Electrically conductive adhesive

An electrically conductive adhesive is a glue that is primarily used for electronics.

The electric conductivity is caused by a component that makes ca. 80% of the total mass of an electrically conductive adhesive. This conductive component is suspended in a sticky component that holds the electrically conductive adhesive together. The particles of the conductive component are in contact to each other and in this way make electric current possible.

Composition

The conductive component can be silver, copper or graphite. Other conductive materials are possible but unusual. The sticky component can be a varnish (of one component) or a synthetic resin (of one or two components).

Applications

Conductive Silver, SEM image. Visible width of picture is 434µm.

• One could fix a defective conductor on a printed circuit board using an electrically conductive adhesive. In the same way, one could fix a defective rear windscreen heater on a car using an electrically conductive adhesive.

• If just a small current is needed, a temperature-sensitive electronic element can be electrically connected to a circuit using an electrically conductive adhesive instead of soldering.

• Electrically conductive adhesives can be used to paint the inner surface of plastic boxes containing electronic devices. This makes a Faraday Cage saving the internal components from electromagnetic radiation.

• Electrically conductive adhesives are used in scanning electron microscopy (SEM) to fix and ground the sample to avoid electrostatic charging of the surface.

Further reading

This article is issued from Wikipedia - version of the Monday, June 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.