Linear feedback shift register

"LFSR" redirects here. For the airport using that ICAO code, see Reims – Champagne Air Base.
A 4-bit Fibonacci LFSR with its state diagram. The XOR gate provides feedback to the register that shifts bits from left to right. The maximal sequence consists of every possible state except the "0000" state.

In computing, a linear-feedback shift register (LFSR) is a shift register whose input bit is a linear function of its previous state.

The most commonly used linear function of single bits is exclusive-or (XOR). Thus, an LFSR is most often a shift register whose input bit is driven by the XOR of some bits of the overall shift register value.

The initial value of the LFSR is called the seed, and because the operation of the register is deterministic, the stream of values produced by the register is completely determined by its current (or previous) state. Likewise, because the register has a finite number of possible states, it must eventually enter a repeating cycle. However, an LFSR with a well-chosen feedback function can produce a sequence of bits which appears random and which has a very long cycle.

Applications of LFSRs include generating pseudo-random numbers, pseudo-noise sequences, fast digital counters, and whitening sequences. Both hardware and software implementations of LFSRs are common.

The mathematics of a cyclic redundancy check, used to provide a quick check against transmission errors, are closely related to those of an LFSR.

Fibonacci LFSRs

A 16-bit Fibonacci LFSR. The feedback tap numbers in white correspond to a primitive polynomial in the table so the register cycles through the maximum number of 65535 states excluding the all-zeroes state. The state shown, 0xACE1 (hexadecimal) will be followed by 0x5670.

The bit positions that affect the next state are called the taps. In the diagram the taps are [16,14,13,11]. The rightmost bit of the LFSR is called the output bit. The taps are XOR'd sequentially with the output bit and then fed back into the leftmost bit. The sequence of bits in the rightmost position is called the output stream.

The sequence of numbers generated by an LFSR or its XNOR counterpart can be considered a binary numeral system just as valid as Gray code or the natural binary code.

The arrangement of taps for feedback in an LFSR can be expressed in finite field arithmetic as a polynomial mod 2. This means that the coefficients of the polynomial must be 1's or 0's. This is called the feedback polynomial or reciprocal characteristic polynomial. For example, if the taps are at the 16th, 14th, 13th and 11th bits (as shown), the feedback polynomial is

x^{16} + x^{14} + x^{13} + x^{11} + 1.\,

The 'one' in the polynomial does not correspond to a tap – it corresponds to the input to the first bit (i.e. x0, which is equivalent to 1). The powers of the terms represent the tapped bits, counting from the left. The first and last bits are always connected as an input and output tap respectively.

The LFSR is maximal-length if and only if the corresponding feedback polynomial is primitive. This means that the following conditions are necessary (but not sufficient):

Tables of primitive polynomials from which maximum-length LFSRs can be constructed are given below and in the references.

There can be more than one maximum-length tap sequence for a given LFSR length. Also, once one maximum-length tap sequence has been found, another automatically follows. If the tap sequence, in an n-bit LFSR, is [n, A, B, C, 0], where the 0 corresponds to the x0 = 1 term, then the corresponding 'mirror' sequence is [n, n  C, n  B, n  A, 0]. So the tap sequence [32, 7, 3, 2, 0] has as its counterpart [32, 30, 29, 25, 0]. Both give a maximum-length sequence.

Some example C code is below:

# include <stdint.h>
int main(void)
{
    uint16_t start_state = 0xACE1u;  /* Any nonzero start state will work. */
    uint16_t lfsr = start_state;
    uint16_t bit;                    /* Must be 16bit to allow bit<<15 later in the code */
    unsigned period = 0;

    do
    {
        /* taps: 16 14 13 11; feedback polynomial: x^16 + x^14 + x^13 + x^11 + 1 */
        bit  = ((lfsr >> 0) ^ (lfsr >> 2) ^ (lfsr >> 3) ^ (lfsr >> 5) ) & 1;
        lfsr =  (lfsr >> 1) | (bit << 15);
        ++period;
    } while (lfsr != start_state);

    return 0;
}

This LFSR configuration is also known as standard, many-to-one or external XOR gates. The alternative Galois configuration is described in the next section.

Galois LFSRs

Named after the French mathematician Évariste Galois, an LFSR in Galois configuration, which is also known as modular, internal XORs as well as one-to-many LFSR, is an alternate structure that can generate the same output stream as a conventional LFSR (but offset in time).[2] In the Galois configuration, when the system is clocked, bits that are not taps are shifted one position to the right unchanged. The taps, on the other hand, are XOR'd with the output bit before they are stored in the next position. The new output bit is the next input bit. The effect of this is that when the output bit is zero all the bits in the register shift to the right unchanged, and the input bit becomes zero. When the output bit is one, the bits in the tap positions all flip (if they are 0, they become 1, and if they are 1, they become 0), and then the entire register is shifted to the right and the input bit becomes 1.

A 16-bit Galois LFSR. The register numbers in white correspond to the same primitive polynomial as the Fibonacci example but are counted in reverse to the shifting direction. This register also cycles through the maximal number of 65535 states excluding the all-zeroes state. The state ACE1 hex shown will be followed by E270 hex.

To generate the same output stream, the order of the taps is the counterpart (see above) of the order for the conventional LFSR, otherwise the stream will be in reverse. Note that the internal state of the LFSR is not necessarily the same. The Galois register shown has the same output stream as the Fibonacci register in the first section. A time offset exists between the streams, so a different startpoint will be needed to get the same output each cycle.

Below is a C code example for the 16 bit maximal period Galois LFSR example in the figure:

# include <stdint.h>
int main(void)
{
    uint16_t start_state = 0xACE1u;  /* Any nonzero start state will work. */
    uint16_t lfsr = start_state;
    unsigned period = 0;

    do
    {
        unsigned lsb = lfsr & 1;   /* Get LSB (i.e., the output bit). */
        lfsr >>= 1;                /* Shift register */
        lfsr ^= (-lsb) & 0xB400u;  /* If the output bit is 1, apply toggle mask.
                                    * The value has 1 at bits corresponding
                                    * to taps, 0 elsewhere. */
        ++period;
    } while (lfsr != start_state);

    return 0;
}

Non-binary Galois LFSR

Binary Galois LFSRs like the ones shown above can be generalized to any q-ary alphabet {0, 1, ..., q  1} (e.g., for binary, q is equal to two, and the alphabet is simply {0, 1}). In this case, the exclusive-or component is generalized to addition modulo-q (note that XOR is addition modulo 2), and the feedback bit (output bit) is multiplied (modulo-q) by a q-ary value which is constant for each specific tap point. Note that this is also a generalization of the binary case, where the feedback is multiplied by either 0 (no feedback, i.e., no tap) or 1 (feedback is present). Given an appropriate tap configuration, such LFSRs can be used to generate Galois fields for arbitrary prime values of q.

Some polynomials for maximal LFSRs

The following table lists maximal-length polynomials for shift-register lengths up to 19. Note that more than one maximal-length polynomial may exist for any given shift-register length. A list of alternative maximal-length polynomials for shift-register lengths 4-32 (beyond which it becomes unfeasible to store or transfer them) can be found here: http://www.ece.cmu.edu/~koopman/lfsr/index.html

Bits Feedback polynomial Period
n 2^n - 1
2 x^2 + x + 1 3
3 x^3 + x^2 + 1 7
4 x^4 + x^3 + 1 15
5 x^{ 5 }+x^{ 3 }+1 31
6 x^{ 6 }+x^{ 5 }+1 63
7 x^{ 7 }+x^{ 6 }+1 127
8 x^{ 8 }+x^{ 6 }+x^{ 5 }+x^{ 4 }+1 255
9 x^{ 9 }+x^{ 5 }+1 511
10 x^{ 10 }+x^{ 7 }+1 1023
11 x^{ 11 }+x^{ 9 }+1 2047
12 x^{ 12 }+x^{ 11 }+x^{ 10 }+x^{ 4 }+1 4095
13 x^{ 13 }+x^{ 12 }+x^{ 11 }+x^{ 8 }+1 8191
14 x^{ 14 }+x^{ 13 }+x^{ 12 }+x^{ 2 }+1 16383
15 x^{ 15 }+x^{ 14 }+1 32767
16 x^{ 16 }+x^{ 15 }+x^{ 13 }+x^{ 4 }+1 65535
17 x^{ 17 }+x^{ 14 }+1 131071
18 x^{ 18 }+x^{ 11 }+1 262143
19 x^{ 19 }+x^{ 18 }+x^{ 17 }+x^{ 14 }+1 524287
20-168
2-786,1024,2048,4096

Output-stream properties

Applications

LFSRs can be implemented in hardware, and this makes them useful in applications that require very fast generation of a pseudo-random sequence, such as direct-sequence spread spectrum radio. LFSRs have also been used for generating an approximation of white noise in various programmable sound generators.

Uses as counters

The repeating sequence of states of an LFSR allows it to be used as a clock divider, or as a counter when a non-binary sequence is acceptable as is often the case where computer index or framing locations need to be machine-readable.[3] LFSR counters have simpler feedback logic than natural binary counters or Gray code counters, and therefore can operate at higher clock rates. However it is necessary to ensure that the LFSR never enters an all-zeros state, for example by presetting it at start-up to any other state in the sequence. The table of primitive polynomials shows how LFSRs can be arranged in Fibonacci or Galois form to give maximal periods. One can obtain any other period by adding to an LFSR that has a longer period some logic that shortens the sequence by skipping some states.

Uses in cryptography

LFSRs have long been used as pseudo-random number generators for use in stream ciphers (especially in military cryptography), due to the ease of construction from simple electromechanical or electronic circuits, long periods, and very uniformly distributed output streams. However, an LFSR is a linear system, leading to fairly easy cryptanalysis. For example, given a stretch of known plaintext and corresponding ciphertext, an attacker can intercept and recover a stretch of LFSR output stream used in the system described, and from that stretch of the output stream can construct an LFSR of minimal size that simulates the intended receiver by using the Berlekamp-Massey algorithm. This LFSR can then be fed the intercepted stretch of output stream to recover the remaining plaintext.

Three general methods are employed to reduce this problem in LFSR-based stream ciphers:

Important LFSR-based stream ciphers include A5/1 and A5/2, used in GSM cell phones, E0, used in Bluetooth, and the shrinking generator. The A5/2 cipher has been broken and both A5/1 and E0 have serious weaknesses.[5][6]

The linear feedback shift register has a strong relationship to linear congruential generators.[7]

Uses in circuit testing

LFSRs are used in circuit testing, for test-pattern generation (for exhaustive testing, pseudo-random testing or pseudo-exhaustive testing) and for signature analysis.

Test-pattern generation

Complete LFSR are commonly used as pattern generators for exhaustive testing, since they cover all possible inputs for an n input circuit. Maximum length LFSRs and weighted LFSRs are widely used as pseudo-random test pattern generators for pseudo-random test applications.

Signature analysis

In built-in self-test (BIST) techniques, storing all the circuit outputs on chip is not possible, but the circuit output can be compressed to form a signature that will later be compared to the golden signature (of the good circuit) to detect faults. Since this compression is lossy, there is always a possibility that a faulty output also generates the same signature as the golden signature and the faults cannot be detected. This condition is called error masking or aliasing. BIST is accomplished with a multiple-input signature register (MISR or MSR), which is a type of LFSR. A standard LFSR has a single XOR or XNOR gate, where the input of the gate is connected to several "taps" and the output is connected to the input of the first flip-flop. A MISR has the same structure, but the input to every flip-flop is fed through an XOR/XNOR gate. For example, a four-bit MISR has a four-bit parallel output and a four-bit parallel input. The input of the first flip-flop is XOR/XNORd with parallel input bit zero and the "taps." Every other flip-flop input is XOR/XNORd with the preceding flip-flop output and the corresponding parallel input bit. Consequently, the next state of the MISR depends on the last several states opposed to just the current state. Therefore, a MISR will always generate the same golden signature given that the input sequence is the same every time.

Uses in digital broadcasting and communications

Scrambling

Main article: Scrambler

To prevent short repeating sequences (e.g., runs of 0's or 1's) from forming spectral lines that may complicate symbol tracking at the receiver or interfere with other transmissions, the data bit sequence is combined with the output of a linear feedback register before modulation and transmission. This scrambling is removed at the receiver after demodulation. When the LFSR runs at the same bit rate as the transmitted symbol stream, this technique is referred to as scrambling. When the LFSR runs considerably faster than the symbol stream, the LFSR-generated bit sequence is called chipping code. The chipping code is combined with the data using exclusive or before transmitting using binary phase shift keying or a similar modulation method. The resulting signal has a higher bandwidth than the data and therefore this is a method of spread spectrum communication. When used only for the spread spectrum property, this technique is called direct-sequence spread spectrum; when used to distinguish several signals transmitted in the same channel at the same time and frequency it is called code division multiple access.

Neither scheme should be confused with encryption or encipherment; scrambling and spreading with LFSRs do not protect the information from eavesdropping. They are instead used to produce equivalent streams that possess convenient engineering properties to allow for robust and efficient modulation and demodulation.

Digital broadcasting systems that use linear feedback registers:

Other digital communications systems using LFSRs:

Other uses

LFSRs are also used in Communications System Jamming systems to generate pseudo-random noise to raise the noise floor of a target communication system.

The German time signal DCF77, in addition to amplitude keying, employs phase-shift keying driven by a 9-stage LFSR to increase the accuracy of received time and the robustness of the data stream in the presence of noise.[9]

See also

References

  1. Linear Feedback Shift Registers in Virtex Devices
  2. Beker, Henry; Piper, Fred (1982). Cipher Systems: The Protection of Communications. Wiley-Interscience. p. 212.
  3. 1 2 http://www.xilinx.com/support/documentation/application_notes/xapp052.pdf
  4. A. Poorghanad, A. Sadr, A. Kashanipour" Generating High Quality Pseudo Random Number Using Evolutionary Methods", IEEE Congress on Computational Intelligence and Security, vol. 9, pp. 331-335 , May,2008
  5. Barkam, Elad; Biham, Eli; Keller, Nathan (2008), "Instant Ciphertext-Only Cryptanalysis of GSM Encrypted Communication" (PDF), Journal of Cryptology 21 (3): 392–429, doi:10.1007/s00145-007-9001-y
  6. Lu, Yi; Willi Meier; Serge Vaudenay (2005). "The Conditional Correlation Attack: A Practical Attack on Bluetooth Encryption". Crypto 2005 (Santa Barbara, California, USA) 3621: 97–117. doi:10.1007/11535218_7.
  7. RFC 4086 section 6.1.3 "Traditional Pseudo-random Sequences"
  8. Section 9.5 of the SATA Specification, revision 2.6
  9. Hetzel, P. (16 March 1988). Time dissemination via the LF transmitter DCF77 using a pseudo-random phase-shift keying of the carrier (PDF). 2nd European Frequency and Time Forum. Neuchâtel. pp. 351–364. Retrieved 11 October 2011.

External links

This article is issued from Wikipedia - version of the Thursday, February 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.