HMAS Latrobe

HMAS Latrobe
History
Australia
Namesake: Town of Latrobe, Tasmania
Builder: Mort's Dock and Engineering Company
Laid down: 27 January 1942
Launched: Floated 19 June 1942
Commissioned: 6 November 1942
Decommissioned: 13 March 1953
Reclassified: Training ship (1946)
Honours and
awards:
Fate: Sold for scrap, 18 May 1956
General characteristics
Class & type: Bathurst-class corvette
Displacement: 650 tons (standard), 1,025 tons (full war load)
Length: 180 ft 10 in (55.12 m)
Beam: 31 ft 2 in (9.50 m)
Draught: 8 ft 6 in (2.59 m)
Propulsion: triple expansion engine, 2 shafts
Speed: 15.5 knots (28.7 km/h; 17.8 mph) at 2,000 hp
Complement: 85
Armament: 1 × 4-inch gun, 3 × Oerlikons

HMAS Latrobe (J234/M234), named for the town of Latrobe, Tasmania, was one of 60 Bathurst-class corvettes constructed during World War II, and one of 36 initially manned and commissioned solely by the Royal Australian Navy (RAN).[1]

Design and construction

In 1938, the Australian Commonwealth Naval Board (ACNB) identified the need for a general purpose 'local defence vessel' capable of both anti-submarine and mine-warfare duties, while easy to construct and operate.[2][3] The vessel was initially envisaged as having a displacement of approximately 500 tons, a speed of at least 10 knots (19 km/h; 12 mph), and a range of 2,000 nautical miles (3,700 km; 2,300 mi)[4] The opportunity to build a prototype in the place of a cancelled Bar-class boom defence vessel saw the proposed design increased to a 680-ton vessel, with a 15.5 knots (28.7 km/h; 17.8 mph) top speed, and a range of 2,850 nautical miles (5,280 km; 3,280 mi), armed with a 4-inch gun, equipped with asdic, and able to fitted with either depth charges or minesweeping equipment depending on the planned operations: although closer in size to a sloop than a local defence vessel, the resulting increased capabilities were accepted due to advantages over British-designed mine warfare and anti-submarine vessels.[2][5] Construction of the prototype HMAS Kangaroo did not go ahead, but the plans were retained.[6] The need for locally built 'all-rounder' vessels at the start of World War II saw the "Australian Minesweepers" (designated as such to hide their anti-submarine capability, but popularly referred to as "corvettes") approved in September 1939, with 60 constructed during the course of the war: 36 (including Latrobe) ordered by the RAN, 20 ordered by the British Admiralty but manned and commissioned as RAN vessels, and 4 for the Royal Indian Navy.[2][7][8][9][1]

Latrobe's dimensions differed from the Bathurst-class design: she was shorter (180 ft 10 in (55.12 m) compared to 186 ft (57 m)) and had a slightly wider beam (31 ft 2 in (9.50 m) compared to 31 ft (9.4 m)).[1]

Latrobe was laid down by Mort's Dock and Engineering Company at Balmain, New South Wales on 27 January 1942.[1] As the ship was built in a dock it was floated clear on 19 June 1942, with the ceremony officiated by the Reverend A. G. Rix. The ship was commissioned into the RAN on 6 November 1942.[1]

Operational history

After entering active service, Latrobe initially served as a convoy escort ship, first between Queensland and New Guinea, then between Darwin and Thursday Island.[1] On 12 February 1943, the corvette unsuccessfully attacked a Japanese submarine.[1] In July, a Darwin-bound convoy escorted by Latrobe was attacked twice by Japanese aircraft, and in December, a lone Japanese bomber attempted to attack the corvette.[1]

In June 1944, Latrobe was reassigned to New Guinea operations, and arrived on 17 June.[1] She spent seven omnths operating as a convoy escort and anti-submarine patrol ship, before sailing to Adelaide in January 1945 for a two-month refit.[1] Latrobe returned to New Guinea in late April, and served in numerous roles until the end of World War II, including escort, patrol, minesweeping, and shore bombardment.[1]

The corvette received four battle honours for her wartime service: "Darwin 1943", "Pacific 1943–45", "New Guinea 1943–44", and "Borneo 1945".[10][11]

After the end of the war, Latrobe was involved in the evacuation of Allied prisoners-of-war, and the transportation of occupation forces.[1] She returned to Australia in December 1945, towing two small craft to Sydney before proceeding to Melbourne.[1] In early 1946, the corvette was attached to Flinders Naval Depot for use as a training ship until the end of 1952.[1]

Decommissioning and fate

Latrobe paid off on 13 March 1953.[1] She was placed in reserve on 17 September 1953, where she remained until she was sold for breaking up as scrap to the Hong Kong Rolling Mills on 18 May 1956.[1]

Citations

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 "HMAS Latrobe". HMA Ship Histories. Sea Power Centre – Royal Australian Navy. Retrieved 27 December 2008.
  2. 1 2 3 Stevens, The Australian Corvettes, p. 1
  3. ↑ Stevens, A Critical Vulnerability, p. 103
  4. ↑ Stevens, A Critical Vulnerability, pp. 103–4
  5. ↑ Stevens, A Critical Vulnerability, pp. 103–5
  6. ↑ Stevens, A Critical Vulnerability, p. 104
  7. ↑ Stevens, A Critical Vulnerability, pp. 105, 148
  8. ↑ Donohue, From Empire Defence to the Long Haul, p. 29
  9. ↑ Stevens et al., The Royal Australian Navy, p. 108
  10. ↑ "Navy Marks 109th Birthday With Historic Changes To Battle Honours". Royal Australian Navy. 1 March 2010. Archived from the original on 13 June 2011. Retrieved 23 December 2012.
  11. ↑ "Royal Australian Navy Ship/Unit Battle Honours" (PDF). Royal Australian Navy. 1 March 2010. Archived from the original (PDF) on 14 June 2011. Retrieved 23 December 2012.

References

Books
Journal and news articles

External links

Wikimedia Commons has media related to HMAS Latrobe (ship, 1942).


This article is issued from Wikipedia - version of the Tuesday, February 09, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.