Electric dipole moment

In physics, the electric dipole moment is a measure of the separation of positive and negative electrical charges in a system of electric charges, that is, a measure of the charge system's overall polarity. The SI units are Coulomb-meter (C m), however the most commonly used unit is the Debye (D). The electric field strength of the dipole is proportional to the magnitude of dipole moment.

Elementary definition

Animation showing the electric field of an electric dipole. The dipole consists of two point electric charges of opposite polarity located close together. A transformation from a point-shaped dipole to a finite-size electric dipole is shown.
A molecule of water is polar because of the unequal sharing of its electrons in a "bent" structure. A separation of charge is present with negative charge in the middle (red shade), and positive charge at the ends (blue shade).

In the simple case of two point charges, one with charge +q and the other one with charge −q, the electric dipole moment p is:

\mathbf{p} = q\mathbf{d}

where d is the displacement vector pointing from the negative charge to the positive charge. Thus, the electric dipole moment vector p points from the negative charge to the positive charge. An idealization of this two-charge system is the electrical point dipole consisting of two (infinite) charges only infinitesimally separated, but with a finite p.

Torque

Electric dipole p and its torque τ in a uniform E field.

An object with an electric dipole moment is subject to a torque τ when placed in an external electric field. The torque tends to align the dipole with the field. A dipole aligned parallel to an electric field has lower potential energy than a dipole making some angle with it. For a spatially uniform electric field E, the torque is given by:[1]

\boldsymbol{\tau} = \bold{p} \times \bold{E} \ ,

where p is the dipole moment, and the symbol "×" refers to the vector cross product. The field vector and the dipole vector define a plane, and the torque is directed normal to that plane with the direction given by the right-hand rule.

A dipole placed parallel or anti-parallel to the direction in which a non-uniform electric field is increasing will not experience a torque, only a force in the direction of its dipole moment. It can be shown that this force will always be parallel to the dipole moment regardless of parallel or anti-parallel orientation of the dipole.

Expression (general case)

More generally, for a continuous distribution of charge confined to a volume V, the corresponding expression for the dipole moment is:

\mathbf{p}(\mathbf{r}) = \int\limits_{V} \rho(\mathbf{r}_0)\, (\mathbf{r}_0-\mathbf{r}) \ d^3 \mathbf{r}_0,

where r locates the point of observation and d3r0 denotes an elementary volume in V. For an array of point charges, the charge density becomes a sum of Dirac delta functions:

\rho (\mathbf{r}) = \sum_{i=1}^N \, q_i \, \delta (\mathbf{r} - \mathbf{r}_i ),

where each ri is a vector from some reference point to the charge qi. Substitution into the above integration formula provides:

\mathbf{p}(\mathbf{r}) = \sum_{i=1}^N \, q_i \int\limits_V \delta(\mathbf{r}_0 - \mathbf{r}_i )\, (\mathbf{r}_0 - \mathbf{r}) \ d^3 \mathbf{r}_0 = \sum_{i=1}^N \, q_i (\mathbf{r}_i-\mathbf{r}).

This expression is equivalent to the previous expression in the case of charge neutrality and N = 2. For two opposite charges, denoting the location of the positive charge of the pair as r+ and the location of the negative charge as r− :

\mathbf{p}(\mathbf{r}) =q_1(\mathbf{r}_1-\mathbf{r})+q_2(\mathbf{r}_2 - \mathbf{r}) = q(\mathbf{r}_+ -\mathbf{r})-q(\mathbf{r}_- - \mathbf{r}) = q (\mathbf{r}_+ - \mathbf{r}_-) = q\mathbf{d},

showing that the dipole moment vector is directed from the negative charge to the positive charge because the position vector of a point is directed outward from the origin to that point.

The dipole moment is most easily understood when the system has an overall neutral charge; for example, a pair of opposite charges, or a neutral conductor in a uniform electric field. For a system of charges with no net charge, visualized as an array of paired opposite charges, the relation for electric dipole moment is:

\begin{align} \mathbf{p}(\mathbf{r}) & = \sum_{i=1}^{N} \, \int\limits_V q_i [ \delta (\mathbf{r_0} - (\mathbf{r}_i + \mathbf{d}_i) )- \delta ( \mathbf{r_0} - \mathbf{r}_i ) ]\, (\mathbf{r}_0-\mathbf{r}) \ d^3 \mathbf{r}_0 \\ & = \sum_{i=1}^{N} \, q_i\, [ \mathbf{r}_i +\mathbf{d}_i - \mathbf{r} -(\mathbf{r}_i-\mathbf{r}) ] \\ & = \sum_{i=1}^{N} q_i\mathbf{d}_i = \sum_{i=1}^{N} \mathbf{p}_i \ , \end{align}

which is the vector sum of the individual dipole moments of the neutral charge pairs. (Because of overall charge neutrality, the dipole moment is independent of the observer's position r.) Thus, the value of p is independent of the choice of reference point, provided the overall charge of the system is zero.

When discussing the dipole moment of a non-neutral system, such as the dipole moment of the proton, a dependence on the choice of reference point arises. In such cases it is conventional to choose the reference point to be the center of mass of the system, not some arbitrary origin.[2] For a charged molecule the center of charge should be the reference point instead of the center of mass. For neutral systems the references point is not important. The dipole moment is an intrinsic property of the system.

Potential and field of an electric dipole

An electric dipole potential map. In blue negative potentials while in red positive ones.

An ideal dipole consists of two opposite charges with infinitesimal separation. The potential and field of such an ideal dipole are found next as a limiting case of an example of two opposite charges at non-zero separation.

Two closely spaced opposite charges have a potential of the form:

\phi(\mathbf{r})=\frac{q}{4 \pi \varepsilon _0 | \mathbf{r}- \mathbf{r}_+ |} -\frac {q}{4 \pi \varepsilon _0 | \mathbf{r}- \mathbf{r}_- | } \ ,

with charge separation, d, defined as

\mathbf{d} = \mathbf{r}_+ - \mathbf{r}_- \ ,

The position relative to their center of mass (assuming equal masses), R, and the unit vector in the direction of R are given by:

{\mathbf{R}} = \mathbf{r} - \frac{\mathbf{r}_+ + \mathbf{r}_-}{2} , \quad \hat{\mathbf{R}} = \frac {\mathbf{R}}{R} \ ,

Taylor expansion in d/R (see multipole expansion and quadrupole) allows this potential to be expressed as a series.[3][4]

\phi(\mathbf{R}) = \frac{1}{4 \pi \varepsilon _0} \frac {q\mathbf{d}\cdot\hat{\mathbf{R}}}{R^2} + O\left(\frac{d^2}{R^2}\right) \approx \frac {1}{4 \pi \varepsilon _0} \frac {\mathbf{p}\cdot\hat{\mathbf{R}}}{R^2} \ ,

where higher order terms in the series are vanishing at large distances, R, compared to d.[5] Here, the electric dipole moment p is, as above:

\mathbf{p} = q\mathbf{d} \ .

The result for the dipole potential also can be expressed as:[6]

\phi(\mathbf{R})=- \mathbf{p}\cdot\mathbf{\nabla}\frac {1}{4 \pi \varepsilon _0 R}\ ,

which relates the dipole potential to that of a point charge. A key point is that the potential of the dipole falls off faster with distance R than that of the point charge.

The electric field of the dipole is the negative gradient of the potential, leading to:[6]

\mathbf E\left(\mathbf R\right) = \frac{3(\mathbf p\cdot\hat\mathbf R)\hat\mathbf R-\mathbf p}{4\pi\varepsilon_0 R^3} \ .

Thus, although two closely spaced opposite charges are not quite an ideal electric dipole (because their potential at short distances is not that of a dipole), at distances much larger than their separation, their dipole moment p appears directly in their potential and field.

As the two charges are brought closer together (d is made smaller), the dipole term in the multipole expansion based on the ratio d/R becomes the only significant term at ever closer distances R, and in the limit of infinitesimal separation the dipole term in this expansion is all that matters. As d is made infinitesimal, however, the dipole charge must be made to increase to hold p constant. This limiting process results in a "point dipole".

Dipole moment density and polarization density

The dipole moment of an array of charges,

\bold p = \sum_{i=1}^N \ q_i \bold {d_i} \ ,

determines the degree of polarity of the array, but for a neutral array it is simply a vector property of the array with no information about the array's absolute location. The dipole moment density of the array p(r) contains both the location of the array and its dipole moment. When it comes time to calculate the electric field in some region containing the array, Maxwell's equations are solved, and the information about the charge array is contained in the polarization density P(r) of Maxwell's equations. Depending upon how fine-grained an assessment of the electric field is required, more or less information about the charge array will have to be expressed by P(r). As explained below, sometimes it is sufficiently accurate to take P(r) = p(r). Sometimes a more detailed description is needed (for example, supplementing the dipole moment density with an additional quadrupole density) and sometimes even more elaborate versions of P(r) are necessary.

It now is explored just in what way the polarization density P(r) that enters Maxwell's equations is related to the dipole moment p of an overall neutral array of charges, and also to the dipole moment density p(r) (which describes not only the dipole moment, but also the array location). Only static situations are considered in what follows, so P(r) has no time dependence, and there is no displacement current. First is some discussion of the polarization density P(r). That discussion is followed with several particular examples.

A formulation of Maxwell's equations based upon division of charges and currents into "free" and "bound" charges and currents leads to introduction of the D- and P-fields:

\bold{D} = \varepsilon _0 \bold{E} + \bold{P}\ ,

where P is called the polarization density. In this formulation, the divergence of this equation yields:

\nabla \cdot \bold{D} = \rho_f = \varepsilon _0 \nabla \cdot \bold{E} +\nabla \cdot \bold{P}\ ,

and as the divergence term in E is the total charge, and ρf is "free charge", we are left with the relation:

\nabla \cdot \bold{P} = -\rho_b \ ,

with ρb as the bound charge, by which is meant the difference between the total and the free charge densities.

As an aside, in the absence of magnetic effects, Maxwell's equations specify that

\nabla \times \bold{E} = \boldsymbol{0} \ ,

which implies

\nabla \times \left( \bold{D} - \bold{P} \right) = \boldsymbol{0} \ ,

Applying Helmholtz decomposition:[7]

\bold{ D-P = -\nabla } \varphi \ ,

for some scalar potential φ, and:

\bold {\nabla \cdot (D-P)} =\varepsilon_0 \bold {\nabla \cdot E}=\rho_f +\rho_b = -\nabla ^2 \varphi \ .

Suppose the charges are divided into free and bound, and the potential is divided into

\varphi = \varphi_f + \varphi_b \ .

Satisfaction of the boundary conditions upon φ may be divided arbitrarily between φf and φb because only the sum φ must satisfy these conditions. It follows that P is simply proportional to the electric field due to the charges selected as bound, with boundary conditions that prove convenient.[8][9] In particular, when no free charge is present, one possible choice is P = ε0 E.

Next is discussed how several different dipole-moment descriptions of a medium relate to the polarization entering Maxwell's equations.

Medium with charge and dipole densities

As described next, a model for polarization moment density p(r) results in a polarization

\bold{P}(\bold{r})= \bold{p}(\bold{r}) \,

restricted to the same model. For a smoothly varying dipole moment distribution p(r), the corresponding bound charge density is simply

\nabla \cdot \bold{p} (\bold{r}) = \rho_b,

as we will establish shortly via integration by parts. However, if p(r) exhibits an abrupt step in dipole moment at a boundary between two regions, ∇•p(r) results in a surface charge component of bound charge. This surface charge can be treated through a surface integral, or by using discontinuity conditions at the boundary, as illustrated in the various examples below.

As a first example relating dipole moment to polarization, consider a medium made up of a continuous charge density ρ(r) and a continuous dipole moment distribution p(r).[10] The potential at a position r is:[11][12]

\phi ( \bold{r} ) = \frac {1}{4 \pi \varepsilon_0}\int \frac { \rho ( \bold{ r}_0 )} {| \bold{ r}- \bold{r}_0 | } d^3 \bold{ r}_0 \ + \frac {1}{4 \pi \varepsilon_0}\int \frac { \bold{p} ( \bold{ r}_0 )\bold{\cdot (r - r_0)}} {| \bold{ r}- \bold{r}_0 |^3 } d^3 \bold{ r}_0 ,

where ρ(r) is the unpaired charge density, and p(r) is the dipole moment density.[13] Using an identity:

\nabla_{\bold {r}_0} \frac {1}{|\bold r - \bold{r}_0|} = \frac {\bold r - \bold{r}_0}{|\bold r - \bold{r}_0|^3}

the polarization integral can be transformed:

\frac {1}{4 \pi \varepsilon_0}\int \frac { \bold{p} ( \bold{ r}_0 )\bold{\cdot (r - r_0)}} {| \bold{ r}- \bold{r}_0 |^3 } d^3 \bold{ r}_0 =\frac {1}{4 \pi \varepsilon_0}\int \bold{p} ( \bold{ r}_0 )\bold{\cdot \nabla}_{\bold {r}_0} \frac {1}{|\bold r - \bold{r}_0|} d^3 \bold{ r}_0 ,
=\frac {1}{4 \pi \varepsilon_0}\int \bold{\nabla_{\bold {r_0}}\cdot} \left( \bold{p} ( \bold{ r}_0 ) \frac {1}{|\bold r - \bold{r}_0|} \right) d^3 \bold{ r}_0 -\frac {1}{4 \pi \varepsilon_0}\int \frac {\bold{\nabla_{\bold {r_0}}\cdot} \bold{p} ( \bold{ r}_0 )}{|\bold r - \bold{r}_0|} d^3 \bold{ r}_0 ,

The first term can be transformed to an integral over the surface bounding the volume of integration, and contributes a surface charge density, discussed later. Putting this result back into the potential, and ignoring the surface charge for now:

\phi ( \bold{r} ) = \frac {1}{4 \pi \varepsilon_0}\int \frac { \rho ( \bold{ r}_0 )-\bold{\nabla_{\bold {r_0}}\cdot} \bold{p} ( \bold{ r}_0 )} {| \bold{ r}- \bold{r}_0 | } d^3 \bold{ r}_0 \ ,

where the volume integration extends only up to the bounding surface, and does not include this surface.

The potential is determined by the total charge, which the above shows consists of:

\rho_{\rm total} (\bold{ r}_0)= \rho ( \bold{ r}_0 )-\bold{\nabla_{\bold {r_0}}\cdot} \bold{p} ( \bold{ r}_0 ) \ ,

showing that:

-\bold{\nabla_{\bold {r_0}}\cdot} \bold{p} ( \bold{ r}_0 ) = \rho_b \ .

In short, the dipole moment density p(r) plays the role of the polarization density P for this medium. Notice, p(r) has a non-zero divergence equal to the bound charge density (as modeled in this approximation).

It may be noted that this approach can be extended to include all the multipoles: dipole, quadrupole, etc.[14][15] Using the relation:

\nabla \cdot \bold{D} = \rho_f \ ,

the polarization density is found to be:

\bold{P}(\bold{r}) = \bold{p}_{\rm dip} - \nabla \cdot \bold{p}_{\rm quad} + \ldots \ ,

where the added terms are meant to indicate contributions from higher multipoles. Evidently, inclusion of higher multipoles signifies that the polarization density P no longer is determined by a dipole moment density p alone. For example, in considering scattering from a charge array, different multipoles scatter an electromagnetic wave differently and independently, requiring a representation of the charges that goes beyond the dipole approximation.[16]

Surface charge

A uniform array of identical dipoles is equivalent to a surface charge.

Above, discussion was deferred for the first term in the expression for the potential due to the dipoles. Integrating the divergence results in a surface charge. The figure at the right provides an intuitive idea of why a surface charge arises. The figure shows a uniform array of identical dipoles between two surfaces. Internally, the heads and tails of dipoles are adjacent and cancel. At the bounding surfaces, however, no cancellation occurs. Instead, on one surface the dipole heads create a positive surface charge, while at the opposite surface the dipole tails create a negative surface charge. These two opposite surface charges create a net electric field in a direction opposite to the direction of the dipoles.

This idea is given mathematical form using the potential expression above. The potential is:

\phi ( \bold{r} ) =\frac {1}{4 \pi \varepsilon_0}\int \bold{\nabla_{\bold {r_0}}\cdot} \left( \bold{p} ( \bold{ r}_0 ) \frac {1}{|\bold r - \bold{r}_0|} \right) d^3 \bold{ r}_0-\frac {1}{4 \pi \varepsilon_0}\int \frac {\bold{\nabla_{\bold {r_0}}\cdot} \bold{p} ( \bold{ r}_0 )}{|\bold r - \bold{r}_0|} d^3 \bold{ r}_0 \ .

Using the divergence theorem, the divergence term transforms into the surface integral:

\frac {1}{4 \pi \varepsilon_0}\int \bold{\nabla_{\bold {r_0}}\cdot} \left( \bold{p} ( \bold{ r}_0 ) \frac {1}{|\bold r - \bold{r}_0|} \right) d^3 \bold{ r}_0
=\frac {1}{4 \pi \varepsilon_0}\int \frac {\bold{p} ( \bold{ r}_0 )\bold{\cdot } d \bold {A_0 } } {|\bold r - \bold{r}_0|} \ ,

with dA0 an element of surface area of the volume. In the event that p(r) is a constant, only the surface term survives:

\phi ( \bold{r} )=\frac {1}{4 \pi \varepsilon_0}\int \frac {1}{|\bold r - \bold{r}_0|}\ \bold{p} \cdot d\bold{A_0} \ ,

with dA0 an elementary area of the surface bounding the charges. In words, the potential due to a constant p inside the surface is equivalent to that of a surface charge

\sigma = \bold{p}\cdot d \bold{A} \,

which is positive for surface elements with a component in the direction of p and negative for surface elements pointed oppositely. (Usually the direction of a surface element is taken to be that of the outward normal to the surface at the location of the element.)

If the bounding surface is a sphere, and the point of observation is at the center of this sphere, the integration over the surface of the sphere is zero: the positive and negative surface charge contributions to the potential cancel. If the point of observation is off-center, however, a net potential can result (depending upon the situation) because the positive and negative charges are at different distances from the point of observation.[17] The field due to the surface charge is:

\bold E ( \bold{r} ) =-\frac {1}{4 \pi \varepsilon_0} \nabla_{\bold {r}}\int \frac {1}{|\bold r - \bold{r}_0|}\ \bold{p} \cdot d\bold{A_0} \ ,

which, at the center of a spherical bounding surface is not zero (the fields of negative and positive charges on opposite sides of the center add because both fields point the same way) but is instead :[18]

\bold E =-\frac {\bold p}{3 \varepsilon_0} \ .

If we suppose the polarization of the dipoles was induced by an external field, the polarization field opposes the applied field and sometimes is called a depolarization field.[19][20] In the case when the polarization is outside a spherical cavity, the field in the cavity due to the surrounding dipoles is in the same direction as the polarization.[21]

In particular, if the electric susceptibility is introduced through the approximation:

\bold{p(r)} = \varepsilon_0 \chi(\bold r ) \bold {E(r)} \ ,

where E, in this case and in the following, represent the external field which induces the polarization.

Then:

\bold { \nabla \cdot p(r)}=\bold { \nabla \cdot} \left( \chi \bold{ (r)}\varepsilon_0 \bold {E(r)}\right) =-\rho_b \ .

Whenever χ(r) is used to model a step discontinuity at the boundary between two regions, the step produces a surface charge layer. For example, integrating along a normal to the bounding surface from a point just interior to one surface to another point just exterior:

\varepsilon_0 \hat{\bold n} \cdot \left[ \chi \bold{ (r_+)}\bold {E(r_+)}-\chi \bold{ (r_-)}\bold {E(r_-)}\right] =\frac{1}{A_n} \int d \Omega_n \ \rho_b = 0 \ ,

where An, Ωn indicate the area and volume of an elementary region straddling the boundary between the regions, and \hat{\bold n} a unit normal to the surface. The right side vanishes as the volume shrinks, inasmuch as ρb is finite, indicating a discontinuity in E, and therefore a surface charge. That is, where the modeled medium includes a step in permittivity, the polarization density corresponding to the dipole moment density

\bold{p}(\bold{r})=\chi(\bold{r})\bold{E}(\bold{r}) \,

necessarily includes the contribution of a surface charge.[22][23][24]

A physically more realistic modeling of p(r) would have the dipole moment density drop off rapidly, but smoothly to zero at the boundary of the confining region, rather than making a sudden step to zero density. Then the surface charge will not concentrate in an infinitely thin surface, but instead, being the divergence of a smoothly varying dipole moment density, will distribute itself throughout a thin, but finite transition layer.

Dielectric sphere in uniform external electric field

Field lines of the D-field in a dielectric sphere with greater susceptibility than its surroundings, placed in a previously-uniform field.[25] The field lines of the E-field (not shown) coincide everywhere with those of the D-field, but inside the sphere, their density is lower, corresponding to the fact that the E-field is weaker inside the sphere than outside. Many of the external E-field lines terminate on the surface of the sphere, where there is a bound charge.

The above general remarks about surface charge are made more concrete by considering the example of a dielectric sphere in a uniform electric field.[26][27] The sphere is found to adopt a surface charge related to the dipole moment of its interior.

A uniform external electric field is supposed to point in the z-direction, and spherical-polar coordinates are introduced so the potential created by this field is:

\phi_{\infty} = - E_{\infty}z = -E_{\infty} r \cos \theta \ .

The sphere is assumed to be described by a dielectric constant κ, that is,

\bold{D} = \kappa \epsilon_0 \bold{E} \ ,

and inside the sphere the potential satisfies Laplace's equation. Skipping a few details, the solution inside the sphere is:

\phi_< = A r \cos \theta \ ,

while outside the sphere:

\phi_> = \left(Br + \frac {C}{r^2} \right ) \cos \theta \ .

At large distances, φ> → φ∞ so B = -E∞ . Continuity of potential and of the radial component of displacement D = κε0E determine the other two constants. Supposing the radius of the sphere is R,

A = -\frac{3}{\kappa +2} E_{\infty} \ ;\ C=\frac {\kappa-1}{\kappa+2} E_{\infty} R^3 \ ,

As a consequence, the potential is:

\phi_> = \left( {-r}+\frac {\kappa-1}{\kappa+2}\frac {{R^3}}{r^2} \right)E_{\infty} \cos \theta \ ,

which is the potential due to applied field and, in addition, a dipole in the direction of the applied field (the z-direction) of dipole moment:

\bold p = 4 \pi \varepsilon_0 \left(\frac {\kappa-1}{\kappa+2}{R^3} \right) \bold{E_{\infty}} \ ,

or, per unit volume:

\frac {\bold p}{V} = {3}\varepsilon_0 \left(\frac {\kappa-1}{\kappa+2}\right) \bold{E_{\infty}} \ .

The factor (κ-1)/(κ+2) is called the Clausius-Mossotti factor and shows that the induced polarization flips sign if κ < 1. Of course, this cannot happen in this example, but in an example with two different dielectrics κ is replaced by the ratio of the inner to outer region dielectric constants, which can be greater or smaller than one. The potential inside the sphere is:

\phi_< = -\frac{3}{\kappa +2} E_{\infty}r \cos \theta \ ,

leading to the field inside the sphere:

\bold {-\nabla} \phi_< = \frac{3}{\kappa +2} \bold{ E_{\infty}} =\left( 1-\frac {\kappa-1}{\kappa+2} \right)\bold{ E_{\infty}} \ ,

showing the depolarizing effect of the dipole. Notice that the field inside the sphere is uniform and parallel to the applied field. The dipole moment is uniform throughout the interior of the sphere. The surface charge density on the sphere is the difference between the radial field components:

\sigma = {3}\varepsilon_0\frac {\kappa-1}{\kappa+2} E_{\infty} \cos \theta =\frac{1}{V} \bold{ p \cdot \hat{R}}\ .

This linear dielectric example shows that the dielectric constant treatment is equivalent to the uniform dipole-moment model and leads to zero charge everywhere except for the surface charge at the boundary of the sphere.

General media

If observation is confined to regions sufficiently remote from a system of charges, a multipole expansion of the exact polarization density can be made. By truncating this expansion (for example, retaining only the dipole terms, or only the dipole and quadrupole terms, or etc.), the results of the previous section are regained. In particular, truncating the expansion at the dipole term, the result is indistinguishable from the polarization density generated by a uniform dipole moment confined to the charge region. To the accuracy of this dipole approximation, as shown in the previous section, the dipole moment density p(r) (which includes not only p but the location of p) serves as P(r).

At locations inside the charge array, to connect an array of paired charges to an approximation involving only a dipole moment density p(r) requires additional considerations. The simplest approximation is to replace the charge array with a model of ideal (infinitesimally spaced) dipoles. In particular, as in the example above that uses a constant dipole moment density confined to a finite region, a surface charge and depolarization field results. A more general version of this model (which allows the polarization to vary with position) is the customary approach using electric susceptibility or electrical permittivity.

A more complex model of the point charge array introduces an effective medium by averaging the microscopic charges;[20] for example, the averaging can arrange that only dipole fields play a role.[28][29] A related approach is to divide the charges into those nearby the point of observation, and those far enough away to allow a multipole expansion. The nearby charges then give rise to local field effects.[18][30] In a common model of this type, the distant charges are treated as a homogeneous medium using a dielectric constant, and the nearby charges are treated only in a dipole approximation.[31] The approximation of a medium or an array of charges by only dipoles and their associated dipole moment density is sometimes called the point dipole approximation, the discrete dipole approximation, or simply the dipole approximation.[32][33][34]

Dipole moments of fundamental particles

Much experimental work is continuing on measuring the electric dipole moments (EDM) of fundamental and composite particles, namely those of the electron and neutron, respectively. As EDMs violate both the parity (P) and time-reversal (T) symmetries, their values yield a mostly model-independent measure of CP-violation in nature (assuming CPT symmetry is valid).[35] Therefore, values for these EDMs place strong constraints upon the scale of CP-violation that extensions to the standard model of particle physics may allow. Current generations of experiments are designed to be sensitive to the supersymmetry range of EDMs, providing complementary experiments to those done at the LHC.[36]

Indeed, many theories are inconsistent with the current limits and have effectively been ruled out, and established theory permits a much larger value than these limits, leading to the strong CP problem and prompting searches for new particles such as the axion.[37]

Dipole moments of molecules

Dipole moments in molecules are responsible for the behavior of a substance in the presence of external electric fields. The dipoles tend to be aligned to the external field which can be constant or time-dependent. This effect forms the basis of a modern experimental technique called dielectric spectroscopy.

Dipole moments can be found in common molecules such as water and also in biomolecules such as proteins.[38]

By means of the total dipole moment of some material one can compute the dielectric constant which is related to the more intuitive concept of conductivity. If \mathcal{M}_{\rm Tot} \, is the total dipole moment of the sample, then the dielectric constant is given by,

\epsilon = 1 + k \langle \mathcal{M}_{\rm Tot}^2 \rangle

where k is a constant and \langle \mathcal{M}_{\rm Tot}^2 \rangle = \langle \mathcal{M}_{\rm Tot} (t=0) \mathcal{M}_{\rm Tot}(t=0) \rangle is the time correlation function of the total dipole moment. In general the total dipole moment have contributions coming from translations and rotations of the molecules in the sample,

\mathcal{M}_{\rm Tot} = \mathcal{M}_{\rm Trans} + \mathcal{M}_{\rm Rot}.

Therefore, the dielectric constant (and the conductivity) has contributions from both terms. This approach can be generalized to compute the frequency dependent dielectric function.[39]

The dipole moment of a molecule can also be calculated based on the molecular structure using the concept of group contribution methods.[40]

See also

References and in-line notes

  1. ↑ Raymond A. Serway, John W. Jewett, Jr. (2009). Physics for Scientists and Engineers, Volume 2 (8th ed.). Cengage Learning. p. 756. ISBN 1439048398.
  2. ↑ Christopher J. Cramer (2004). Essentials of computational chemistry (2 ed.). Wiley. p. 307. ISBN 0-470-09182-7.
  3. ↑ David E Dugdale (1993). Essentials of Electromagnetism. Springer. pp. 80–81. ISBN 1-56396-253-5.
  4. ↑ Kikuji Hirose, Tomoya Ono, Yoshitaka Fujimoto (2005). First-principles calculations in real-space formalism. Imperial College Press. p. 18. ISBN 1-86094-512-0.
  5. ↑ Each succeeding term provides a more detailed view of the distribution of charge, and falls off more rapidly with distance. For example, the quadrupole moment is the basis for the next term: Q_{ij} = \int d^3 \mathbf{r}_0 \left( 3x_i x_j -r_0^2 \delta_{ij} \right) \rho( \mathbf{r}_0) \ , with r0 = (x1, x2, x3). See HW Wyld (1999). Mathematical Methods for Physics. Westview Press. p. 106. ISBN 0-7382-0125-1.
  6. 1 2 BB Laud (1987). Electromagnetics (2 ed.). New Age International. p. 25. ISBN 0-85226-499-2.
  7. ↑ Jie-Zhi Wu, Hui-Yang Ma, Ming-De Zhou (2006). "§2.3.1 Functionally Orthogonal Decomposition". Vorticity and vortex dynamics. Springer. pp. 36 ff. ISBN 3-540-29027-3.
  8. ↑ For example, one could place the boundary around the bound charges at infinity. Then φb falls off with distance from the bound charges. If an external field is present, and zero free charge, the field can be accounted for in the contribution of φf, which would arrange to satisfy the boundary conditions and Laplace's equation
    \nabla^2 \varphi_f = 0 \ .
  9. ↑ In principle, one could add the same arbitrary curl to both D and P, which would cancel out of the difference D − P. However, assuming D and P originate in a simple division of charges into free and bound, they a formally similar to electric fields and so have zero curl.
  10. ↑ This medium can be seen as an idealization growing from the multipole expansion of the potential of an arbitrarily complex charge distribution, truncation of the expansion, and the forcing of the truncated form to apply everywhere. The result is a hypothetical medium. See Jack Vanderlinde (2004). "§7.1 The electric field due to a polarized dielectric". Classical Electromagnetic Theory. Springer. ISBN 1-4020-2699-4.
  11. ↑ Uwe Krey, Anthony Owen (2007). Basic Theoretical Physics: A Concise Overview. Springer. pp. 138–143. ISBN 3-540-36804-3.
  12. ↑ T Tsang (1997). Classical Electrodynamics. World Scientific. p. 59. ISBN 981-02-3041-9.
  13. ↑ For example, for a system of ideal dipoles with dipole moment p confined within some closed surface, the dipole density p(r) is equal to p inside the surface, but is zero outside. That is, the dipole density includes a Heaviside step function locating the dipoles inside the surface.
  14. ↑ George E Owen (2003). Introduction to Electromagnetic Theory (republication of the 1963 Allyn & Bacon ed.). Courier Dover Publications. p. 80. ISBN 0-486-42830-3.
  15. ↑ Pierre-François Brevet (1997). Surface second harmonic generation. Presses polytechniques et universitaires romandes. p. 24. ISBN 2-88074-345-1.
  16. ↑ See Daniel A. Jelski, Thomas F. George (1999). Computational studies of new materials. World Scientific. p. 219. ISBN 981-02-3325-6. and EM Purcell & CR Pennypacker (1973). "Scattering and Absorption of Light by Nonspherical Dielectric Grains". Astrophysical Journal 186: 705–714. Bibcode:1973ApJ...186..705P. doi:10.1086/152538.
  17. ↑ A brute force evaluation of the integral can be done using a multipole expansion: \frac{1}{|\bold{r-r_0}|}  =  \sum_{\ell,\ m } \frac{4\pi}{2 \ell +1}• \frac {1}{r} \left({\frac {r_0}{r}}\right)^{\ell} • \ {Y^*}_{\ell}^m (\theta_0 , \ \phi_0) Y_{\ell}^m (\theta, \ \phi) . See HW Wyld (1999). Mathematical Methods for Physics. Westview Press. p. 104. ISBN 0-7382-0125-1.
  18. 1 2 H. Ibach, Hans Lüth (2003). Solid-state Physics: an introduction to principles of materials science (3 ed.). Springer. p. 361. ISBN 3-540-43870-X.
  19. ↑ Yasuaki Masumoto, Toshihide Takagahara (2002). Semiconductor quantum dots: physics, spectroscopy, and applications. Springer. p. 72. ISBN 3-540-42805-4.
  20. 1 2 Yutaka Toyozawa (2003). Optical processes in solids. Cambridge University Press. p. 96. ISBN 0-521-55605-8.
  21. ↑ For example, a droplet in a surrounding medium experiences a higher or a lower internal field depending upon whether the medium has a higher or a lower dielectric constant than that of the droplet. See Paul S. Drzaic (1995). Liquid crystal dispersions. World Scientific. p. 246. ISBN 981-02-1745-5.
  22. ↑ Wai-Kai Chen (2005). The electrical engineering handbook. Academic Press. p. 502. ISBN 0-12-170960-4.
  23. ↑ Julius Adams Stratton (2007). Electromagnetic theory (reprint of 1941 ed.). Wiley-IEEE. p. 184. ISBN 0-470-13153-5.
  24. ↑ Edward J. Rothwell, Michael J. Cloud (2001). Electromagnetics. CRC Press. p. 68. ISBN 0-8493-1397-X.
  25. ↑ Based upon equations from Andrew Gray (1888). The theory and practice of absolute measurements in electricity and magnetism. Macmillan & Co. pp. 126–127., which refers to papers by Sir W. Thomson.
  26. ↑ HW Wyld (1999). Mathematical Methods for Physics (2 ed.). Westview Press. pp. 233 ff. ISBN 0-7382-0125-1.
  27. ↑ Julius Adams Stratton (2007). Electromagnetic theory (Wiley-IEEE reissue ed.). Piscataway, NJ: IEEE Press. p. 205 ff. ISBN 0-470-13153-5.
  28. ↑ John E Swipe & RW Boyd (2002). "Nanocomposite materials for nonlinear optics based upon local field effects". In Vladimir M. Shalaev. Optical properties of nanostructured random media. Springer. p. 3. ISBN 3-540-42031-2.
  29. ↑ Emil Wolf (1977). Progress in Optics. Elsevier. p. 288. ISBN 0-7204-1515-2.
  30. ↑ Mark Fox (2006). Optical Properties of Solids. Oxford University Press. p. 39. ISBN 0-19-850612-0.
  31. ↑ Lev Kantorovich (2004). "§8.2.1 The local field". Quantum theory of the solid state. Springer. p. 426. ISBN 1-4020-2153-4.
  32. ↑ Pierre Meystre (2001). Atom Optics. Springer. p. 5. ISBN 0-387-95274-8.
  33. ↑ Bruce T Draine (2001). "The discrete dipole approximation for light scattering by irregular targets". In Michael I. Mishchenko. Light scattering by nonspherical particles. Academic Press. p. 132. ISBN 0-12-498660-9.
  34. ↑ MA Yurkin & AG Hoekstra (2007). "The discrete dipole approximation: an overview and recent developments". Journal of Quantitative Spectroscopy and Radiative Transfer 106 (1-3): 558–589. arXiv:0704.0038. Bibcode:2007JQSRT.106..558Y. doi:10.1016/j.jqsrt.2007.01.034.
  35. ↑ Khriplovich, Iosip B.; Lamoreaux, Steve K. (2012). CP violation without strangeness : electric dipole moments of particles, atoms, and molecules. [S.l.]: Springer. ISBN 978-3-642-64577-8.
  36. ↑ Ibrahim, Tarik; Itani, Ahmad; Nath, Pran (12 Aug 2014). "Electron EDM as a Sensitive Probe of PeV Scale Physics". arXiv: 1406.0083.
  37. ↑ Kim, Jihn E.; Carosi, Gianpaolo (4 March 2010). "Axions and the strong CP problem". Reviews of Modern Physics 82: 557. arXiv:0807.3125. Bibcode:2010RvMP...82..557K. doi:10.1103/RevModPhys.82.557.
  38. ↑ Ojeda, P., Garcia, M. (2010). "Electric Field-Driven Disruption of a Native beta-Sheet Protein Conformation and Generation of a Helix-Structure". Biophysical Journal 99 (2): 595–599. Bibcode:2010BpJ....99..595O. doi:10.1016/j.bpj.2010.04.040. PMC 2905109. PMID 20643079.
  39. ↑ Y. Shim and H. Kim (2008). "Dielectric Relaxation, Ion Conductivity, Solvent Rotation, and Solvation Dynamics in a Room-Temperature Ionic Liquid". J. Phys. Chem. B 112 (35): 11028–11038. doi:10.1021/jp802595r. PMID 18693693.
  40. ↑ K. Müller, L. Mokrushina and W. Arlt (2012). "Second-Order Group Contribution Method for the Determination of the Dipole Moment". J. Chem. Eng. Data 57 (4): 1231–1236. doi:10.1021/je2013395.

Further reading

External links

This article is issued from Wikipedia - version of the Thursday, January 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.