Electron paramagnetic resonance

Electron paramagnetic resonance (EPR) or electron spin resonance (ESR) spectroscopy is a technique for studying materials with unpaired electrons. The basic concepts of EPR are analogous to those of nuclear magnetic resonance (NMR), but it is electron spins that are excited instead of the spins of atomic nuclei. EPR spectroscopy is particularly useful for studying metal complexes or organic radicals. EPR was first observed in Kazan State University by Soviet physicist Yevgeny Zavoisky in 1944, and was developed independently at the same time by Brebis Bleaney at the University of Oxford.

EPR spectrometer

Theory

Origin of an EPR signal

Every electron has a magnetic moment and spin quantum number $s = \tfrac{1}{2}$ , with magnetic components $m_\mathrm{s} = + \tfrac{1}{2}$ and $m_\mathrm{s} = - \tfrac{1}{2}$ . In the presence of an external magnetic field with strength $B_\mathrm{0}$ , the electron's magnetic moment aligns itself either parallel ( $m_\mathrm{s} = - \tfrac{1}{2}$ ) or antiparallel ( $m_\mathrm{s} = + \tfrac{1}{2}$ ) to the field, each alignment having a specific energy due to the Zeeman effect:

E = m_s g_e \mu_\text{B} B_0,

where

$g_e$ is the electron's so-called g-factor (see also the Landé g-factor), $g_\mathrm{e} = 2.0023$ for the free electron,^[1]
$\mu_\text{B}$ is the Bohr magneton.

Therefore, the separation between the lower and the upper state is $\Delta E = g_e \mu_\text{B} B_0$ for unpaired free electrons. This equation implies that the splitting of the energy levels is directly proportional to the magnetic field's strength, as shown in the diagram below.

An unpaired electron can move between the two energy levels by either absorbing or emitting a photon of energy $h \nu$ such that the resonance condition, $h \nu = \Delta E$ , is obeyed. This leads to the fundamental equation of EPR spectroscopy: $h \nu = g_e \mu_\text{B} B_0$ .

Experimentally, this equation permits a large combination of frequency and magnetic field values, but the great majority of EPR measurements are made with microwaves in the 9000–10000 MHz (9–10 GHz) region, with fields corresponding to about 3500 G (0.35 T). Furthermore, EPR spectra can be generated by either varying the photon frequency incident on a sample while holding the magnetic field constant or doing the reverse. In practice, it is usually the frequency that is kept fixed. A collection of paramagnetic centers, such as free radicals, is exposed to microwaves at a fixed frequency. By increasing an external magnetic field, the gap between the $m_\mathrm{s} = + \tfrac{1}{2}$ and $m_\mathrm{s} = - \tfrac{1}{2}$ energy states is widened until it matches the energy of the microwaves, as represented by the double arrow in the diagram above. At this point the unpaired electrons can move between their two spin states. Since there typically are more electrons in the lower state, due to the Maxwell–Boltzmann distribution (see below), there is a net absorption of energy, and it is this absorption that is monitored and converted into a spectrum. The upper spectrum below is the simulated absorption for a system of free electrons in a varying magnetic field. The lower spectrum is the first derivative of the absorption spectrum. The latter is the most common way to record and publish EPR spectra.

For the microwave frequency of 9388.2 MHz, the predicted resonance occurs at a magnetic field of about $B_0 = h \nu / g_e \mu_\text{B}$ = 0.3350 teslas = 3350 gausses.

Because of electron-nuclear mass differences, the magnetic moment of an electron is substantially larger than the corresponding quantity for any nucleus, so that a much higher electromagnetic frequency is needed to bring about a spin resonance with an electron than with a nucleus, at identical magnetic field strengths. For example, for the field of 3350 G shown at the right, spin resonance occurs near 9388.2 MHz for an electron compared to only about 14.3 MHz for ¹H nuclei. (For NMR spectroscopy, the corresponding resonance equation is $h\nu = g_\mathrm{N} \mu_\mathrm{N} B_0$ where $g_\mathrm{N}$ and $\mu_\mathrm{N}$ depend on the nucleus under study.)

Maxwell–Boltzmann distribution

In practice, EPR samples consist of collections of many paramagnetic species, and not single isolated paramagnetic centers. If the population of radicals is in thermodynamic equilibrium, its statistical distribution is described by the Maxwell–Boltzmann equation:

\frac{ n_\text{upper} }{ n_\text{lower} } = \exp{ \left( -\frac{ E_\text{upper}-E_\text{lower} }{ kT } \right) } = \exp{ \left( -\frac{ \Delta E }{ kT } \right) } = \exp{ \left( -\frac{ \epsilon }{ kT } \right) } = \exp{ \left( -\frac{ h\nu }{ kT }\right) }, \qquad \text{(Eq. 1)}

where $n_\text{upper}$ is the number of paramagnetic centers occupying the upper energy state, $k$ is the Boltzmann constant, and $T$ is the thermodynamic temperature. At 298 K, X-band microwave frequencies ( $\nu$ ≈ 9.75 GHz) give $n_\text{upper} / n_\text{lower}$ ≈ 0.998, meaning that the upper energy level has a slightly smaller population than the lower one. Therefore, transitions from the lower to the higher level are more probable than the reverse, which is why there is a net absorption of energy.

The sensitivity of the EPR method (i.e., the minimal number of detectable spins $N_\text{min}$ ) depends on the photon frequency $\nu$ according to

N_\text{min} = \frac{k_1V}{Q_0k_f \nu^2 P^{1/2}}, \qquad \text{(Eq. 2)}

where $k_1$ is a constant, $V$ is the sample's volume, $Q_0$ is the unloaded quality factor of the microwave cavity (sample chamber), $k_f$ is the cavity filling coefficient, and $P$ is the microwave power in the spectrometer cavity. With $k_f$ and $P$ being constants, $N_\text{min}$ ~ $(Q_0\nu^2)^{-1}$ , i.e., $N_\text{min}$ ~ $\nu^{-\alpha}$ , where $\alpha$ ≈ 1.5. In practice, $\alpha$ can change varying from 0.5 to 4.5 depending on spectrometer characteristics, resonance conditions, and sample size.

A great sensitivity is therefore obtained with a low detection limit $N_\text{min}$ and a large number of spins. Therefore, the required parameters are:

A high spectrometer frequency to maximize the Eq. 2. Common frequencies are discussed below
A low temperature to decrease the number of spin at the high level of energy as shown in Eq. 1. This condition explains why spectra are often recorded on sample at the boiling point of liquid nitrogen or liquid helium.

Spectral parameters

In real systems, electrons are normally not solitary, but are associated with one or more atoms. There are several important consequences of this:

An unpaired electron can gain or lose angular momentum, which can change the value of its g-factor, causing it to differ from $g_e$ . This is especially significant for chemical systems with transition-metal ions.
The magnetic moment of a nucleus with a non-zero nuclear spin will affect any unpaired electrons associated with that atom. This leads to the phenomenon of hyperfine coupling, analogous to J-coupling in NMR, splitting the EPR resonance signal into doublets, triplets and so forth.
Interactions of an unpaired electron with its environment influence the shape of an EPR spectral line. Line shapes can yield information about, for example, rates of chemical reactions.
The g-factor and hyperfine coupling in an atom or molecule may not be the same for all orientations of an unpaired electron in an external magnetic field. This anisotropy depends upon the electronic structure of the atom or molecule (e.g., free radical) in question, and so can provide information about the atomic or molecular orbital containing the unpaired electron.

The g factor

Knowledge of the g-factor can give information about a paramagnetic center's electronic structure. An unpaired electron responds not only to a spectrometer's applied magnetic field $B_0$ but also to any local magnetic fields of atoms or molecules. The effective field $B_\text{eff}$ experienced by an electron is thus written

B_\text{eff} = B_0(1 - \sigma),

where $\sigma$ includes the effects of local fields ( $\sigma$ can be positive or negative). Therefore, the $h \nu = g_e \mu_\text{B} B_\text{eff}$ resonance condition (above) is rewritten as follows:

h\nu = g_e \mu_B B_\text{eff} = g_e \mu_\text{B} B_0 (1 - \sigma).

The quantity $g_e(1 - \sigma)$ is denoted $g$ and called simply the g-factor, so that the final resonance equation becomes

h \nu = g \mu_\text{B} B_0.

This last equation is used to determine $g$ in an EPR experiment by measuring the field and the frequency at which resonance occurs. If $g$ does not equal $g_e$ , the implication is that the ratio of the unpaired electron's spin magnetic moment to its angular momentum differs from the free-electron value. Since an electron's spin magnetic moment is constant (approximately the Bohr magneton), then the electron must have gained or lost angular momentum through spin–orbit coupling. Because the mechanisms of spin–orbit coupling are well understood, the magnitude of the change gives information about the nature of the atomic or molecular orbital containing the unpaired electron.

In general, the g factor is not a number but a second-rank tensor represented by 9 numbers arranged in a 3×3 matrix. The principal axes of this tensor are determined by the local fields, for example, by the local atomic arrangement around the unpaired spin in a solid or in a molecule. Choosing an appropriate coordinate system (say, x,y,z) allows to "diagonalize" this tensor, thereby reducing the maximal number of its components from 9 to 3: g_xx, g_yy and g_zz. For a single spin experiencing only Zeeman interaction with an external magnetic field, the position of the EPR resonance is given by the expression g_xxB_x + g_yyB_y + g_zzB_z. Here B_x, B_y and B_z are the components of the magnetic field vector in the coordinate system (x,y,z); their magnitudes change as the field is rotated, so as the frequency of the resonance. For a large ensemble of randomly oriented spins, the EPR spectrum consists of three peaks of characteristic shape at frequencies g_xxB₀, g_yyB₀ and g_zzB₀: the low-frequency peak is positive in first-derivative spectra, the high-frequency peak is negative, and the central peak is bipolar. Such situation is commonly observed in powders, and the spectra are therefore called "powder-pattern spectra". In crystals, the number of EPR lines is determined by the number of crystallographically equivalent orientations of the EPR spin (called "EPR center").

Hyperfine coupling

Since the source of an EPR spectrum is a change in an electron's spin state, it might be thought that all EPR spectra for a single electron spin would consist of one line. However, the interaction of an unpaired electron, by way of its magnetic moment, with nearby nuclear spins, results in additional allowed energy states and, in turn, multi-lined spectra. In such cases, the spacing between the EPR spectral lines indicates the degree of interaction between the unpaired electron and the perturbing nuclei. The hyperfine coupling constant of a nucleus is directly related to the spectral line spacing and, in the simplest cases, is essentially the spacing itself.

Two common mechanisms by which electrons and nuclei interact are the Fermi contact interaction and by dipolar interaction. The former applies largely to the case of isotropic interactions (independent of sample orientation in a magnetic field) and the latter to the case of anisotropic interactions (spectra dependent on sample orientation in a magnetic field). Spin polarization is a third mechanism for interactions between an unpaired electron and a nuclear spin, being especially important for $\pi$ -electron organic radicals, such as the benzene radical anion. The symbols "a" or "A" are used for isotropic hyperfine coupling constants, while "B" is usually employed for anisotropic hyperfine coupling constants.^[2]

In many cases, the isotropic hyperfine splitting pattern for a radical freely tumbling in a solution (isotropic system) can be predicted.

For a radical having M equivalent nuclei, each with a spin of I, the number of EPR lines expected is 2MI + 1. As an example, the methyl radical, CH₃, has three ¹H nuclei, each with I = 1/2, and so the number of lines expected is 2MI + 1 = 2(3)(1/2) + 1 = 4, which is as observed.
For a radical having M₁ equivalent nuclei, each with a spin of I₁, and a group of M₂ equivalent nuclei, each with a spin of I₂, the number of lines expected is (2M₁I₁ + 1) (2M₂I₂ + 1). As an example, the methoxymethyl radical, H₂C(OCH₃), has two equivalent ¹H nuclei, each with I = 1/2 and three equivalent ¹H nuclei each with I = 1/2, and so the number of lines expected is (2M₁I₁ + 1) (2M₂I₂ + 1) = [2(2)(1/2) + 1][2(3)(1/2) + 1] = 3×4 = 12, again as observed.

Simulated EPR spectrum of the CH₃ radical

The above can be extended to predict the number of lines for any number of nuclei.

While it is easy to predict the number of lines a radical's EPR spectrum should show, the reverse problem, unraveling a complex multi-line EPR spectrum and assigning the various spacings to specific nuclei, is more difficult.

In the oft-encountered case of I = 1/2 nuclei (e.g., ¹H, ¹⁹F, ³¹P), the line intensities produced by a population of radicals, each possessing M equivalent nuclei, will follow Pascal's triangle. For example, the spectrum at the right shows that the three ¹H nuclei of the CH₃ radical give rise to 2MI + 1 = 2(3)(1/2) + 1 = 4 lines with a 1:3:3:1 ratio. The line spacing gives a hyperfine coupling constant of a_H = 23 G for each of the three ¹H nuclei. Note again that the lines in this spectrum are first derivatives of absorptions.

Simulated EPR spectrum of the H₂C(OCH₃) radical

As a second example, consider the methoxymethyl radical, H₂C(OCH₃). The two equivalent methyl hydrogens will give an overall 1:2:1 EPR pattern, each component of which is further split by the three methoxy hydrogens into a 1:3:3:1 pattern to give a total of 3×4 = 12 lines, a triplet of quartets. A simulation of the observed EPR spectrum is shown at the right and agrees with the 12-line prediction and the expected line intensities. Note that the smaller coupling constant (smaller line spacing) is due to the three methoxy hydrogens, while the larger coupling constant (line spacing) is from the two hydrogens bonded directly to the carbon atom bearing the unpaired electron. It is often the case that coupling constants decrease in size with distance from a radical's unpaired electron, but there are some notable exceptions, such as the ethyl radical (CH₂CH₃).

Resonance linewidth definition

Resonance linewidths are defined in terms of the magnetic induction B and its corresponding units, and are measured along the x axis of an EPR spectrum, from a line's center to a chosen reference point of the line. These defined widths are called halfwidths and possess some advantages: for asymmetric lines, values of left and right halfwidth can be given. The halfwidth $\Delta B_h$ is the distance measured from the line's center to the point in which absorption value has half of maximal absorption value in the center of resonance line. First inclination width $\Delta B_{1/2}$ is a distance from center of the line to the point of maximal absorption curve inclination. In practice, a full definition of linewidth is used. For symmetric lines, halfwidth $\Delta B_{1/2} = 2\Delta B_h$ , and full inclination width $\Delta B_\text{max} = 2\Delta B_{1s}$ .

Pulsed EPR

For more details on this topic, see Pulsed EPR.

The dynamics of electron spins are best studied with pulsed measurements.^[3] Microwave pulses typically 10–100 ns long are used to control the spins in the Bloch sphere. The spin–lattice relaxation time can be measured with an inversion recovery experiment.

As with pulsed NMR, the Hahn echo is central to many pulsed EPR experiments. A Hahn echo decay experiment can be used to measure the dephasing time, as shown in the animation below. The size of the echo is recorded for different spacings of the two pulses. This reveals the decoherence, which is not refocused by the $\pi$ pulse. In simple cases, an exponential decay is measured, which is described by the $T_2$ time.

Applications

EPR/ESR spectroscopy is used in various branches of science, such as biology, chemistry and physics, for the detection and identification of free radicals and paramagnetic centers such as F-centers. EPR is a sensitive, specific method for studying both radicals formed in chemical reactions and the reactions themselves. For example, when ice (solid H₂O) is decomposed by exposure to high-energy radiation, radicals such as H, OH, and HO₂ are produced. Such radicals can be identified and studied by EPR. Organic and inorganic radicals can be detected in electrochemical systems and in materials exposed to UV light. In many cases, the reactions to make the radicals and the subsequent reactions of the radicals are of interest, while in other cases EPR is used to provide information on a radical's geometry and the orbital of the unpaired electron.

Miniature electron spin resonance spectroscopy with Micro-ESR

Miniaturisation of military radar technologies allowed the development of miniature microwave electronics as a spin-off by the California Institute of Technology. Since 2007 these sensors have been employed in miniaturized electron spin resonance spectrometers called Micro-ESR.

The high cost, large size, and difficult maintenance of electron spin resonance spectrometers has limited their use to specialized research centers with highly trained personnel. Micro-ESR makes ESR feasible for nonspecialists to determine oxidation by directly measuring of free radicals.

Applications include real-time monitoring of free radical containing asphaltenes in (crude) oils, biomedical R&D to measure oxidative stress, evaluation of the shelf life of food products.

Medical and biological applications of EPR also exist. Although radicals are very reactive, and so do not normally occur in high concentrations in biology, special reagents have been developed to spin-label molecules of interest. These reagents are particularly useful in biological systems. Specially-designed nonreactive radical molecules can attach to specific sites in a biological cell, and EPR spectra can then give information on the environment of these so-called spin labels or spin probes. Spin-labeled fatty acids have been extensively used to study dynamic organisation of lipids in biological membranes,^[4] lipid-protein interactions^[5] and temperature of transition of gel to liquid crystalline phases.^[6]

A type of dosimetry system has been designed for reference standards and routine use in medicine, based on EPR signals of radicals from irradiated polycrystalline α-alanine (the alanine deamination radical, the hydrogen abstraction radical, and the (CO⁻(OH))=C(CH₃)NH₂⁺ radical) . This method is suitable for measuring gamma and x-rays, electrons, protons, and high-linear energy transfer (LET) radiation of doses in the 1 Gy to 100 kGy range.^[7]

EPR/ESR spectroscopy can be applied only to systems in which the balance between radical decay and radical formation keeps the free radicals concentration above the detection limit of the spectrometer used. This can be a particularly severe problem in studying reactions in liquids. An alternative approach is to slow down reactions by studying samples held at cryogenic temperatures, such as 77 K (liquid nitrogen) or 4.2 K (liquid helium). An example of this work is the study of radical reactions in single crystals of amino acids exposed to x-rays, work that sometimes leads to activation energies and rate constants for radical reactions.

The study of radiation-induced free radicals in biological substances (for cancer research) poses the additional problem that tissue contains water, and water (due to its electric dipole moment) has a strong absorption band in the microwave region used in EPR spectrometers.

EPR/ESR also has been used by archaeologists for the dating of teeth. Radiation damage over long periods of time creates free radicals in tooth enamel, which can then be examined by EPR and, after proper calibration, dated. Alternatively, material extracted from the teeth of people during dental procedures can be used to quantify their cumulative exposure to ionizing radiation. People exposed to radiation from the Chernobyl disaster have been examined by this method.^[8]^[9]

Radiation-sterilized foods have been examined with EPR spectroscopy, the aim being to develop methods to determine whether a particular food sample has been irradiated and to what dose.

Because of its high sensitivity, EPR was used recently to measure the quantity of energy used locally during a mechanochemical milling process.^[10]

EPR/ESR spectroscopy has been used to measure properties of crude oil, in particular asphaltene and vanadium content. EPR measurement of asphaltene content is a function of spin density and solvent polarity. Prior work dating to the 1960s has demonstrated the ability to measure vanadium content to sub-ppm levels.

In the field of quantum computing, pulsed EPR is used to control the state of electron spin qubits in materials such as diamond, silicon and gallium arsenide.

High-field high-frequency measurements

High-field high-frequency EPR measurements are sometimes needed to detect subtle spectroscopic details. However, for many years the use of electromagnets to produce the needed fields above 1.5 T was impossible, due principally to limitations of traditional magnet materials. The first multifunctional millimeter EPR spectrometer with a superconducting solenoid was described in the early 1970s by Prof. Y. S. Lebedev's group (Russian Institute of Chemical Physics, Moscow) in collaboration with L. G. Oranski's group (Ukrainian Physics and Technics Institute, Donetsk), which began working in the Institute of Problems of Chemical Physics, Chernogolovka around 1975.^[11] Two decades later, a W-band EPR spectrometer was produced as a small commercial line by the German Bruker Company, initiating the expansion of W-band EPR techniques into medium-sized academic laboratories.

Waveband	L	S	C	X	P	K	Q	U	V	E	W	F	D	—	J	—
$\lambda/\text{mm}$	300	100	75	30	20	12.5	8.5	6	4.6	4	3.2	2.7	2.1	1.6	1.1	0.83
$\nu / \text{GHz}$	1	3	4	10	15	24	35	50	65	75	95	111	140	190	285	360
$B_0 / \text{T}$	0.03	0.11	0.14	0.33	0.54	0.86	1.25	1.8	2.3	2.7	3.5	3.9	4.9	6.8	10.2	12.8

The EPR waveband is stipulated by the frequency or wavelength of a spectrometer's microwave source (see Table).

EPR experiments often are conducted at X and, less commonly, Q bands, mainly due to the ready availability of the necessary microwave components (which originally were developed for radar applications). A second reason for widespread X and Q band measurements is that electromagnets can reliably generate fields up to about 1 tesla. However, the low spectral resolution over g-factor at these wavebands limits the study of paramagnetic centers with comparatively low anisotropic magnetic parameters. Measurements at $\nu$ > 40 GHz, in the millimeter wavelength region, offer the following advantages:

EPR spectra of TEMPO, a nitroxide radical, as a function of frequency. Note the improvement in resolution from left to right.^[11]

EPR spectra are simplified due to the reduction of second-order effects at high fields.
Increase in orientation selectivity and sensitivity in the investigation of disordered systems.
The informativity and precision of pulse methods, e.g., ENDOR also increase at high magnetic fields.
Accessibility of spin systems with larger zero-field splitting due to the larger microwave quantum energy h $\nu$ .
The higher spectral resolution over g-factor, which increases with irradiation frequency $\nu$ and external magnetic field B₀. This is used to investigate the structure, polarity, and dynamics of radical microenvironments in spin-modified organic and biological systems through the spin label and probe method. The figure shows how spectral resolution improves with increasing frequency.
Saturation of paramagnetic centers occurs at a comparatively low microwave polarizing field B₁, due to the exponential dependence of the number of excited spins on the radiation frequency $\nu$ . This effect can be successfully used to study the relaxation and dynamics of paramagnetic centers as well as of superslow motion in the systems under study.
The cross-relaxation of paramagnetic centers decreases dramatically at high magnetic fields, making it easier to obtain more-precise and more-complete information about the system under study.^[11]

This was demonstrated experimentally in the study of various biological, polymeric and model systems at D-band EPR.^[12]

References

↑ Odom, B.; Hanneke, D.; D'Urso, B.; and Gabrielse, G. (2006). "New Measurement of the Electron Magnetic Moment Using a One-Electron Quantum Cyclotron". Physical Review Letters 97 (3): 030801. Bibcode:2006PhRvL..97c0801O. doi:10.1103/PhysRevLett.97.030801. PMID 16907490.
↑ Strictly speaking, "a" refers to the hyperfine splitting constant, a line spacing measured in magnetic field units, while A and B refer to hyperfine coupling constants measured in frequency units. Splitting and coupling constants are proportional, but not identical. The book by Wertz and Bolton has more information (pp. 46 and 442). Wertz, J. E., & Bolton, J. R. (1972). Electron spin resonance: Elementary theory and practical applications. New York: McGraw-Hill.
↑ Arthur Schweiger, Gunnar Jeschke (2001). Principles of Pulse Electron Paramagnetic Resonance. Oxford University Press. ISBN 978-0-19-850634-8.
↑ Yashroy, R. C. (1990). "Magnetic resonance studies of dynamic organisation of lipids in chloroplast membranes". Journal of Biosciences 15 (4): 281. doi:10.1007/BF02702669.
↑ Yashroy, R. C. (1991). "Protein heat denaturation and study of membrane lipid-protein interactions by spin label ESR". Journal of Biochemical and Biophysical Methods 22 (1): 55–9. doi:10.1016/0165-022X(91)90081-7. PMID 1848569.
↑ Yashroy, R. C. (1990). "Determination of membrane lipid phase transition temperature from 13C-NMR intensities". Journal of Biochemical and Biophysical Methods 20 (4): 353–6. doi:10.1016/0165-022X(90)90097-V. PMID 2365951.
↑ "Dosimetry Systems". Journal of the ICRU 8 (5): 29. 2008. doi:10.1093/jicru/ndn027.
↑ Gualtieri, G.; Colacicchia, S; Sgattonic, R.; Giannonic, M. (2001). "The Chernobyl Accident: EPR Dosimetry on Dental Enamel of Children". Applied Radiation and Isotopes 55 (1): 71–79. doi:10.1016/S0969-8043(00)00351-1. PMID 11339534.
↑ Chumak, V.; Sholom, S.; Pasalskaya, L. (1999). "Application of High Precision EPR Dosimetry with Teeth for Reconstruction of Doses to Chernobyl Populations". Radiation Protection Dosimetry 84: 515–520. doi:10.1093/oxfordjournals.rpd.a032790.
↑ Baron, M., Chamayou, A., Marchioro, L., Raffi, J. (2005). "Radicalar probes to measure the action of energy on granular materials". Adv. Powder Technol 16 (3): 199–212. doi:10.1163/1568552053750242.
1 2 3 EPR of low-dimensional systems
↑ Krinichnyi, V.I. (1995) 2-mm Wave Band EPR Spectroscopy of Condensed Systems, CRC Press, Boca Raton, Fl.

External links

Wikimedia Commons has media related to Electron paramagnetic resonance.

Electron Magnetic Resonance Program National High Magnetic Field Laboratory
Electron Paramagnetic Resonance (Specialist Periodical Reports) Published by the Royal Society of Chemistry
Using ESR to measure free radicals in used engine oil

Spectroscopy

Infrared	FT-IR Raman Resonance Raman Rotational Vibrational Rotational-vibrational

UV-Vis-NIR	Ultraviolet-visible Fluorescence Vibronic Near-infrared Resonance enhanced multiphoton ionization (REMPI) Laser-induced

X-ray and Photoelectron	Photoelectron Atomic Emission

Nucleon	Gamma Mössbauer

Radiowave	NMR Terahertz ESR/EPR Ferromagnetic resonance

Others	Acoustic resonance spectroscopy Auger spectroscopy Astronomical spectroscopy Cavity ring down spectroscopy Circular Dichroism spectroscopy Coherent anti-Stokes Raman spectroscopy Cold vapour atomic fluorescence spectroscopy Correlation spectroscopy Deep-level transient spectroscopy Dual polarisation interferometry Electron phenomenological spectroscopy EPR spectroscopy Force spectroscopy Fourier transform spectroscopy Hadron spectroscopy Hyperspectral imaging Inelastic electron tunneling spectroscopy Inelastic neutron scattering Laser-Induced Breakdown Spectroscopy Mössbauer spectroscopy Neutron spin echo Photoacoustic spectroscopy Photoemission spectroscopy Photothermal spectroscopy Pump-probe spectroscopy Raman optical activity spectroscopy Raman spectroscopy Saturated spectroscopy Scanning tunneling spectroscopy Spectrophotometry Time-resolved spectroscopy Time-Stretch Thermal infrared spectroscopy Video spectroscopy Vibrational circular dichroism X-ray photoelectron spectroscopy

Protein structural analysis

High resolution	Cryo-electron microscopy X-ray crystallography NMR Electron crystallography EPR

Medium resolution	Fiber diffraction Mass spectrometry SAXS

Spectroscopic	NMR Circular dichroism Dual-polarization interferometry Absorbance Fluorescence Fluorescence anisotropy

Translational Diffusion	Analytical ultracentrifugation Size exclusion chromatography Light scattering NMR

Rotational Diffusion	Fluorescence anisotropy Flow birefringence Dielectric relaxation NMR

Chemical	Hydrogen-deuterium exchange Site-directed mutagenesis Chemical modification

Thermodynamic	Equilibrium unfolding

Computational	Protein structure prediction Molecular docking

←Tertiary structure Quaternary structure→

Authority control	NDL: 00575066

This article is issued from Wikipedia - version of the Thursday, November 19, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.