Ford Falcon (XP)

For a complete overview of all Falcon models, see Ford Falcon (Australia).
Ford XP Falcon

Ford Falcon Deluxe Sedan (XP)
Overview
Manufacturer Ford Australia
Also called Ford XP Fairmont
Production February 1965 – September 1966
Body and chassis
Body style 4 door sedan
4-door station wagon
2-door hardtop
2-door coupe utility
2-door panel van
Layout Front engine, rear-wheel drive
Powertrain
Engine 144 ci (2.3L) Straight-6 OHV
170 ci (2.8L) Straight-6 OHV
200 ci (3.3 L) Straight-6 OHV
Transmission 3-speed manual
2-speed Ford-O-Matic automatic
3-speed automatic
Dimensions
Wheelbase 2781 mm
Length 4658 mm
Width 1781 mm
Height 1420 mm
Curb weight 1175 kg
Chronology
Predecessor Ford XM Falcon
Successor Ford XR Falcon

The Ford Falcon (XP) is a mid-sized car produced by Ford Australia from 1965 to 1966. It was the fourth and last iteration of the first generation of this Australian-made model, and also included the Ford Fairmont (XP), the luxury-oriented version of the Falcon.

Introduction

The XP Falcon was introduced in March 1965,[1] replacing the XM Falcon which had been in production since 1964. It was the final series of the first-generation Falcon which had been introduced as the XK Falcon in 1960. The main change from the XM was the 'torque box' steel subframe which added structural rigidity to the car. This was a key in improving the public perception of the car, as the early models were considered flimsy and were unpopular with Australian fleet buyers.

The running gear and most other components stayed the same from the XM through to the XP. All of the utility, sedan delivery, and taxi/police kit vehicles had five-lug 13-inch wheels and larger 10-inch drum brakes, as had all previous commercial models. Commercials had always had lower-ratio differentials (4.00:1) and larger 6.70 x 13 tyres. The high-end Fairmonts came with 14-inch four-lug wheels to accommodate the standard disc brakes on this model, whereas other models had 13-inch wheels if disc brakes were not optioned. Fairmonts featured bucket seats, the 200 ci Super Pursuit engine initially in four-main bearing form and finally with the imported seven-main bearing unit, three-speed automatic transmission, and a padded dash along with carpets, perforated, colour-matched headlining, blower heater, screen washers, chrome-plated interior mirror, seven interior door-operated lights, and a handbrake on warning light flasher as standard. Vacuum-assisted disc brakes were standard in the Fairmont only and optional on other sedan and hardtop models.

Model range

The XP Falcon passenger car range was initially offered in four-door sedan, two-door hardtop, and five-door station wagon body styles marketed as:

In September 1965, the Falcon Futura Sedan and Falcon Squire Station Wagon were replaced by two new Fairmont models [3] marketed as:

The XP Falcon commercial vehicles range was offered in two-door coupe utility and two-door panel van body styles marketed as:

Production and replacement

Production of the XP Falcon range totaled 70,998 vehicles [1] prior to its replacement by the XR Falcon in September 1966.[6]

References

  1. 1 2 AC Bushby, The Australian Falcon Collection, 1989, page 62
  2. 1 2 3 4 5 6 7 8 9 10 Ford XP Falcon sales brochures as reproduced in AC Bushby, The Australian Falcon Collection, 1989, pages 62–83
  3. Norm Darwin, The History of Ford in Australia, 1986, page 158
  4. 1 2 Ford XP Falcon Utility sales brochure Retrieved on 27 January 2011
  5. Ford XP Falcon Sedan Delivery sales brochure Retrieved on 27 January 2011
  6. AC Bushby, The Australian Falcon Collection, 1989, page 84
This article is issued from Wikipedia - version of the Thursday, January 14, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.