Finite strain theory

Continuum mechanics
Laws Conservations Energy Mass Momentum Inequalities Clausius–Duhem (entropy)
Solid mechanics Stress Deformation Compatibility Finite strain Infinitesimal strain Elasticity (linear) Plasticity Bending Hooke's law Material failure theory Fracture mechanics Contact mechanics (frictional)
Fluid mechanics Fluids Statics · Dynamics Archimedes' principle · Bernoulli's principle Navier–Stokes equations Poiseuille equation · Pascal's law Viscosity (Newtonian · non-Newtonian) Buoyancy · Mixing · Pressure Liquids Surface tension Capillary action Gases Atmosphere Boyle's law Charles's law Gay-Lussac's law Combined gas law Plasma
Rheology Viscoelasticity Rheometry Rheometer Smart fluids Magnetorheological Electrorheological Ferrofluids
Scientists Bernoulli Boyle Cauchy Charles Euler Gay-Lussac Hooke Pascal Newton Navier Stokes

In continuum mechanics, the finite strain theory—also called large strain theory, or large deformation theory—deals with deformations in which both rotations and strains are arbitrarily large, i.e. invalidates the assumptions inherent in infinitesimal strain theory. In this case, the undeformed and deformed configurations of the continuum are significantly different and a clear distinction has to be made between them. This is commonly the case with elastomers, plastically-deforming materials and other fluids and biological soft tissue.

Displacement

The displacement of a body has two components: a rigid-body displacement and a deformation.

• A rigid-body displacement consists of a simultaneous translation and rotation of the body without changing its shape or size.
• Deformation implies the change in shape and/or size of the body from an initial or undeformed configuration to a current or deformed configuration (Figure 1).

A change in the configuration of a continuum body can be described by a displacement field. A displacement field is a vector field of all displacement vectors for all particles in the body, which relates the deformed configuration with the undeformed configuration. Relative displacement between particles occurs if and only if deformation has occurred. If displacement occurs without deformation, then it is deemed a rigid-body displacement.

Material coordinates (Lagrangian description)

The displacement of particles indexed by variable i may be expressed as follows. The vector joining the positions of a particle in the undeformed configuration and deformed configuration is called the displacement vector. Using in place of and in place of , both of which are vectors from the origin of the coordinate system to each respective point, we have the Lagrangian description of the displacement vector:

Where is the unit vector that defines the basis of the spatial (lab-frame) coordinate system.

Expressed in terms of the material coordinates, the displacement field is:

The partial derivative of the displacement vector with respect to the material coordinates yields the material displacement gradient tensor . Thus we have,

where is the deformation gradient tensor.

Spatial coordinates (Eulerian description)

In the Eulerian description, the vector joining the positions of a particle in the undeformed configuration and deformed configuration is called the displacement vector:

Where is the unit vector that defines the basis of the material (body-frame) coordinate system.

Expressed in terms of spatial coordinates, the displacement field is:

The partial derivative of the displacement vector with respect to the spatial coordinates yields the spatial displacement gradient tensor . Thus we have,

Relationship between the material and spatial coordinate systems

are the direction cosines between the material and spatial coordinate systems with unit vectors and , respectively. Thus

The relationship between and is then given by

Knowing that

then

Combining the coordinate systems of deformed and undeformed configurations

It is common to superimpose the coordinate systems for the deformed and undeformed configurations, which results in , and the direction cosines become Kronecker deltas, i.e.

Thus in material (deformed) coordinates, the displacement may be expressed as:

And in spatial (undeformed) coordinates, the displacement may be expressed as:

Deformation gradient tensor

The deformation gradient tensor is related to both the reference and current configuration, as seen by the unit vectors and , therefore it is a two-point tensor.

Due to the assumption of continuity of , has the inverse , where is the spatial deformation gradient tensor. Then, by the implicit function theorem,^[1] the Jacobian determinant must be nonsingular, i.e.

The material deformation gradient tensor is a second-order tensor that represents the gradient of the mapping function or functional relation , which describes the motion of a continuum. The material deformation gradient tensor characterizes the local deformation at a material point with position vector , i.e. deformation at neighbouring points, by transforming (linear transformation) a material line element emanating from that point from the reference configuration to the current or deformed configuration, assuming continuity in the mapping function , i.e. differentiable function of and time , which implies that cracks and voids do not open or close during the deformation. Thus we have,

Relative displacement vector

Consider a particle or material point with position vector in the undeformed configuration (Figure 2). After a displacement of the body, the new position of the particle indicated by in the new configuration is given by the vector position . The coordinate systems for the undeformed and deformed configuration can be superimposed for convenience.

Consider now a material point neighboring , with position vector . In the deformed configuration this particle has a new position given by the position vector . Assuming that the line segments and joining the particles and in both the undeformed and deformed configuration, respectively, to be very small, then we can express them as and . Thus from Figure 2 we have

where is the relative displacement vector, which represents the relative displacement of with respect to in the deformed configuration.

Taylor approximation

For an infinitesimal element , and assuming continuity on the displacement field, it is possible to use a Taylor series expansion around point , neglecting higher-order terms, to approximate the components of the relative displacement vector for the neighboring particle as

Thus, the previous equation can be written as

Time-derivative of the deformation gradient

Calculations that involve the time-dependent deformation of a body often require a time derivative of the deformation gradient to be calculated. A geometrically consistent definition of such a derivative requires an excursion into differential geometry^[2] but we avoid those issues in this article.

The time derivative of is

where is the velocity. The derivative on the right hand side represents a material velocity gradient. It is common to convert that into a spatial gradient, i.e.,

where is the spatial velocity gradient. If the spatial velocity gradient is constant, the above equation can be solved exactly to give

assuming at . There are several methods of computing the exponential above.

Related quantities often used in continuum mechanics are the rate of deformation tensor and the spin tensor defined, respectively, as:

The rate of deformation tensor gives the rate of stretching of line elements while the spin tensor indicates the rate of rotation or vorticity of the motion.

Transformation of a surface and volume element

To transform quantities that are defined with respect to areas in a deformed configuration to those relative to areas in a reference configuration, and vice versa, we use Nanson's relation, expressed as

where is an area of a region in the deformed configuration, is the same area in the reference configuration, and is the outward normal to the area element in the current configuration while is the outward normal in the reference configuration, is the deformation gradient, and .

The corresponding formula for the transformation of the volume element is

Derivation of Nanson's relation (see also [3])
To see how this formula is derived, we start with the oriented area elements in the reference and current configurations: The reference and current volumes of an element are where . Therefore, or, so, So we get or,

Polar decomposition of the deformation gradient tensor

The deformation gradient , like any second-order tensor, can be decomposed, using the polar decomposition theorem, into a product of two second-order tensors (Truesdell and Noll, 1965): an orthogonal tensor and a positive definite symmetric tensor, i.e.

where the tensor is a proper orthogonal tensor, i.e. and , representing a rotation; the tensor is the right stretch tensor; and the left stretch tensor. The terms right and left means that they are to the right and left of the rotation tensor , respectively. and are both positive definite, i.e. and , and symmetric tensors, i.e. and , of second order.

This decomposition implies that the deformation of a line element in the undeformed configuration onto in the deformed configuration, i.e. , may be obtained either by first stretching the element by , i.e. , followed by a rotation , i.e. ; or equivalently, by applying a rigid rotation first, i.e. , followed later by a stretching , i.e. (See Figure 3).

Due to the orthogonality of

so that and have the same eigenvalues or principal stretches, but different eigenvectors or principal directions and , respectively. The principal directions are related by

This polar decomposition is unique as is non-symmetric.

Deformation tensors

Several rotation-independent deformation tensors are used in mechanics. In solid mechanics, the most popular of these are the right and left Cauchy–Green deformation tensors.

Since a pure rotation should not induce any stresses in a deformable body, it is often convenient to use rotation-independent measures of deformation in continuum mechanics. As a rotation followed by its inverse rotation leads to no change () we can exclude the rotation by multiplying by its transpose.

The right Cauchy–Green deformation tensor

In 1839, George Green introduced a deformation tensor known as the right Cauchy–Green deformation tensor or Green's deformation tensor, defined as:^[4][5]

Physically, the Cauchy–Green tensor gives us the square of local change in distances due to deformation, i.e.

Invariants of are often used in the expressions for strain energy density functions. The most commonly used invariants are

where are stretch ratios for the unit fibers that are initially oriented along the directions of three axis in the coordinate systems.

The Finger deformation tensor

The IUPAC recommends^[5] that the inverse of the right Cauchy–Green deformation tensor (called the Cauchy tensor in that document), i. e., , be called the Finger tensor. However, that nomenclature is not universally accepted in applied mechanics.

The left Cauchy–Green or finger deformation tensor

Reversing the order of multiplication in the formula for the right Green–Cauchy deformation tensor leads to the left Cauchy–Green deformation tensor which is defined as:

The left Cauchy–Green deformation tensor is often called the Finger deformation tensor, named after Josef Finger (1894).^[5][6][7]

Invariants of are also used in the expressions for strain energy density functions. The conventional invariants are defined as

where is the determinant of the deformation gradient.

For nearly incompressible materials, a slightly different set of invariants is used:

The Cauchy deformation tensor

Earlier in 1828,^[8] Augustin Louis Cauchy introduced a deformation tensor defined as the inverse of the left Cauchy–Green deformation tensor, . This tensor has also been called the Piola tensor^[5] and the Finger tensor^[9] in the rheology and fluid dynamics literature.

Spectral representation

If there are three distinct principal stretches , the spectral decompositions of and is given by

Furthermore,

Observe that

Therefore the uniqueness of the spectral decomposition also implies that . The left stretch () is also called the spatial stretch tensor while the right stretch () is called the material stretch tensor.

The effect of acting on is to stretch the vector by and to rotate it to the new orientation , i.e.,

In a similar vein,

Examples
Uniaxial extension of an incompressible material This is the case where a specimen is stretched in 1-direction with a stretch ratio of . If the volume remains constant, the contraction in the other two directions is such that or . Then: Simple shear Rigid body rotation

Derivatives of stretch

Derivatives of the stretch with respect to the right Cauchy–Green deformation tensor are used to derive the stress-strain relations of many solids, particularly hyperelastic materials. These derivatives are

and follow from the observations that

Physical interpretation of deformation tensors

Let be a Cartesian coordinate system defined on the undeformed body and let be another system defined on the deformed body. Let a curve in the undeformed body be parametrized using . Its image in the deformed body is .

The undeformed length of the curve is given by

After deformation, the length becomes

Note that the right Cauchy–Green deformation tensor is defined as

Hence,

which indicates that changes in length are characterized by .

Finite strain tensors

The concept of strain is used to evaluate how much a given displacement differs locally from a rigid body displacement.^[1][10] One of such strains for large deformations is the Lagrangian finite strain tensor, also called the Green-Lagrangian strain tensor or Green – St-Venant strain tensor, defined as

or as a function of the displacement gradient tensor

or

The Green-Lagrangian strain tensor is a measure of how much differs from .

The Eulerian-Almansi finite strain tensor, referenced to the deformed configuration, i.e. Eulerian description, is defined as

or as a function of the displacement gradients we have

Derivation of the Lagrangian and Eulerian finite strain tensors

A measure of deformation is the difference between the squares of the differential line element , in the undeformed configuration, and , in the deformed configuration (Figure 2). Deformation has occurred if the difference is non zero, otherwise a rigid-body displacement has occurred. Thus we have, In the Lagrangian description, using the material coordinates as the frame of reference, the linear transformation between the differential lines is Then we have, where are the components of the right Cauchy–Green deformation tensor, . Then, replacing this equation into the first equation we have, or where , are the components of a second-order tensor called the Green – St-Venant strain tensor or the Lagrangian finite strain tensor, In the Eulerian description, using the spatial coordinates as the frame of reference, the linear transformation between the differential lines is where are the components of the spatial deformation gradient tensor, . Thus we have where the second order tensor is called Cauchy's deformation tensor, . Then we have, or where , are the components of a second-order tensor called the Eulerian-Almansi finite strain tensor, Both the Lagrangian and Eulerian finite strain tensors can be conveniently expressed in terms of the displacement gradient tensor. For the Lagrangian strain tensor, first we differentiate the displacement vector with respect to the material coordinates to obtain the material displacement gradient tensor, Replacing this equation into the expression for the Lagrangian finite strain tensor we have or Similarly, the Eulerian-Almansi finite strain tensor can be expressed as

Seth–Hill family of generalized strain tensors

B. R. Seth from the Indian Institute of Technology, Kharagpur was the first to show that the Green and Almansi strain tensors are special cases of a more general strain measure.^[11][12] The idea was further expanded upon by Rodney Hill in 1968.^[13] The Seth–Hill family of strain measures (also called Doyle-Ericksen tensors)^[14] can be expressed as

For different values of we have:

The second-order approximation of these tensors is

where is the infinitesimal strain tensor.

Many other different definitions of tensors are admissible, provided that they all satisfy the conditions that:^[15]

• vanishes for all rigid-body motions
• the dependence of on the displacement gradient tensor is continuous, continuously differentiable and monotonic
• it is also desired that reduces to the infinitesimal strain tensor as the norm

An example is the set of tensors

which do not belong to the Seth–Hill class, but have the same 2nd-order approximation as the Seth–Hill measures at for any value of .^[16]

Stretch ratio

The stretch ratio is a measure of the extensional or normal strain of a differential line element, which can be defined at either the undeformed configuration or the deformed configuration.

The stretch ratio for the differential element (Figure) in the direction of the unit vector at the material point , in the undeformed configuration, is defined as

where is the deformed magnitude of the differential element .

Similarly, the stretch ratio for the differential element (Figure), in the direction of the unit vector at the material point , in the deformed configuration, is defined as

The normal strain in any direction can be expressed as a function of the stretch ratio,

This equation implies that the normal strain is zero, i.e. no deformation, when the stretch is equal to unity. Some materials, such as elastometers can sustain stretch ratios of 3 or 4 before they fail, whereas traditional engineering materials, such as concrete or steel, fail at much lower stretch ratios, perhaps of the order of 1.001 (reference?)

Physical interpretation of the finite strain tensor

The diagonal components of the Lagrangian finite strain tensor are related to the normal strain, e.g.

where is the normal strain or engineering strain in the direction .

The off-diagonal components of the Lagrangian finite strain tensor are related to shear strain, e.g.

where is the change in the angle between two line elements that were originally perpendicular with directions and , respectively.

Under certain circumstances, i.e. small displacements and small displacement rates, the components of the Lagrangian finite strain tensor may be approximated by the components of the infinitesimal strain tensor

Derivation of the physical interpretation of the Lagrangian and Eulerian finite strain tensors

The stretch ratio for the differential element (Figure) in the direction of the unit vector at the material point , in the undeformed configuration, is defined as where is the deformed magnitude of the differential element . Similarly, the stretch ratio for the differential element (Figure), in the direction of the unit vector at the material point , in the deformed configuration, is defined as The square of the stretch ratio is defined as Knowing that we have where and are unit vectors. The normal strain or engineering strain in any direction can be expressed as a function of the stretch ratio, Thus, the normal strain in the direction at the material point may be expressed in terms of the stretch ratio as solving for we have The shear strain, or change in angle between two line elements and initially perpendicular, and oriented in the principal directions and , respectivelly, can also be expressed as a function of the stretch ratio. From the dot product between the deformed lines and we have where is the angle between the lines and in the deformed configuration. Defining as the shear strain or reduction in the angle between two line elements that were originally perpendicular, we have thus, then or

Deformation tensors in curvilinear coordinates

A representation of deformation tensors in curvilinear coordinates is useful for many problems in continuum mechanics such as nonlinear shell theories and large plastic deformations. Let be a given deformation where the space is characterized by the coordinates . The tangent vector to the coordinate curve at is given by

The three tangent vectors at form a basis. These vectors are related the reciprocal basis vectors by

Let us define a second-order tensor field (also called the metric tensor) with components

The Christoffel symbols of the first kind can be expressed as

To see how the Christoffel symbols are related to the Right Cauchy–Green deformation tensor let us define two sets of bases

The deformation gradient in curvilinear coordinates

Using the definition of the gradient of a vector field in curvilinear coordinates, the deformation gradient can be written as

The right Cauchy–Green tensor in curvilinear coordinates

The right Cauchy–Green deformation tensor is given by

If we express in terms of components with respect to the basis {} we have

Therefore

and the Christoffel symbol of the first kind may be written in the following form.

Some relations between deformation measures and Christoffel symbols

Let us consider a one-to-one mapping from to and let us assume that there exist two positive definite, symmetric second-order tensor fields and that satisfy

Then,

Noting that

and we have

Define

Hence

Define

Then

Define the Christoffel symbols of the second kind as

Then

Therefore

The invertibility of the mapping implies that

We can also formulate a similar result in terms of derivatives with respect to . Therefore

Compatibility conditions

The problem of compatibility in continuum mechanics involves the determination of allowable single-valued continuous fields on bodies. These allowable conditions leave the body without unphysical gaps or overlaps after a deformation. Most such conditions apply to simply-connected bodies. Additional conditions are required for the internal boundaries of multiply connected bodies.

Compatibility of the deformation gradient

The necessary and sufficient conditions for the existence of a compatible field over a simply connected body are

Compatibility of the right Cauchy–Green deformation tensor

The necessary and sufficient conditions for the existence of a compatible field over a simply connected body are

We can show these are the mixed components of the Riemann–Christoffel curvature tensor. Therefore the necessary conditions for -compatibility are that the Riemann–Christoffel curvature of the deformation is zero.

Compatibility of the left Cauchy–Green deformation tensor

No general sufficiency conditions are known for the left Cauchy–Green deformation tensor in three-dimensions. Compatibility conditions for two-dimensional fields have been found by Janet Blume.^[17][18]

See also

• Infinitesimal strain
• Compatibility (mechanics)
• Curvilinear coordinates
• Piola–Kirchhoff stress tensor, the stress tensor for finite deformations.
• Stress measures
• Strain partitioning

References

Further reading

• Dill, Ellis Harold (2006). Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity. Germany: CRC Press. ISBN 0-8493-9779-0. 

• Dimitrienko, Yuriy (2011). Nonlinear Continuum Mechanics and Large Inelastic Deformations. Germany: Springer. ISBN 978-94-007-0033-8. 

• Hutter, Kolumban; Klaus Jöhnk (2004). Continuum Methods of Physical Modeling. Germany: Springer. ISBN 3-540-20619-1. 

• Lubarda, Vlado A. (2001). Elastoplasticity Theory. CRC Press. ISBN 0-8493-1138-1. 

• Macosko, C. W. (1994). Rheology: principles, measurement and applications. VCH Publishers. ISBN 1-56081-579-5. 

• Mase, George E. (1970). Continuum Mechanics. McGraw-Hill Professional. ISBN 0-07-040663-4. 

• Mase, G. Thomas; George E. Mase (1999). Continuum Mechanics for Engineers (Second ed.). CRC Press. ISBN 0-8493-1855-6. 

• Nemat-Nasser, Sia (2006). Plasticity: A Treatise on Finite Deformation of Heterogeneous Inelastic Materials. Cambridge: Cambridge University Press. ISBN 0-521-83979-3. 

• Rees, David (2006). Basic Engineering Plasticity – An Introduction with Engineering and Manufacturing Applications. Butterworth-Heinemann. ISBN 0-7506-8025-3. 

External links

• Prof. Amit Acharya's notes on compatibility on iMechanica
• Deformations and Strain Chapter on www.continuummechanics.org