Punched card

"Overpunch" redirects here. For the code, see Signed overpunch.
An 80-column punched card of the type most widely used in the 20th century. The size of the card is 7 3⁄8 in × 3 1⁄4 in (187 mm × 83 mm). This example displays the 1964 EBCDIC character set, which added more special characters to earlier encodings.

A punched card, punch card, IBM card, or Hollerith card is a piece of stiff paper that contained either commands for controlling automated machinery or data for data processing applications. Both commands and data were represented by the presence or absence of holes in predefined positions.

Now obsolete as a recording medium, paper tapes constructed from punched cards were widely used throughout the 19th century for controlling textile looms and in the late 19th and early 20th century for controlling fairground organs and related instruments. Punched cards were used through most of the 20th century in what became known as the data processing industry; the use of unit record machines, organized into data processing systems, for data input, processing, and storage.[1] Many early digital computers used punched cards, often prepared using keypunch machines, as the primary medium for input of both computer programs and data.

As of 2015:

Paper tape made from punched cards, for a large dance organ

History

A paper tape, constructed from punched cards, in use in a Jacquard loom. The large holes on each edge are sprocket holes, used to pull the paper tape through the loom.

Perforated paper tapes were first used to control looms around 1725. However, the paper tapes were expensive to create, fragile, and difficult to repair. By 1801 Joseph Marie Jacquard had developed the machines to create paper tapes by tying punched cards in a sequence. The resulting paper tape, also called a "chain of cards", was stronger and simpler both to create and to repair.

Semen Korsakov's punched card

Semen Korsakov was reputedly the first to use the punched cards in informatics for information store and search. Korsakov announced his new method and machines in September 1832; rather than seeking patents, he offered the machines for public use.[4][5]

Charles Babbage proposed the use of "Number Cards", "pierced with certain holes and stand opposite levers connected with a set of figure wheels ... advanced they push in those levers opposite to which there are no holes on the card and thus transfer that number" in his description of the Calculating Engine's Store.[6]

Herman Hollerith invented the recording of data on a medium that could then be read by a machine. Prior uses of machine readable media, such as those above (other than Korsakov), had been for control, not data. "After some initial trials with paper tape, he settled on punched cards...",[7] developing punched card data processing technology for the 1890 US census.

Hollerith founded The Tabulating Machine Company (1896) which was one of four companies that were consolidated to form Computing-Tabulating-Recording Company (CTR), later renamed the International Business Machines Corporation (IBM). IBM manufactured and marketed a variety of unit record machines for creating, sorting, and tabulating punched cards, even after expanding into electronic computers in the late 1950s. IBM developed punched card technology into a powerful tool for business data-processing and produced an extensive line of general purpose unit record machines. By 1950, the IBM card and IBM unit record machines had become ubiquitous in industry and government. "Do not fold, spindle or mutilate," a generalized version of the warning that appeared on some punched cards (generally on those distributed as paper documents to be later returned for further machine processing, checks for example), became a motto for the post-World War II era. [8]

From the 1900s, into the 1950s, punched cards were the primary medium for data entry, data storage, and processing in institutional computing. According to the IBM Archives: "By 1937... IBM had 32 presses at work in Endicott, N.Y., printing, cutting and stacking five to 10 million punched cards every day."[9] Punched cards were even used as legal documents, such as U.S. Government checks[10] and savings bonds. The UNITYPER introduced magnetic tape for data entry in the 1950s. During the 1960s, the punched card was gradually replaced as the primary means for data storage by magnetic tape, as better, more capable computers became available. Mohawk Data Sciences introduced a magnetic tape encoder in 1965, a system marketed as a keypunch replacement which was somewhat successful, but punched cards were still commonly used for data entry and programming until the mid-1980s when the combination of lower cost magnetic disk storage, and affordable interactive terminals on less expensive minicomputers made punched cards obsolete for this role as well.[11] However, their influence lives on through many standard conventions and file formats. The terminals that replaced the punched cards, the IBM 3270 for example, displayed 80 columns of text in text mode, for compatibility with existing software. Some programs still operate on the convention of 80 text columns, although fewer and fewer do as newer systems employ graphical user interfaces with variable-width type fonts.

Today punched cards are mostly obsolete and replaced with other storage methods, except for a few legacy systems and specialized applications.

Nomenclature

The terms punched card, punch card, and punchcard were all commonly used, as were IBM card and Hollerith card (after Herman Hollerith). IBM used "IBM card"[12] or, later, "punched card" at first mention in its documentation and thereafter simply "card" or "cards".[13] Specific formats were often indicated by the number of character positions available, e.g. 80-column card. A sequence of cards that is input to or output from some step in an application's processing is called a card deck or simply deck. The rectangular, round, or oval bits of paper punched out were called chad (chads) or chips (in IBM usage). Adjacent card columns allocated for a specific use, such as names, addresses, multi-digit numbers, etc., are known as a field.

Card formats

The Hollerith punched cards used for the US 1890 census were blank.[14] Following that, cards commonly had printing such that the row and column position of a hole could be easily seen. Printing could include having fields named and marked by vertical lines, logos, and more.[15] "General purpose" layouts (see, for example, the IBM 5081 below) were also available. Some cards had one upper corner cut so that cards not oriented correctly, or cards with different corner cuts, could be identified.

Hollerith's punched card formats

Hollerith card as shown in the Railroad Gazette in 1895.[16]

Herman Hollerith was awarded a series of patents[17] in 1889 for electromechanical tabulating machines. These patents described both paper tape and rectangular cards as possible recording media. The card shown in U.S. Patent 395,781 of June 8 was printed with a template and had hole positions arranged close to the edges so they could be reached by a railroad conductor's ticket punch, with the center reserved for written descriptions. Hollerith was originally inspired by railroad tickets that let the conductor encode a rough description of the passenger:

"I was traveling in the West and I had a ticket with what I think was called a punch photograph...the conductor...punched out a description of the individual, as light hair, dark eyes, large nose, etc. So you see, I only made a punch photograph of each person."[18]

Use of the ticket punch proved tiring and error prone, so Hollerith invented a pantograph "keyboard punch". It featured an enlarged diagram of the card, indicating the positions of the holes to be punched. A printed reading board could be placed under a card that was to be read manually.[19]

Hollerith envisioned a number of card sizes. In an article he wrote describing his proposed system for tabulating the 1890 U.S. Census, Hollerith suggested a card 3 inches by 5½ inches of Manila stock "would be sufficient to answer all ordinary purposes."[20] The cards used in the 1890 census had round holes, 12 rows and 24 columns. A reading board for these cards can be seen at the Columbia University Computing History site.[21] At some point, 3 1⁄4 by 7 3⁄8 inches (82.550 by 187.325 mm) became the standard card size.

Hollerith's original system used an ad-hoc coding system for each application, with groups of holes assigned specific meanings, e.g. sex or marital status. His tabulating machine had up to 40 counters, each with a dial divided into 100 divisions, with two indicator hands; one which stepped one unit with each counting pulse, the other which advanced one unit every time the other dial made a complete revolution. This arrangement allowed a count up to 10,000. During a given tabulating run, each counter was typically assigned a specific hole. Hollerith also used relay logic to allow counts of combination of holes, e.g. to count married females.[20]

Later designs standardized the coding. These cards had ten rows, each row assigned a digit value, 0 through 9, and 45 columns. [22] This provided for a field (adjacent columns) to represent multi-digit numbers that tabulators could sum, instead of their simply counting cards. Hollerith's 45 column punched cards are illustrated in Comrie's The application of the Hollerith Tabulating Machine to Brown's Tables of the Moon.[23][24]

IBM 80-column punched card formats and character codes

A general-purpose punched card from late-twentieth century.
Card from a Fortran program: Z(1) = Y + W(1)

This IBM card format, designed in 1928,[25] has rectangular holes, 80 columns with 12 punch locations each, one character to each column. Card size is exactly 7 3⁄8 by 3 1⁄4 inches (187.325 mm × 82.55 mm). The cards are made of smooth stock, 0.007 inches (180 µm) thick. There are about 143 cards to the inch (56/cm). In 1964, IBM changed from square to round corners.[26] They come typically in boxes of 2000 cards[27] or as continuous form cards. Continuous form cards could be both pre-numbered and pre-punched for document control (checks, for example).[28]

The lower ten positions represented (from top to bottom) the digits 0 through 9. The top two positions of a column were called zone punches, 12 (top) and 11. Originally only numeric information was punched, with 1 punch per column indicating the digit. Signs could be added to a field by overpunching the least significant digit with a zone punch: 12 for plus and 11 for minus. Zone punches had other uses in processing as well, such as indicating a master record.[29]

     ______________________________________________
    /&-0123456789ABCDEFGHIJKLMNOPQR/STUVWXYZ
 Y / x           xxxxxxxxx
 X|   x                   xxxxxxxxx
 0|    x                           xxxxxxxxx
 1|     x        x        x        x
 2|      x        x        x        x
 3|       x        x        x        x
 4|        x        x        x        x
 5|         x        x        x        x
 6|          x        x        x        x
 7|           x        x        x        x
 8|            x        x        x        x
 9|             x        x        x        x
  |________________________________________________

　Reference:[30] Note: The X and Y zones were also called the 11 and 12 zones, respectively.

In 1931 IBM began introducing multiple punches for upper-case letters and special characters.[31][32] A letter has two punches (zone [12,11,0] + digit [1–9]); most special characters have two or three punches (zone [12,11,0,or none] + digit [2–7] + 8); a few special characters were exceptions (in EBCDIC "&" is 12 only, "-" is 11 only, and "/" is 0 + 1). With these changes, the information represented in a column by a combination of zones [12, 11] and digits [1–9] is dependent on the use of that column. For example, the combination "12-1" is the letter "A" in an alphabetic column, a plus signed digit "1" in a signed numeric column, or an unsigned digit "1" in a column where the "12" have some other use. The introduction of EBCDIC in 1964 allowed columns with as many as six punches (zones [12,11,0,8,9] + digit [1–7]). IBM and other manufacturers used many different 80-column card character encodings.[33][34] A 1969 American National Standard defined the punches for 128 characters and was named the Hollerith Punched Card Code (often referred to simply as Hollerith Card Code), honoring Hollerith.[35]

Binary punched card.

For some computer applications, binary formats were used, where each hole represented a single binary digit (or "bit"), every column (or row) is treated as a simple bitfield, and every combination of holes is permitted. For example, the IBM 711 card reader used with the 704/709/7090/7094 series scientific computers treated every row as two 36-bit words, ignoring 8 columns. (The specific 72 columns used were selectable using a plugboard control panel, which is almost always wired to select columns 1–72.) Sometimes the ignored columns (usually 73–80) were used to contain a sequence number for each card, so the card deck could be sorted to the correct order in case it was dropped. An alternative format, used by the IBM 704's IBM 714 native card reader, is referred to as Column Binary or Chinese Binary, and used 3 columns for each 36-bit word.[36] Later computers, such as the IBM 1130 or System/360, used every column. The IBM 1401's card reader could be used in Column Binary mode, which stored two characters in every column, or one 36-bit word in three columns when used as input device for other computers. However, most of the older card punches were not intended to punch more than 3 holes in a column, so they could not be used to produce binary cards.

Invalid "lace cards" such as these pose mechanical problems for card readers.

As a prank, in binary mode, cards could be punched where every possible punch position had a hole. Such "lace cards" lacked structural strength, and would frequently buckle and jam inside the machine.[37]

The 80-column card format dominated the industry, becoming known as just IBM cards, even though other companies made cards and equipment to process them.

A 5081 card from a non-IBM manufacturer.

One of the most common printed punched cards is the IBM 5081 card format, a general purpose layout with no field divisions. This format has digits printed on it corresponding to the punch positions of the digits in each of the 80 columns. Other card vendors manufactured cards with this same layout and number.

Mark sense cards

HP Educational Basic optical mark-reader card.

Aperture cards

Aperture card

IBM Stub cards or Short cards

The 80-column card could be scored, on either end, creating a stub that could be torn off, leaving a stub card or short card. A common length for stub cards was 51-columns. Stub cards were used in applications requiring tags, labels, or carbon copies.[28]

IBM Port-A-Punch

IBM Port-A-Punch
FORTRAN Port-A-Punch card. Compiler directive "SQUEEZE" removed the alternating blank columns from the input. Godfrey Manning.
IBM 96 column punched card

According to the IBM Archive: IBM's Supplies Division introduced the Port-A-Punch in 1958 as a fast, accurate means of manually punching holes in specially scored IBM punched cards. Designed to fit in the pocket, Port-A-Punch made it possible to create punched card documents anywhere. The product was intended for "on-the-spot" recording operations—such as physical inventories, job tickets and statistical surveys—because it eliminated the need for preliminary writing or typing of source documents..[39]

IBM 96-column punched card format

In the early 1970s, IBM introduced a new, smaller, round-hole, 96-column card format along with the IBM System/3 computer. These cards have tiny (1 mm), circular holes, smaller than those in paper tape. Data is stored in six-bit binary-coded decimal code, with three rows of 32 characters each, or 8-bit EBCDIC. In this format, each column of the top tiers are combined with two punch rows from the bottom tier to form an 8-bit byte, and the middle tier is combined with two more punch rows, so that each card contains 64 bytes of 8-bit-per-byte binary coded data.[40]

Powers/Remington Rand UNIVAC card formats

A blank Remington Rand UNIVAC format card. Card courtesy of MIT Museum.
A punched Remington Rand card with an IBM card for comparison

The Powers/Remington Rand card format was initially the same as Hollerith's; 45 columns and round holes. In 1930, Remington Rand leap-frogged IBM's 80 column format from 1928 by coding two characters in each of the 45 columns – producing what is now commonly called the 90-column card.[41] There are two sets of six rows across each card. The rows in each set are labeled 0, 1/2, 3/4, 5/6, 7/8 and 9. The even numbers in a pair are formed by combining that punch with a 9 punch. Alphabetic and special characters use 3 or more punches[42][43]

IBM punched card manufacturing

IBM's Fred M. Carroll[44] developed a series of rotary type presses that were used to produce the well-known standard tabulating cards, including a 1921 model that operated at 400 cards per minute (cpm). Later, he developed a completely different press capable of operating at speeds in excess of 800 cpm, and it was introduced in 1936.[9][45] Carroll's high-speed press, containing a printing cylinder, revolutionized the manufacture of punched tabulating cards.[46] It is estimated that between 1930 and 1950, the Carroll press accounted for as much as 25 percent of the company's profits[47]

Institutions, such as universities, often had their general purpose cards printed with a logo. A wide variety of forms and documents were printed on punched cards, including checks. Such printing did not interfere with the operation of the machinery.
A punched card printing plate.

Discarded printing plates from these card presses, each printing plate the size of an IBM card and formed into a cylinder, often found use as desk pen/pencil holders, and even today are collectible IBM artifacts (every card layout[48] had its own printing plate).

IBM initially required that its customers use only IBM manufactured cards with IBM machines, which were leased, not sold. IBM viewed its business as providing a service and that the cards were part of the machine. In 1932, the US government took IBM to court on this issue. IBM fought all the way to the Supreme Court and lost in 1936; the court ruling that IBM could only set card specifications.[49][50] In another case, heard in 1955, IBM signed a consent decree requiring, amongst other things, that IBM would by 1962 have no more than one-half of the punched card manufacturing capacity in the United States. Tom Watson Jr.'s decision to sign this decree, where IBM saw the punched card provisions as the most significant point, completed the transfer of power to him from Thomas Watson, Sr.[47]

Cultural impact

Cartons of punched cards stored in a United States National Archives Records Service facility in 1959. Each carton could hold 2000 cards.
A punch card tape controlling actuation of the valves of a microfluidics device.

While punched cards have not been widely used for a generation, the impact was so great for most of the 20th century that they still appear from time to time in popular culture. For example:

metaphor... symbol of the "system"—first the registration system and then bureaucratic systems more generally ... a symbol of alienation ... Punched cards were the symbol of information machines, and so they became the symbolic point of attack. Punched cards, used for class registration, were first and foremost a symbol of uniformity. .... A student might feel "he is one of out of 27,500 IBM cards" ... The president of the Undergraduate Association criticized the University as "a machine ... IBM pattern of education."... Robert Blaumer explicated the symbolism: he referred to the "sense of impersonality... symbolized by the IBM technology."... ––Steven Lubar[56]

In Arthur C. Clarke's early short story Rescue Party, the alien explorers find a "... wonderful battery of almost human Hollerith analyzers and the five thousand million punched cards holding all that could be recorded on each man, woman and child on the planet". Writing in 1946, Clarke, like almost all sci-fi authors, had not then foreseen the development and eventual ubiquity of the computer.

Standards

Card handling equipment

Creation and processing of punched cards was handled by a variety of devices, including:

See also

References

  1. ↑ Cortada, James W. (1993) Before The Computer: IBM, NCR, Burroughs, & Remington Rand & The Industry They Created, 1865 - 1965, Princeton
  2. ↑ "Nightly News Aired on December 27, 2012 - Punch card voting lingers". Video.msnbc.msn.com. Retrieved 2013-10-05.
  3. ↑ "California Tab Card Company".
  4. ↑ Semen Korsakov's inventions, Cybernetics Dept. of MEPhI (Russian)
  5. ↑ Trogemann, Georg (eds.); et al. (2001). Computing in Russia. Verlag. pp. 47–49. The article is by Gellius N. Povarov, titled Semen Nikolayevich Korsakov- Machines for the Comparison of Philosophical Ideas
  6. ↑ Babbage, Charles (26 Dec 1837). On the Mathematical Powers of the Calculating Engine.
  7. ↑ "Columbia University Computing History – Herman Hollerith". Columbia University, Columbia.edu. Retrieved 2013-10-05.
  8. ↑ "History of the punch card". Whatis.techtarget.com. Retrieved 2013-10-05.
  9. 1 2 "IBM Archive: Endicott card manufacturing". 03.ibm.com. Retrieved 2013-10-05.
  10. ↑ Lubar, Steven (1993). InfoCulture: The Smithsonian Book of Information Age Inventions. Houghton Mifflin. p. 302. ISBN 0-395-57042-5.
  11. ↑ Aspray (ed.), W. (1990). Computing before Computers. Iowa State University Press. p. 151. ISBN 0-8138-0047-1.
  12. ↑ "An important function in IBM Accounting is the automatic preparation of IBM cards." IBM 519 Principles of Operation, Form 22-3292-5, 1946
  13. ↑ "The IBM 1402 Card Read-Punch provides the system with simultaneous punched-card input and output. This unit has two card feeds." Reference Manual 1401 Data Processing System, Form A24-1403-4, 1961
  14. ↑ Truedsell, Leon E. (1965). The Development of Punch Card Tabulation in the Bureau of the Census 1890-1940. US GPO.
  15. ↑ IBM (1956). The Design of IBM Cards (PDF). 22-5526-4.
  16. ↑ "Hollerith's Electric Tabulating Machine". Railroad Gazette. April 19, 1895. Retrieved 2015-06-04.
  17. ↑ U.S. Patent 395,781, U.S. Patent 395,782, U.S. Patent 395,783
  18. ↑ (Austrian 1982, p.15)
  19. ↑ (Truesdell 1965, p.43)
  20. 1 2 [-245-] An Electric Tabulating System, The Quarterly, Columbia University School of Mines, Vol.X No.16 (April 1889)
  21. ↑ "Columbia University Computing History: Hollerith 1890 Census Tabulator". Columbia University, Columbia.edu. Retrieved 2013-10-05.
  22. ↑ Bashe, Charles J.; Johnson, Lyle R.; Palmer, John H.; Pugh, Emerson W. (1986). IBM's Early Computers. Cambridge, Massachusetts: The MIT Press. p. 5. ISBN 0-262-02225-7. Also see pages 5-14 for additional information on punched cards.
  23. ↑ Plates from: Comrie, L.J. (1932). "The application of the Hollerith Tabulating Machine to Brown's Tables of the Moon". Monthly Notices of the Royal Astronomical Society 92 (7): 694–707. Bibcode:1932MNRAS..92..694C. doi:10.1093/mnras/92.7.694.
  24. ↑ Comrie, L.J. (1932). "The application of the Hollerith tabulating machine to Brown's tables of the moon". Monthly Notices of the Royal Astronomical Society 92 (7): 694–707. Bibcode:1932MNRAS..92..694C. doi:10.1093/mnras/92.7.694. Retrieved 2009-04-17.
  25. ↑ IBM Archive: 1928.
  26. ↑ IBM Archive: Old/New-Cards.
  27. ↑ p. 405, "How Computational Chemistry Became Important in the Pharmaceutical Industry", Donald B. Boyd, chapter 7 in Reviews in Computational Chemistry, Volume 23, edited by Kenny B. Lipkowitz, Thomas R. Cundari and Donald B. Boyd, Wiley & Son, 2007, ISBN 978-0-470-08201-0.
  28. 1 2 IBM (1953). Principles of IBM Accounting. 224-5527-2.
  29. ↑ IBM, Functional Wiring Principles (any edition)
  30. ↑ "Punched Card Codes". Cs.uiowa.edu. Retrieved 2013-10-05.
  31. ↑ Pugh, Emerson W. (1995). Building IBM: Shaping and Industry and Its Technology. MIT Press. pp. 50–51. ISBN 978-0-262-16147-3.
  32. ↑ Special characters are non-alphabetic, non-numeric, such as "&#,$.-/@%*?"
  33. ↑ Winter, Dik T. "80-column Punched Card Codes". Archived from the original on April 8, 2007. Retrieved November 6, 2012.
  34. ↑ Jones, Douglas W. "Punched Card Codes". Retrieved February 20, 2007.
  35. ↑ Mackenzie, C.E. (1980). Coded Character Sets, History and Development, Addison-Wesley, page 7
  36. ↑ Thelen, Ed. "Chinese Binary". Retrieved 12 December 2013.
  37. ↑ Raymond, Eric S. (1991). The New Hacker's Dictionary. Cambridge, MA: MIT Press. p. 219.
  38. ↑ LoTurco, Ed (January 2004). "The Engineering Aperture Card: Still Active, Still Vital" (PDF). EDM Consultants. Archived from the original (PDF) on November 28, 2007. Retrieved October 10, 2007.
  39. ↑ "IBM Archive: Port-A-Punch". 03.ibm.com. Retrieved 2013-10-05.
  40. ↑ Winter, Dik T. "96-column Punched Card Code". Archived from the original on April 15, 2007. Retrieved November 6, 2012.
  41. ↑ Aspray (ed.). op. cit. p. 142.
  42. ↑ "The Punched Card". Quadibloc.com. Retrieved 2013-10-05.
  43. ↑ Winter, Dik T. "90-column Punched Card Code". Archived from the original on February 28, 2005. Retrieved November 6, 2012.
  44. ↑ "IBM Archives/Business Machines: Fred M. Carroll". 03.ibm.com. Retrieved 2013-10-05.
  45. ↑ "IBM Archives: Fred M. Carroll". 03.ibm.com. Retrieved 2013-10-05.
  46. ↑ "IBM Archives: (IBM) Carroll Press". 03.ibm.com. Retrieved 2013-10-05.
  47. 1 2 Belden, Thomas; Belden, Marva (1962). The Lengthening Shadow: The Life of Thomas J. Watson. Little, Brown & Company.
  48. ↑ "IBM Archives:1939 Layout department". 03.ibm.com. Retrieved 2013-10-05.
  49. ↑ "International Business Machines Corp. v. United States, 298 U.S. 131 (1936)". Justia.
  50. ↑ Belden (1962) pp.300-301
  51. ↑ "Mayalin.com". Mayalin.com. 2009-01-08. Retrieved 2013-10-05.
  52. ↑ Washingtonpavilion.org Archived April 24, 2010 at the Wayback Machine
  53. ↑ "University of Wisconsin-Madison Buildings:". Fpm.wisc.edu. Retrieved 2013-10-05.
  54. ↑ "business.und.ed". Business.und.edu. 2013-09-24. Retrieved 2013-10-05.
  55. ↑ "Photo of Gamble Hall by gatty790". Panoramio.com. Retrieved 2013-10-05.
  56. ↑ Lubar, Steven. "Do Not Fold, Spindle Or Mutilate: A Cultural History Of The Punch Card" (PDF). Journal of American Culture 1992 (Winter). Retrieved June 12, 2011.

Further reading

External links

Wikimedia Commons has media related to Punch card.
This article is issued from Wikipedia - version of the Sunday, January 31, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.