Ferrari GT4

Ferrari 308/208 GT4
Overview
Manufacturer	Ferrari
Also called	Dino 308/208 GT4 2+2
Production	1973–1980 (208 from 1975)
Designer	Marcello Gandini at Bertone[1]
Body and chassis
Class	Sports car
Body style	2+2 coupé
Layout	Transverse rear mid-engine, rear-wheel-drive
Related	208/308 GTB and GTS
Powertrain
Engine	3.0 L Dino V8 (308 GT4) 2.0 L Dino V8 (208 GT4)
Transmission	5-speed manual
Dimensions
Wheelbase	2,550 mm (100.4 in)
Length	4,300 mm (169.3 in)[2] or 4,488 mm (176.7 in) (U.S.)
Width	1,800 mm (70.9 in)
Height	1,180 mm (46.5 in)
Kerb weight	1,150 kg (2,535 lb) (empty weight)
Chronology
Successor	Ferrari Mondial

The Dino 308 GT4 and 208 GT4 (later Ferrari 308 GT4 and 208 GT4) were mid-engined V8 2+2 cars built by Ferrari. The Dino 308 GT4 was introduced in 1973 and supplemented by the 208 GT4 in 1975. The cars were sold with Dino badging (continuing the Dino brand to differentiate non-V12 Ferrari) until May 1976, when they received Ferrari badging. The GT4 was replaced by the Mondial 8 in 1980 after a production run of 2,826 308s and 840 208s.

Design

308 GT4 in London

The GT4 was a groundbreaking model for Ferrari in several ways: it was the first production Ferrari to feature the mid-engined V8 layout that would become the bulk of the company's business in the succeeding decades, and was the first production Ferrari with Bertone (rather than Pininfarina) designed bodywork. Pininfarina was upset by the decision to give cross-town rival Bertone the design, considering all they had done for Ferrari. The styling featured angular lines entirely different from its curvaceous 2-seater brother, the Dino 246, and was controversial at the time. Some journalists compared it to the Bertone-designed Lancia Stratos and Lamborghini Urraco, also penned by Marcello Gandini. From the cockpit the driver sees only the road. It has perfect 360 degree visibility, no blind spots, upright and comfortable seating position, a real trunk, a back seat for soft luggage, and very easy engine access. Enzo Ferrari himself took a major role in its design, even having a mock-up made where he could sit in the car to test different steering, pedals and cockpit seating positioning.^[3]

Specifications

US-specification engine in a 1975 Dino 308 GT4.

The chassis was a tubular spaceframe based on the Dino 246, but was stretched for a 2,926.90 mm (115.2 in)^[2] wheelbase to make room for the second row of seats. The suspension was fully independent, with double wishbones, anti-roll bars, coaxial telescopic shock absorbers and coil springs on both axles. Niki Lauda helped set up the chassis.^[3]

The 3.0 L (2927 cc) V8 was mounted transversally integrally joined with the 5-speed transaxle gearbox. The engine had an aluminium alloy block and heads, 16-valves and dual overhead camshafts driven by toothed belts; it produced 255 hp (190 kW) in the European version and 240 hp (179 kW) in the American. The induction system used four Weber 40 DCNF carburetors.

308 GT4

The Dino 308 GT4 was introduced at the Paris Motor Show in November 1973. The 308 GT4 finally gained the "Prancing Horse" badge in May 1976, which replaced the Dino badges on the hood, wheels, rear panel and the steering wheel. This has caused major confusion over the years by owners, enthusiasts and judges. During the energy crisis at that time many prospective owners were hesitant to buy such an expensive automobile not badged "Ferrari" being confused at the significance of the Dino name. Dino was Enzo Ferrari's beloved son who passed tragically in 1956 and his name was considered to honor his memory on the models it was placed.

1975 Dino 308 GT4 (US version)

In an effort to improve sales until the 1976 official re-badging, Ferrari sent out factory update #265/1 on July 1, 1975 with technical and cosmetic revisions in many areas. Some of these revisions were implemented piecemeal by dealers. Some made all the revisions while some just made a few. This leaves many 1975 GT4's with a variety of modifications which are hard to document as "correct" to aficionados who may not understand the complicated series of events surrounding this model year. Some of the revisions included adding Prancing Horse badges, repainting in the Boxer two-tone scheme (lower half painted matte black), air conditioning fixes, etc. It also included bumper modification and exhaust changes for North American versions. It should be noted that the Dino 308 GT4 was the only Ferrari legally imported to the US in 1975, and it was also the year Niki Lauda won the Formula One drivers championship and Ferrari won the constructors title. The GT4 was the only 2+2 Ferrari ever raced with factory support.

There were two series of GT4; the earlier cars featured a twin distributor engine and foglamps mounted in the front valance. Later cars had a single distributor engine, with foglamps mounted behind the front grille.

208 GT4

Ferrari/Dino 208 GT4

Introduced at the Geneva Motor Show in 1975, the 208 GT4 was a low-displacement version of the V8 produced for the Italian market, where cars with engines larger than two litres were subjected to a doubled VAT (38%). The engine was de-bored to (66.8x71 mm) 2.0 L (1991 cc) V8, resulting in the smallest production V8 in history for a road car.

Power output was 170 hp (127 kW) at 7,700 rpm for a top speed of 137 mph (220 km/h). Smaller Weber 34 DCNF carburetors, a lower final drive ratio and skinnier tires completed the technical changes for the 208. Chrome (rather than black) accents outside and the lack of fog lights were external visual indicators of the smaller-engined GT4. Inside the 208 GT4 featured a black rather than silver dash facing.

The 208 GTB replaced the 208 GT4 in 1980, after only 840 cars built.

References

Wikimedia Commons has media related to Dino GT4.

Notes

Bibliography