FS Class ALe 582

ALe 582
ALe 582 in current livery at Bologna Centrale station.
Manufacturer	Mechanical part: Breda, Fiore, Stanga Electrical part: Marelli, Ansaldo, Firema
Number built	90
Operator(s)	Trenitalia
Specifications
Wheel diameter	860 mm (34 in)
Maximum speed	140 km/h (87 mph)
Transmission	30/75
Power supply	Electric
Electric system(s)	3000 V DC
Current collection method	Pantograph
AAR wheel arrangement	Bo'Bo
Bogies	2,560 mm (101 in)
Track gauge	1,435 mm (4 ft 8 ¹⁄₂ in) standard gauge

FS Class ALe 582 is an Italian Electric multiple unit which is suitible for Commuter and medium-distance rail lines, with power output at 3000 V DC, which collects power from a pantograph.

History

ALe 582 in original livery

ALe 582 in Trenord livery (the FNM version)

The project ALe 582-763 Le-Le-Le 884 562 was developed in the mid-eighties in order to replace old rolling stock used for commuter traffic and average distance of the secondary lines of Sicily and southern Italy.

Conceptually, it is an evolution of the previous project of the FS Class ALe 724 of which is the version with increased interior comfort with performance very similar and with which it is coupled to multiple command. The order of the first batch was made in mid-1984 and deliveries began in 1987 Six specimens were also purchased by the Ferrovie Nord Milano, who received them over in 1993, classified in Group E 750.

The contracts for the construction have been entrusted with regard to the mechanical part and the carriage at the Breda Costruzioni Ferroviarie di Pistoia, Officine Fiore di Caserta, Officine Meccaniche Stanga and for the electrical part to Ercole Marelli, Ansaldo Transporti, Firema Trasporti.

The livery that was adopted was of trains and rolling stock MDVE to medium distances, with sidebands in Grey Orange and Red. Since the mid-nineties for these carriages has been gradually adopted the livery XMPR unified.

The trains are usually made with a tractor Ale 582, one or two towed at intermediate Le 763 and Le 884 and a tow pilot Le 562; or with a tractor and a towed pilot; the traction system is full chopper closely similar to that used for the ETR 450.

In 2014, 6 ALe 582 (in FNM version) were delivered to the Valtellina Railway (between Lecco and Tirano via Sondrio) and the trains are named as:

Stelvio
Gavia
Forcola
Maloja
Spluga

The interiors where redone and revisioned.

Descriptions

Interior of an unrifurbished ALe 582

For the Milan suburban railway service, slightly modified vehicles named as FNM Class E.750 (second series: the first series are the ALe 724 version and the third series are the 642) version) were put onto service.

One of the most striking changes compared to ALe 724 is the front part is made according to the new specifications for safety reasons and polyester reinforced with fiberglass for easy installation and reduced maintenance. The interiors include two separate rooms, 1st class with three rows of seats very comfortable and form larger and 2nd class with four rows of seats for trucks, which are devoid of retreat situated on the other hand, towed, only 2nd class.

The electrical part, very similar to that of ETR 450, provides for two motors for each bogie, suspended elastically by the nose resting on the one hand and on the other on an axis concentric to the wheel axis corresponding cable; the engine transmits the motion to the latter by coupling gear, with gear ratio 30/75; in turn the axis cable transmits the motion to the wheel axis by means of the interposition of rubber blocks. The motors are permanently connected in series two by two. The possible combinations are then two, four motors in series for starting and driving at low speed or two branches in parallel for each of the two motors driving fast. The power control of the engine is made entirely by electronic means through Chopper controlled by fixed frequency modulators. In case of failure of a modulator is possible to continue driving with the exclusion of the same. The socket from the airline through two pantographs of the unified type FS 52. The devices are placed in a high voltage cabin located behind the cab front.

The brake is electric combined. The action is automatic braking intervenes at high speeds or power dissipation recovery, while low speed is added to the air with strains of electromotive wheels and disc brakes on towed.

Lines run by region

The ALe 582 runs railway lines in regions:

Sicily
Lombardy
Campania
Tuscany (occasionally: other times ALe 642)
Emilia Romagna (occasionally: other times ALe 642)
Abruzzo

Commuter rail lines

ALe 582 operates on:

Milan suburban railway service
Naples metropolitan railway service (Line 2)
Bologna metropolitan railway service (occasionally: other times ALe 642)

References

Cervigni, Vittorio (June 1987). "Elettromotrici ALe 582". I Treni Oggi (72): 14–18.
Elettromotrici ALe 582. FS.

External links

Media related to FS ALe 582 at Wikimedia Commons

Classes of Ferrovie dello Stato railcars and multiple units

Electric 650 V DC - Third rail	E.10^I E.10^II E.15 E.20 E.60

Electric 650 V DC	AC 1–4

Electric 800 V DC	MACD 700

Electric 800 V DC - Narrow gauge	41/S 42/S

Electric 3,6 kV AC Three-Phase	E.1 E.2

Electric 3 kV DC	E.623 E.624 ALe 184 ALe 400 ALe 402 ETR 425 ALe 426/506 ALe 501/502 ALe 540/660 ETR 563/564 ALe 582 ALe 601 ALe 642 ALe 644/804 ALe 710/711 ALe 724 ALe 790/880 ALe 792/882 ALe 801/940 ALe 803 ALe 840 ALe 841 ALe 883

Electric 3 kV DC high-speed	ETR 200 ETR 220 ETR 230 ETR 240 ETR 250 ETR 300 ETR 401 ETR 450 ETR 460 ETR 463 ETR 470 ETR 480 ETR 485 ETR 500 ETR 600 ETR 610 ETS 11

Electric high-speed multisystem	Frecciarossa 1000

Diesel	ATR 220 ATR 365/465 ALn 501/502 ALn 663 ALn 668 ALn 772 ALn 773 ALn 873 ALn 880 ALn 990

See also Category:Rolling stock of Italy

This article is issued from Wikipedia - version of the Tuesday, January 12, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.