertone. A five-door prototype was developed around 1980, but was never put into production. After having been sold to de Tomaso in 1976, the Innocenti Mini ended up being powered by Daihatsu-sourced three-cylinder engines and continued in production in incrementally updated forms until 1993.

Mini assembly from CKD (1965 to 1975)

Prior to developing the Mini 90 / 120 hatchback variants of the Mini, Innocenti undertook assembly of the original Mini design using CKD kits.^[1] Introduced in November 1965 as the Innocenti Mini 850, later versions included the 1001, the Cooper, the Cooper 1300 and the Mini T, the latter being an estate car and the only non-saloon variant produced.^[1] Assembly ceased in early 1975.^[1]

British Leyland years

Innocenti Mini 90 / 120 Innocenti Mini de Tomaso
Overview
Manufacturer	Innocenti
Production	1974 – 1982
Assembly	Milan, Italy[2]
Designer	Nuccio Bertone[2]
Body and chassis
Class	Small family car
Body style	3-door hatchback
Layout	FF layout
Related	Mini
Powertrain
Engine	998 cc BMC A-series I4 1,275 cc BMC A-series I4[2]
Transmission	4-speed manual
Dimensions
Wheelbase	2,040 mm (80.3 in)[2]
Length	3,120–3,170 mm (122.8–124.8 in)[2]
Width	1,500 mm (59.1 in)[2]
Height	1,365 mm (53.7 in)[2]
Kerb weight	730 kg (1,610 lb) (approx)[2]
Chronology
Predecessor	Innocenti Mini

Innocenti, under the ownership of the British Leyland Motor Corporation (BLMC) developed rebodied versions of the Mini, known as the Innocenti Mini 90L and 120L, which were released at the Turin Show in 1974.^[3] The new, Bertone-styled Mini was originally launched in two versions, the 90L and 120L – the former having the 998 cc A-series engine putting out 43 bhp (32 kW; 44 PS), and the latter the 1275 cc unit, with an extra 20 bhp (15 kW) on tap. These outputs were later uprated to 49 bhp (37 kW; 50 PS) and 65 bhp (48 kW; 66 PS) respectively. As for the English-built Mini, the Innocenti received the "dry" rubber cone suspension, which provided excellent handling but at the cost of a very bumpy ride. All Leyland-engined Innocentis received a four-speed manual transmission.

Innocenti 90L mkII pre-Daihatsu-face-lift

At one point there were even plans for the Bertone-designed Mini to replace the original British Mini, but these came to nothing. Within a year of the car's launch, BLMC went bankrupt and in May 1976 Innocenti was sold to De Tomaso and GEPI. BL retained a 5% stake. The new owners renamed the company Nuova Innocenti ("New Innocenti") and continued to build the car without any real change.^[4]

Innocenti's Mini version was generally nicely equipped and had a better finish than their British brethren, leading to higher sales and a better reputation in many continental European markets (aside from Italy), such as France.^[5] The largest improvement was the addition of a rear hatch, allowing for improved access to the (still tiny) luggage compartment. Coincidentally, the drag resistance was also marginally lower than that of the original Mini, 0.41 Cd rather than 0.42.^[6]

De Tomaso

Innocenti De Tomaso

At the 1976 Turin Auto Show the sporting Innocenti Mini de Tomaso was first shown. It entered series production in early 1977 and featured moulded plastic bumpers rather than the filigrane, chromed units used for the 90/120. There were also integral foglights, a bonnet scoop, and wheelarch extensions to accommodate the alloy wheels which completed the sporting appearance. Power at introduction was 71 bhp (53 kW; 72 PS), but this crept up to 74 bhp (55 kW; 75 PS) in 1978.^[7]

Mille

In 1980, the facelifted and better equipped Mini Mille made its appearance. The Mille (1000) replaced the larger-engined 120 in most markets, and featured moulded plastic bumpers, headlights which sloped backwards, and redesigned taillights. Overall length increased by a couple of inches (5 cm). There was also a "90 LS II" version introduced for 1981, and the "90 SL" for the 1982 model year.^[4] By 1982, however, Alessandro de Tomaso's deal with BL had ended. For various reasons, politico-industrial as well as due to British Leyland's reluctance to provide engines to what was a competitor in many continental markets, the decision to thoroughly reengineer the Innocenti Mini was reached.^[8] After a lot of testing, the car was finally adapted to take a three-cylinder Daihatsu engine and various other mechanical parts. Because of Daihatsu's minuscule European presence, selling engines to Innocenti would have a minimal negative impact on their own sales, instead offering a door to many European markets that they had yet to reach.^[5] Thanks to Alfa Romeo's Arna deal with Nissan a few years earlier, the Italian political resistance against Japanese companies was minimised and DeTomaso encountered no political difficulties.^[9]

Daihatsu era

Innocenti Minitre/990/650 Innocenti Turbo de Tomaso
1990-1993 Innocenti Small 500
Overview
Manufacturer	Innocenti
Also called	Innocenti Small
Production	1982 - 1993
Assembly	Milan, Italy
Designer	Nuccio Bertone
Body and chassis
Class	Small family car
Body style	3-door hatchback
Layout	FF layout
Related	Daihatsu Charade
Powertrain
Engine	548 cc Daihatsu EB I3 617 cc Daihatsu AD I2 659 cc Daihatsu EF I3 993 cc Daihatsu CB22 I3 993 cc Daihatsu CB-DT/CB60/61 turbo I3 993 cc Daihatsu CL10 diesel I3
Transmission	5-speed manual 2-speed semi-automatic
Dimensions
Wheelbase	2,045–2,205 mm (81–87 in)[3]
Length	3,135–3,375 mm (123–133 in)[3]
Width	1,515–1,530 mm (60–60 in)[3]
Height	1,340–1,380 mm (53–54 in)[3]
Kerb weight	638–740 kg (1,410–1,630 lb)[3][10]
Chronology
Predecessor	Innocenti Mini

Minitre

In April 1982, at the same time as the engines were changed for Daihatsu units, the Mini's original rubber suspension was changed to a more conventional (and comfortable) independently developed layout with MacPherson struts in the front and an independent, leaf-sprung rear suspension with lower wishbones.^[11] To indicate the new engines, the cars were renamed Innocenti Tre Cilindri, or simply "Tre" (three). The new engines and suspension carried with them a weight penalty of about 55 kg (121 lb).^[9] The new Innocentis were nearly indistinguishable from their predecessors, the external changes being limited to badging and a chin spoiler. In January 1984, along with a gentle facelift, they were renamed Minitre (sometimes written "Mini 3"). Most of the new parts came straight from the Daihatsu Charade. European exports, which had hitherto been managed by local British Leyland affiliates, were either halted or generally slowed down. For the first year or two, Minitres were limited to exporting to France, Belgium, and Switzerland. In 1983, the German Daihatsu importer Walter Hagen took over sales there, after a hiatus of over a year.^[12] The old Leyland-engined versions continued to be sold until stocks ran out. In spite of the new model, production dropped steadily: from 23,187 in 1981 to 21,646 the next year to 13,688 in 1983, the first year in which all cars were Daihatsu-engined.^[13][14] During 1984, sales shot up again as the car had regained its credibility.

Aside from the sporting turbocharged version, the Minitre was originally only available with a carburetted 52 PS (38 kW) petrol engine, in three different levels of trim: S, SL, and SE.^[10] While usually fitted with a five-speed manual transmission rather than the four-speed unit used in the earlier four-cylinder cars, a two-speed semiautomatic also became available in July 1984, sold as the "Minimatic".^[15] This was the same unit as the one marketed as the "Daimatic" by Daihatsu themselves. The Matic's gearbox has the same dimensions as does the manual transmission, and is fitted with a torque converter and a planetary gear train with two gear ratios which are selected by a traditional, floor-mounted gear lever.^[16]

While the Daihatsu powertrains were considerably more expensive than the British units, Alejandro DeTomaso stated that this was more than paid for by lowered warranty claims. In 1984 he said that warranty repairs were down by 70% when Japanese-engined Minis were compared with the BL-engined ones. His biggest problem was that his service network had become overstaffed as a result of the higher quality engines.^[9] To be honest, this surfeit of servicing staff may have also been a result of steadily declining production numbers (down from the forty-thousands in the late seventies to the mid-teens by 1984/1985), something which De Tomaso tried to ameliorate by offering a more luxurious and customisable product than did their main competitor Fiat.^[17]

1988-1990 Innocenti 990 diesel SL (rear)

The three-cylinder (and some two-cylinder versions as well) continued in production until 1993, and this range was also available with a 37 PS (27 kW) diesel version of the 1-litre engine. The diesel looked the same, inside and out, as did the regular Minitre. At the time of introduction (April 1984), this engine was not only the smallest passenger car diesel in the world, but also had the highest specific output of any naturally aspirated diesel engine in series production - it thus made for a surprisingly spirited performer.^[18] Introduced as part of an effort to bring Innocenti production above the threshold of profitability, around 20,000 cars annually, the Minidiesel sold very well.^[19] The diesel took thirty percent of the overall production with nearly no negative effect on sales of the petrol versions, a considerably bigger share than the expected twenty percent.^[9] It was helped by a lack of real competitors - by 1988 it still only had to compete with the 1.3 litre Fiat Uno and Panda diesels, as well as the Volkswagen Polo diesel, all of which were in a higher tax bracket and had higher fuel consumption.^[20]

990

In Turin 1986, the longer 990 was presented – this version had a wheelbase which was extended by 16 cm (6 in) and was available with either the naturally aspirated petrol or diesel 1 L engines.^[3] In addition to a more useful backseat, the 990 also had a more sloped windscreen for somewhat better aerodynamics.^[21] Classified as a five-seater, even two adults would still find the rear seat uncomfortable.^[22] A well balanced design, the longer wheelbase version can be hard to identify, if it wasn't for the missing pillar in the glass of the door, and the forward placement of the mirrors. The luggage space also increased somewhat, with 295 L (10.4 cu ft) rather than 280 L (9.9 cu ft).^[23]

The 990 also received bigger bumpers and a new grille with horizontal bars and the Innocenti logo, a stylised "i". The rear number plate was moved up to between the rear lights.^[24] The 990's rear seat folded and was divided down the middle.^[20]

The 990 was an adaptation of a 1982 concept executed by the Embo carrozzeria, using the longer chassis of the Mini Traveller.^[25] Excepting the turbo, the shorter 1-litre versions were taken out of production in July 1987. The 990 was available as the SL, and as a better-equipped SE version.

There was also a "Minitre Commerciale", continuing the earlier Mini 90 Commerciale two-seater van. When the longer 990 arrived there was also a 990 C (for "Commerciale") and also a 990 diesel C. In France, the earlier short wheelbase diesel van was briefly available as the "Minidiesel Société". As for the usual versions, the Commerciale was somewhat hampered by its small aperture for the luggage area - especially when compared to more modern competitors.^[20]

Late production, long-wheelbase "Small 990 Serie Speciale"

Rear view of Innocenti Small 500

650/500

A "Minidue" had been rumoured for some time, but most were expecting the fitment of a Moto Guzzi 650 cc V-twin engine, since Moto Guzzi was another company owned by de Tomaso at the time.^[9] A few prototypes were even built with this engine, but the amount of work it would have taken to make the motorcycle unit suitable for a car made the project unfeasible.^[26] Instead, Innocenti chose to stick to Daihatsu engines. First shown at the Turin Auto Show in November 1984, the two-cylinder, short-stroke 617 cc "Mini 650" was also available as a better equipped "SE" model.^[27] The 650 received a silver-painted asymmetric grille, while the SE model had model-specific hubcaps divided into threes. While not very powerful at 31 PS (23 kW), the two-cylinder engine was surprisingly smooth-running thanks to the use of twin balance shafts.^[28] The dashboard was also unique to the 650 and was quite spartan, for instance it had no door to the glove compartment. In the rear, the reflective bar between the taillights was replaced by a black plastic unit.^[28]

The "650" was succeeded by the three-cylinder 550 cc (660 cc from late 1990) "Mini 500", which went on sale in January 1988.^[24] These engines all came from the Daihatsu Cuore rather than the bigger Charade. The 550 cc Innocenti 500 (with L or more luxurious LS equipment) was first shown in November 1987 and replaced the preceding "650" since engine-supplier Daihatsu had ended production of the outdated two-cylinder engine.^[29] The carburetted 500 offered 31 PS (23 kW) at 6400 rpm for a 116 km/h (72 mph) top speed. Outside Italy, this car also found some popularity in France, where its 3CV tax rating was as low as that of the considerably less habitable Fiat 126.^[21] Outside, the 500 could be identified by some visual alterations as recently used on the 990: a horizontally divided grille with a prominent "i" logo larger bumpers which incorporated the lower air intake up front. The rear number plate moved up, to between the taillights. The interior was also updated, with round gauges and new upholstery.^[24] The LS also gained an asymmetrically divided folding rear seat.^[30]

Small

Following Fiat's 1990 takeover of Innocenti, the car was renamed the Innocenti Small and the Diesel, Matic, and Turbo de Tomaso versions were dropped.^[31] Updates included a slight facelift in November 1990,^[32] while the little 500's engine was updated to a 659 cc version following changes to the kei car regulations in March 1990 to allow for 660 cc of displacement—Daihatsu had quickly replaced the smaller EB engine with the somewhat bigger EF unit. Power remained exactly the same, while an increase in torque from 42 N·m (31 lb·ft) at 4,000 rpm to 49 N·m (36 lb·ft) at 3,400 rpm increased flexibility and meant that the top speed crept up to 120 km/h (75 mph).^[32] Fuel economy also increased moderately.^{[n 1]} In July 1991 a luxurious "Serie Speciale" variant of the 990 was introduced, also offered with an available canvas-roof.^[32] The 990 Serie Speciale featured an alcantara interior by Missoni.

In 1992, catalysed versions of both Innocenti Small versions entered the market. These versions had marginally lower power (see table) and top speeds. The last development was the "Small 500 SE" of 1993, which offered the smaller engine mounted in the longer "990"-style body. Production ended on March 31, 1993, with sales continuing into the next year. Daihatsu did stop using the three-cylinder CB engine in their own cars a few months before, but this may be coincidental.

Turbo de Tomaso

After the change to Daihatsu engines, a new De Tomaso version with a turbocharged, 72 PS (53 kW) version of the 993 cc three-cylinder engine was presented in December 1983. Italian sales began the next month.^[34] This was the two-valve version; the considerably more powerful multivalve version used in the Charade GTti was never used in the Innocenti. The bodywork was also revised, with the headlights now sloping backwards and with new bumpers, skirts, and bumper extensions to fit the 160/65 SR315 (TRX) alloys. The sporty steering wheel received a leather rim. The original version was equipped with an Italian development of the naturally aspirated CB22 engine (called CB-DT, for "De Tomaso"), with an IHI RHB5 turbocharger and the same 9.1:1 compression ratio as for the CB22. Max power was reached at 6200 rpm for the original version.^[35] In road tests the Innocenti came in for complaints for its awkward driving position, mediocre comfort, and instability under braking. Plus points were steering, light weight, and appearance.^[36] The CB-DT engine was also noted for its lack of "brio".^[37]

In the second half of 1984 the Italian CB-DT engine was replaced with the fully Daihatsu-built CB60 engine.^[34] The CB60, with a smaller IHI RHB32 charger and a more suitable 8:1 compression ratio (with a 0.5 bar charge, rather than the 0.37 bar used in the CB-DT), reached max power at 5,700 rpm.^[3] Tractability at lower engine speeds also improved since the smaller charger was more willing to spool up; this had been an area of concern with the earlier engine which did not have a whole lot of power beneath 3,500 rpm.^[38]

In July 1988 the engine was upgraded to CB61 specifications; this version received grey rather than red casings in the engine compartment. For the Canadian (and Swiss) markets, a catalysed version of the carburetted CB60 engine was installed. This unit was slightly less powerful, with 68 PS (50 kW) at 5,500 rpm.^[39] After Fiat's purchase of Innocenti in 1990, the Turbo de Tomaso, along with the diesel and the "Matic" versions, were all dropped.^[31]

Exports

European exports had been run by the British Leyland affiliates in target markets, and were either halted or generally slowed down once the Daihatsu-engined cars were introduced. In 1982 and most of 1983 Minitres were only exported to France, Belgium, and to Switzerland. In 1983 Innocenti re-entered the German market,^[12] signalling a slow climb in exports once again.

The Innocenti DeTomaso was brought to Canada by a company called Incacars from 1984 but sales dropped considerably with concerns about reliability – from 2,000 cars the first year to only 196 in the first six months of 1986.^[40] Apart from a catalysed version of the CB60 engine, the Canada-bound DeTomasos also received unique rectangular side-marker lights.

Data

Notes

References

External links

• www.detomasobybertone - the official club for Innocenti DeTomasos
• www.innocenti-turbo-detomaso.com
• Automobilismo article on the Innocenti Mini (Italian)

Wikimedia Commons has media related to Innocenti Mini.