Fiat 100 series engine

Fiat 100 engine

Fiat 100GL.000 engine in a Fiat Cinquecento
Overview
Manufacturer Fiat
Production 1955–2000
Combustion chamber
Configuration OHV 2-valve inline-four
Displacement 633–1,050 cc
Cylinder block alloy cast iron
Cylinder head alloy aluminium

Designed by Dante Giacosa, the Fiat 100 engine first appeared in a 633 cc form in the all-new Fiat 600 in 1955. The in-line four-cylinder engine comprised an iron block and an aluminium cylinder head with pushrod actuated valves. The engine was produced at Fiat's Mirafiori (Turin) plant, and then at Bielsko-Biała, and remained in production until 2000, used in Fiat Panda and Fiat Seicento in his last 899 cc capacity version fitted with SPI fuel injection and hydraulic tappets, although it was being phased out since 1985 in favour of the new Fiat FIRE engine.

Engine specifications

The 100-series engine has a three main bearing crankshaft, a cast iron block and an aluminium cylinder head with an integrated intake manifold. The camshaft was placed in the block and was chain-driven. There were 2 overhead valves per cylinder, actuated by an OHV valvetrain. The first versions were fed by a carburettor, but single point fuel injection with catalyst would appear in the early '90s to fulfill anti-pollution laws, along with distributorless electronic ignition.

List of 100 series engines

Applications

List of vehicles utilising variations of the Fiat 100-series engine.

Wikimedia Commons has media related to Fiat 100 engine.
This article is issued from Wikipedia - version of the Friday, February 12, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.