IBM 1030
The IBM 1030 Data Collection System was a remote terminal system created by IBM Endicott in 1963[1] intended to transmit data from remote locations to a central computer system.[2]
Description
The system consisted of the following components:[3]
- 1031 Input Station. The 1031 systems could contain a card reader, badge reader, or manual input device. The 1031A contained the communications logic required to transmit data to a remote computer system ("central output unit" in IBM terminology). The 1031B communicated through an attached 1031A.
- 1032 Digital Time Unit. This device was located at central site and provided timestamps to incoming data.
- 1033 Printer. This was a remote printer attached to the 1031A.
- 1034 Card Punch. The 1034 was located at the central site and functioned as an output device for the 1030 when the computer system was offline.
- 1035 Badge Reader
The 1030 had limited editing capabilities, which consisted of checking that all required data was entered before transmitting a transaction.
The 1030 originally attached to an IBM 1440 computer through a 1448 Transmission Control Unit. Later it could be attached to an IBM System/360.
References
- ↑ IBM Corporation. "Endicott chronology 1961-1969". Retrieved August 30, 2012.
- ↑ IBM Corporation. IBM Customer Engineering introduction to 1030 Data Collection System (PDF).
- ↑ IBM Sales Manual, May 79
This article is issued from Wikipedia - version of the Friday, March 28, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.