G1/S transition
The G1/S transition is a stage in the cell cycle at the boundary between the G1 phase, in which the cell grows, and the S phase, during which DNA is replicated.[1]
During this transition, G1 cyclin D-Cdk4/6 dimer phosphorylates retinoblastoma releasing transcription factor E2F, which then drives the transition from G1 to S phase. The G1/S transition is highly regulated by transcription factor p53 in order to halt the cell cycle when DNA is damaged.[2]
It is a "point of no return" beyond which the cell is committed to dividing; in yeast this is called START and in multicellular eukaryotes it is termed the restriction point.
Cell cycle overview
The cell cycle is a process in which an ordered set of events leads to the growth and division into two daughter cells. The cell cycle is a cycle rather than a linear process because the two daughter cells produced repeat the cycle. This process contains two main phases, interphase, in which the cell grows and synthesizes a copy of its DNA, and the mitotic (M) phase, during which the cell separates its DNA and divides into two new daughter cells.[2] Interphase is further broken down into the G1 (GAP 1) phase, S (Synthesis) phase, G2 (GAP 2) phase and the mitotic phase is broken down into mitosis and cytokinesis. During G1 phase, the cells that come out of mitosis grow larger and monitor the environment so that DNA can be replicated. Once the cells are large enough, the cell transitions into S phase and DNA is replicated in the nucleus. During S phase, the cell also duplicates the centrosome, or microtubule-organizing center, which is critical for DNA separation in the M phase. After complete synthesis of its DNA, the cell enters the G2 phase where it continues to grow in preparation for mitosis. Following interphase, the cell transitions into mitosis, containing four sub stages: prophase, anaphase, metaphase, and telophase. In mitosis, DNA condenses into chromosomes, which are lined up and separated by the mitotic spindle.[3] After duplicate DNA is separated on opposite ends of the cell, the cytoplasm of the cell is split in two during cytokinesis resulting in two daughter cells.[2]
Cell cycle regulation
As with most processes in the body, the cell cycle is highly regulated to prevent the synthesis of mutated cells and uncontrolled cell division that leads to tumor formation.[4] The cell cycle control system is biochemically based so that the proteins of the mitosis promoting factor (MPF) control the transition from one phase to the next based on a series of checkpoints. MPF is a protein dimer made up of cyclin and cyclin-dependent kinase (Cdk), a serine and threonine kinase, which come together at different points in the cycle to control cell progression through the cycle. When cyclin binds to Cdk, Cdk becomes activated and phosphorylates serine and threonine on other proteins causing the activation and degradation of other proteins allowing the cell to transition through the cell cycle.[2]
G1/Transition
In mid to late G1 phase, cyclin D bound to Cdk4/6 activates the expression of the S phase cyclin-Cdk components; however, the cell does not want S phase cyclins to become active in G1.[2] Therefore, an inhibitor, protein Slc-1, is present that interacts with the dimer so that the S phase cylcin-Cdk dimer remains inactive until the cell is ready to move into S phase.[2] After the cell has grown and is ready to synthesize DNA, G1 cyclin-Cdks phosphorylate the S phase cyclin inhibitor signaling ubiquination, resulting in the addition of groups to the inhibitor. Ubiquination of the inhibitor signals the SCF/proteasome to degrade the inhibitor releasing and allowing the S phase cyclin-Cdk to become activated and the cell moves into S phase. Once in S phase, cyclin-Cdks phosphorylate several factors on the replication complex promoting DNA replication by causing inhibitory proteins to fall off of replication complexes or through activation of components on the replication complex to induce DNA replication initiation.[5]
Retinoblastoma and the G1/S transition
Another dimer present during mid G1 is composed of retinoblastoma (Rb) protein and transcription factor E2F. When Rb is bound to E2F, E2F is inactive. As cyclin D is synthesized and activates Cdk4/6, the cylcin-Cdk targets Rb protein for phosphorylation. Upon phosphorylation, Rb changes conformation so that E2F is released and activated, binding to upstream regions of genes, initiating expression. Specifically, E2F drives the expression of other cyclins, including cyclin E and A, and genes necessary for DNA replication. Cyclin E either phosphorylates more Rb to further activate E2F and promote the expression of more Cyclin E, or it has the ability to increase expression of itself. Cyclin E also interacts with Cdk2 driving the cell cycle to progress from G1 to S phase.[6]
The role of retinoblastoma in tumor formation
Retinoblastoma (Rb) is a cancer of the eye due to a mutant Rb protein.[2] When Rb is mutated it becomes nonfunctional and is not able to inhibit the expression of transcription factor E2F. Therefore, E2F is always active and driving the cell cycle to progress from G1 to S phase. As a result, cell growth and division is unregulated causing tumor formation in the eye.[4]
Cell cycle checkpoints
To ensure proper cell division, the cell cycle utilizes numerous checkpoints to monitor cell progression and halt the cycle when processes go awry. These checkpoints include four DNA damage checkpoints, one unreplicated DNA checkpoint at the end of G2, one spindle assembly checkpoint in mitosis, and a chromosome segregation checkpoint during mitosis.[4]
p53 as a regulator
Between G1 and S phase, three DNA damage checkpoints occur to ensure proper growth and synthesis of DNA prior to cell division. Damaged DNA during G1, before entry into S phase, and during S phase result in the expression of ATM/R protein. ATM/R protein then stabilizes and activates transcription factor p53 so that it can bind to upstream regions of genes, inducing the expression of proteins including p21CIP. p21CIP binds to and inhibits any cyclin-cdk present in the cell cycle, halting the cycle until DNA damage can be corrected.[7]
Additional processes at DNA damage checkpoints
Of the four DNA damage checkpoints, two have an additional process for monitoring DNA damage other than activating p53. Before entry into S phase and during S phase, ATM/R also activates Chk1/2 that inhibits Cdc25A, a protein responsible for activating cyclin-Cdk dimers. Without cyclin dimer activation, the cell cannot transition through the cycle. These two checkpoints have additional processes for regulation because replicating damaged DNA in S phase can be deleterious to the cell and more importantly, the organism.[2]
See also
References
- ↑ Bartek J, Lukas J (2001). "Pathways governing G1/S transition and their response to DNA damage". FEBS Lett. 490 (3): 117–22. doi:10.1016/S0014-5793(01)02114-7. PMID 11223026.
- 1 2 3 4 5 6 7 8 Lodish, Harvey; Berk, Arnold; Kaiser, Chris; Krieger, Monty (2012). Molecular Cell Biology (7th 13 ed.). Freeman, W. H. & Company. ISBN 9781464109812.
- ↑ "Phases of the Cell Cycle". KhanAcademy. KhanAcademy. Retrieved 2015.
- 1 2 3 Alao, J. P. (2007). "The regulation of cyclin D1 degradation: roles in cancer development and the potential for therapeutic invention". Molecular Cancer.
- ↑ Poli, Alessandro (2015). "New DAG-dependent mechanisms modulate cell cycle progression [Dissertation]". Scienze biomediche. doi:10.6092/unibo/amsdottorato/6739.
- ↑ Fadila, Guessous; Jinho, Heo; Vaddadi, Naga; Abbas, Tarek (2015). "Novel regulation of cyclin D1 stability and the DNA damage response". In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research. doi:10.1158/1538-7445.AM2015-3786.
- ↑ Wang, X; Simpson, E; Brown, K (2015). "p53: Protection against Tumor Growth beyond Effects on Cell Cycle and Apoptosis.". American Association for Cancer Research. doi:10.1158/0008-5472.CAN-15-0563.