Fender HM Strat

Fender HM Strat

A 1990 USA HM strat in its original hard case.
Manufacturer Fender
Period 1988–1992
Construction
Body type Solid, double cut
Neck joint Bolt-on (set-in neck on certain models)
Scale 25.5 in (650 mm) (24.75 in or 629 mm on some models)
Woods
Body Alder, ash, poplar (limited edition guitars available in a variety of woods including basswood, mahogany and koa (none of which is plywood) with flamed, spalted or quilted maple tops and black, cream or ivory body and neck binding)
Neck Maple
Fretboard Maple, rosewood, pau ferro, ebony (many models usually have 21 vintage frets, white or black dots and 7.25 in (184 mm) radius; higher-end contemporary versions had 22 jumbo frets, abalone dot inlays and 9.5" radius)
Hardware
Bridge Synchronized tremolo (some models came with a hardtail bridge or a Floyd Rose locking tremolo)
Pickup(s)

3 or 2 single-coils, with the latter having a hot humbucker in the bridge position,[1] with the exception of the Acoustasonic Strat and Stratacoustic models, the only acoustic Stratocasters.[1] Most Stratocasters generally came with a pickguard; on certain high-end versions, the pickguard is absent. There are also select models that come with active electronics and HSH, HHH, HH or H pickup configurations.

Humbucker-equipped Strats are often referred to as "Fat Strats", in reference to the fact that humbucking pickups usually tend to have more bass in the output signal than single coils, thus making the sound "fatter".
Colors available
Brown Sunburst, Black, Arctic White, Lake Placid Blue, Candy Apple Red, Midnight Wine, Copper Metallic Sunburst

The Fender HM Strat was an electric guitar produced by Fender Musical Instruments from 1988 until 1992 (although some sources say production started as early as 1986). A relatively radical departure from Leo Fender's classic Stratocaster design, it was Fender's answer to Superstrats produced by manufacturers such as Ibanez and Jackson Guitars.

History

The Fender HM (Heavy metal) strat was originally produced in Japan and subsequently, in 1990, in the United States. Some evidence indicates that assembly in the U.S. with some components imported from Japan may have begun as early as 1987. The first version appeared with a distinct Strat logo in the headstock, 24 medium jumbo frets (i.e. these are thicker and wider frets), a maple neck with rosewood or maple fingerboard and with one of the four neck "bolts" (screws) off-set at the bottom of the neck to allow a more comfortable "heel" area for playing in the upper registers, a lighter basswood body, or occasionally alder for US made guitars). The scale length is an even 25 inches (635 mm), rather than the normal 25.5 inches (648 mm) commonly used on Stratocaster and Telecaster guitars.

In addition the Fender HM Strat had a Kahler licensed double-locking tremolo system,[2] "Spyder", and Gotoh[3] tuners, one DiMarzio[4] humbucking H* "Super 3" pickup ("H" configuration), and sometimes two single coil pickups (S*, HSS configuration), two humbuckers, or sometimes a single additional Super Distortion, (HH configuration) and a side mounted jack socket. Japanese-assembled guitars have colored polyester on the bodies, and clear polyester on the necks. American-assembled HM Strats have a very hard aircraft grade urethane color and clear coats on the body, while still using polyester finish on the neck. Kahler USA offers a detailed schematic diagram of the Kahler Spyder tremolo[5] and several (but not all) replacement parts are available.

When Fender Musical Instruments was sold to a group of investors in the mid-1980s, the building that contained the equipment was not part of the sale, so the plant was re-located. During this period, when there was little to no production of instruments in the U.S., Fender imported instruments made by Fender Japan, many of which were the "Contemporary" Stratocasters and Telecasters. These were sold in the U.S., along with "vintage" spec models, from 1985 on up almost through the end of the HM Strat era. Thus, it is not unusual that a Fender HM strat may have Japanese-made components (e.g. neck) assembled in the US.

The US HM series stratocasters were produced about three years after the Fender Contemporary Stratocaster Japan series in 1990 (possibly late 1988 with Japanese sourced components) and included the Strat 10-3200 (i.e. cont. strat, HSS), 10-2100 (HSS), 10-2102 (HSS), 10-2200 (1 [6] 10-2300 (HH) and 10-2400 (H) models. All HM strat US made models had a scale length of 25.15 inches (639 mm) and a radius of 17 inches (431.8 mm). The Contemporary Stratocaster was eventually supplanted by the HM Strat in ’88, which went through subsequent versions. The first U.S. Fender Superstrat was the adaptation of the Japanese HM Strat, plus the addition of the U.S. Contemporary Stratocaster, in ’89. Later on (~1990), Fender introduced the USA HM Strat Ultra that is considered by many to be superior to the previous HM versions. Fender HM strat ultra differs in that it has 4 Lace Sensor pickups in HSS configuration (these pickups are considered less noisy/aggressive and sometimes less preferred for HM strat than those found in the Fender HM Strat), a smaller 'digitalized' Strat logo (considered to be a more discrete) and an ebony fingerboard with split-triangle inlays. The Fender logo on the headstock is mother of pearl.

The Superstrat fashion of the ’80s is a fascinating period in guitar history that is yet not fully appreciated. In 1985, a group of musically dedicated people and investors led by [7] purchased the Fender company from Columbia Broadcasting System (CBS). Several new models including that of the Fender HM Strat were produced. The Fender HM strat was endorsed by many guitar players including the guitarist Greg Howe. However, this model was also opposed by Fender purists as its features were "off the Fender's beaten track". The use of a humbucker (instead of a single coil), 24 jumbo frets (instead of 21 or 22 regular frets) and occasionally basswood (instead of the typical alder or ash) as well as the overall appearance were not particularly welcomed by most conservative Fender fans. Today, a well-maintained Fender HM strat becomes an increasingly rare to find instrument. As with most discontinued instruments,however, this guitar is also hard to maintain. For instance, although Kahler USA provides product support for the Kahler Spyder tremolo parts, various other components of this guitar are currently unavailable (e.g. knobs).

In recent years guitarist Ethan Brosh has been spotted playing old 80's HM Strats as his touring instrument of choice.

References

  1. 1 2 Stratocaster, Fender.com. Retrieved August 2011
  2. ↑
  3. ↑
  4. ↑
  5. ↑
  6. ↑ silver sensor, H
  7. ↑ William Schultz

External links

Wikimedia Commons has media related to Fender HM Strat.
This article is issued from Wikipedia - version of the Saturday, February 13, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.