FS Class 650

SFAI 1181-1200
RM Class 3000
FS Class 650

FS locomotive 6502, later 650.002
Type and origin
Power type Steam
Builder
Build date 1884–1896
Total produced 55
Specifications
Configuration 4-6-0
UIC class 2′C n2
Gauge 1,435 mm (4 ft 8 12 in)
Leading dia 840 mm (33.07 in)
Driver diameter 1,675 mm (65.94 in)
Length 10,280 mm (33 ft 8 34 in)
Axle load 14.2 tonnes (14.0 long tons; 15.7 short tons)
Loco weight 54.1 tonnes (53.2 long tons; 59.6 short tons)
Tender weight 29.9 tonnes (29.4 long tons; 33.0 short tons)
Fuel type Coal
Fuel capacity 3,500 kg (7,700 lb)
Water cap 10,000 litres (2,200 imp gal; 2,600 US gal)
Firebox:
  Firegrate area
2.34 m2 (25.2 sq ft)
Boiler pressure 10 kg/cm2 (981 kPa; 142 psi)
Heating surface 125.4 square metres (1,350 sq ft)
Cylinders Two, outside
Cylinder size 475 mm × 620 mm (18.70 in × 24.41 in)
Valve gear Gooch
Performance figures
Maximum speed 80 km/h (50 mph)
Power output 630 CV (463 kW; 621 hp)
Tractive effort 6,250 kgf (61.3 kN; 13,800 lbf)

The Ferrovie dello Stato Italiane (FS; Italian State Railways) Class 650 (Italian: Gruppo 650), formerly SFAI 1181-1200 and Rete Mediterranea 300 Class, also known as "Vittorio Emanuele II", was the first steam locomotive in continental Europe to have the 4-6-0 'Ten-Wheeler' arrangement.[1][2][3]

Design and construction

Designed by Cesare Frescot, the Class 650 was designed in light of the forthcoming opening (in 1889) of the new relief Giovi railway, which supplemented the old line opened in the 1850s and was less steep (1.6% maximum instead of 3.5%).[1][2]

Previous fast locomotives were of the 4-4-0 arrangement; Frescot decided to add one more driving axle to ensure that the locomotive would be able to pull the increased loads without exceeding the axle load limits. He also discarded the Belpaire firebox, common in SFAI locomotive practice, for a round-top firebox, which would be a mainstay of Italian locomotive practice. The first locomotives had a working boiler pressure of 10 kilograms per square centimetre (981 kPa; 142 psi), while subsequent locomotives enjoyed a greater pressure of 11 kilograms per square centimetre (1,080 kPa; 156 psi); three locomotives were also fitted a longer boiler with a combustion chamber. The bogie had a small wheelbase, to keep the locomotive as short as possible.[1][4]

The first locomotive was built in the SFAI's Turin works in 1884; the other fifty-four locomotives were built from 1887 to 1896: 36 by Ansaldo, thirteen by Maffei and five by Officine Miani & Silvestri.[5]

Service and modifications

The first locomotive was the only one given a running number by the Società per le strade ferrate dell'Alta Italia, and was also the only one given a name ("Vittorio Emanuele II", in honour of King Victor Emmanuel II of Italy), as just as it was completed the transition between the SFAI and the Rete Mediterranea was being executed.

The Class 650 proved very successful, being able to pull 130 tons over the new Giovi railway at a speed of 45 kilometres per hour (28 mph). However, the steady increasing of the train's weight meant that these locomotives were gradually replaced by more powerful ones. The last locomotives of the Class 650 were withdrawn in the 1920s, with none surviving into preservation.[6][5][7]

Some units of the class were rebuilt under the FS period with the boiler of the FS Class 656.[8][5]

Trivia

The "Vittorio Emanuele II" is one of the locomotives available in the PC game Railroad Tycoon 3.

References

  • Cornolò, Giovanni (May 2014). "Locomotive a vapore". TuttoTreno (2). 
  • Kalla-Bishop, P. M. (1986). Italian state railways steam locomotives : together with low-voltage direct current and three-phase motive power. Abingdon: Tourret Publishing. ISBN 0905878035. 
  • Hollingsworth, Brian; Cook, Arthur (2003). The great book of trains : featuring 310 locomotives shown in more than 160 full-colour illustrations and 500 photographs. London: Salamander Books. ISBN 0861019199. 
This article is issued from Wikipedia - version of the Wednesday, January 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.