Network speaker

A conventional loudspeaker is an electromechanical transducer that converts an electrical signal into sound. If locally powered, this can also be termed an active loudspeaker, meaning it contains an audio amplifier that can drive power to the speaker drivers. A network speaker implies the ability to drive audio to such a device from a network connection, usually over an Ethernet network or the Internet. In many cases this type of speaker also contains digital signal processing (DSP) to provide the audio crossover and other signal processing to provide frequency division and other tonal functions that exist in conventional speakers. Network speakers are also known as IP speakers.[1] In many cases the IP speaker is created from an IP audio endpoint — a device as described above with the requisite network connection and ability to process audio packets, but without the actual physical speaker portion — that provides amplified audio to a conventional loudspeaker or unamplified audio (i.e. line-out) to an amplified speaker or system.

History

Network audio was first introduced in 1983 by John Detreville and W. David Sincoskie of Bell Labs in an IEEE paper "A Distributed Experimental Communications System".[2] Subsequently in 1988, Polle T. Zellweger, Douglas B. Terry and Daniel C. Swinehart of Xerox PARC introduced audio over Ethernet in Proceedings of the 2nd IEEE Conference, entitled "An Overview of the Etherphone System and its Applications".[3] The very closely related technology (nearly synonymous), Voice over IP (VoIP), which generally consists at a minimum of a microphone on one end, a speaker on the other end, with a network connecting them; began widespread use in 1998 with PCs, followed shortly after by dedicated hardware (phones with built-in VoIP capabilities). Subsequently, the first Squeezebox, using networked audio, was released in 2001 and Philips released its IP audio device also in 2001, the FW-i1000. Countless IP audio devices have since proliferated into most major audio markets.

Designs

IP Multicast
IP Unicast

The audio content played by the processor in an IP speaker is communicated from its source across a packet-switched data network using IPv4 and IPv6 addressing with a User Datagram Protocol (UDP) or Real-time Transport Protocol (RTP). The IP Speaker connects to Unicast or Multicast addresses to enable the delivery of streamed data from a source on the network, to arrive at a single speaker or many speakers respectively.

See also

References

  1. ↑ "Speakers". VoIP Supply. Retrieved 2015-04-23.
  2. ↑ John Detreville; W. David Sincoskie (December 1983). "A Distributed Experimental Communications System". IEEE Journal on Selected Areas in Communications. SAC-1 (6). doi:10.1109/JSAC.1983.1146021.
  3. ↑ Polle T. Zellweger; Douglas B. Terry; Daniel C. Swinehart (1988). "An Overview of the Etherphone System and its Applications". Computer Workstations. Proceedings of the 2nd IEEE Conference on Issue Date: 7-10 Mar 1988. doi:10.1109/COMWOR.1988.4813.
This article is issued from Wikipedia - version of the Sunday, May 31, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.