Fence (woodworking)

A fence is a straight edge that is placed parallel to the direction of the cut saw blade. It is rigidly connected to the saw or table. The distance between the surface of the fence and the closest edge of the saw blade dictates the specified width of the cut. Material that is being cut is held tight against the fence in order to ensure that it is cut to the specified width.^[1]

References

↑ "Laminate-cutting auxiliary fence". Woodmagazine.com. Retrieved 2010-03-08.

Woodworking

Overviews

Forms

Woods

Soft	Cedar (Calocedrus, Cedrus) Cypress Douglas fir Fir Juniper Larch Pine Spruce Yew

Hard	Ash Alder Aspen Balsa Beech Birch Cherry Chestnut Ebony Elm Hazel Lignum vitae Linden (lime, basswood) Mahogany Maple Oak Padauk Plum Poplar Teak Totara Walnut Willow

Tools

Abrasives Axe Adze Chisel Clamp Drawknife Drill Float Mallet Milling machine Mitre box Moulding plane Plane Rasp Router Sandpaper Spokeshave Timber-framing Vise Winding sticks Wood scribe Workbench

Saws	Backsaw Bandsaw Bow Bucksaw Chainsaw Circular Compass Coping Crosscut Frame Fretsaw Jigsaw Keyhole Miter Rip Scroll Veneer Whipsaw

Geometry

Joints	Birdsmouth Bridle Butt Butterfly Coping Crown of thorns Dados Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's mitre Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove

Profiles	Bead Bevel Chamfer Molding Ogee Ogive

Treatments

Organizations

Conversion

Techniques

Category
WikiProject
Commons

This article is issued from Wikipedia - version of the Monday, December 16, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Fence (woodworking)

See also

References