Economic order quantity

Economic order quantity (EOQ) is the order quantity that minimizes the total holding costs and ordering costs. It is one of the oldest classical production scheduling models. The framework used to determine this order quantity is also known as Wilson EOQ Model, Wilson Formula or Andler Formula. The model was developed by Ford W. Harris in 1913,[1] but R. H. Wilson, a consultant who applied it extensively, and K. Andler are given credit for their in-depth analysis.[2]

Overview

EOQ applies only when demand for a product is constant over the year and each new order is delivered in full when inventory reaches zero. There is a fixed cost for each order placed, regardless of the number of units ordered. There is also a cost for each unit held in storage, commonly known as holding cost, sometimes expressed as a percentage of the purchase cost of the item.

We want to determine the optimal number of units to order so that we minimize the total cost associated with the purchase, delivery and storage of the product.

The required parameters to the solution are the total demand for the year, the purchase cost for each item, the fixed cost to place the order and the storage cost for each item per year. Note that the number of times an order is placed will also affect the total cost, though this number can be determined from the other parameters.

Variables

The Total Cost function and derivation of EOQ formula

Classic EOQ model: trade-off between ordering cost (blue) and holding cost (red). Total cost (green) admits a global optimum. Purchase cost is not a relevant cost for determining the optimal order quantity.

The single-item EOQ formula finds the minimum point of the following cost function:

Total Cost = purchase cost or production cost + ordering cost + holding cost

Where:

TC = PD + {\frac{DK}{Q}} + {\frac{hQ}{2}}.

To determine the minimum point of the total cost curve, calculate the derivative of the total cost with respect to Q (assume all other variables are constant) and set it equal to 0:

{0} = -{\frac{DK}{Q^2}}+{\frac{h}{2}}

Solving for Q gives Q* (the optimal order quantity):

Q^{*2}={\frac{2DK}{h}}

Therefore:

Economic Order Quantity

Q^* = \sqrt{\frac{2DK}{h}}

Q* is independent of P; it is a function of only K, D, h.

The optimal value Q* may also be found by recognising that[3]

TC = {\frac{DK}{Q}} + {\frac{hQ}{2}} + PD ={\frac{h}{2Q}}(Q - \sqrt{2DK/h})^2 + \sqrt{2hDK} +PD, where the non-negative quadratic term disappears for Q = \sqrt{2DK/h}, which provides the cost minimum TC_{min} = \sqrt{2hDK} + PD.

Example

Economic order quantity = \sqrt{\frac{2D*K}{h}} = \sqrt{\frac{2*10000*2}{8*0.02}} = 500 units

Number of orders per year (based on EOQ) = {\frac{10000}{500}} = 20

Total cost = P*D + K (D/EOQ) + h (EOQ/2)

Total cost = 8*10000 + 2 (10000/500) + 0.16 (500/2) = $80080

If we check the total cost for any order quantity other than 500(=EOQ), we will see that the cost is higher. For instance, supposing 600 units per order, then

Total cost = 8*10000 + 2 (10000/600) + 0.16 (600/2) = $80081

Similarly, if we choose 300 for the order quantity then

Total cost = 8*10000 + 2 (10000/300) + 0.16 (300/2) = $80091

This illustrates that the economic order quantity is always in the best interests of the firm.

Quantity discounts

An important extension to the EOQ model of Wilson is to accommodate quantity discounts. There are two main types of quantity discounts: (1) all-units and (2) incremental.[4][5] Here is a numerical example:

Design of optimal quantity discount schedules

In presence of a strategic customer, who responds optimally to discount schedule, the design of optimal quantity discount scheme by the supplier is complex and has to be done carefully. This is particularly so when the demand at the customer is itself uncertain. An interesting effect called the "reverse bullwhip" takes place where an increase in consumer demand uncertainty actually reduces order quantity uncertainty at the supplier.[6]

Other extensions

Several extensions can be made to the EOQ model developed by Mr. Pankaj Mane, including backordering costs and multiple items. Additionally, the economic order interval can be determined from the EOQ and the economic production quantity model (which determines the optimal production quantity) can be determined in a similar fashion.

A version of the model, the Baumol-Tobin model, has also been used to determine the money demand function, where a person's holdings of money balances can be seen in a way parallel to a firm's holdings of inventory.[7]

Malakooti (2013)[8] has introduced the multi-criteria EOQ models where the criteria could be minimizing the total cost, Order quantity (inventory), and Shortages.

See also

References

  1. ↑ Harris, Ford W. (1990) [Reprint from 1913]. "How Many Parts to Make at Once" (PDF). Operations Research (INFORMS) 38 (6): 947–950. doi:10.1287/opre.38.6.947. JSTOR 170962. Retrieved Nov 21, 2012.
  2. ↑ Hax, AC and Candea, D. (1984), Production and Operations Management, Prentice-Hall, Englewood Cliffs, NJ, p. 135
  3. ↑ Grubbström, Robert W. (1995). "Modelling production opportunities — an historical overview". International Journal of Production Economics 41: 1–14. doi:10.1016/0925-5273(95)00109-3.
  4. ↑ Nahmias, Steven (2005). Production and operations analysis. McGraw Hill Higher Education.
  5. ↑ Zipkin, Paul H, Foundations of Inventory Management, McGraw Hill 2000
  6. ↑ Altintas, N.; Erhun, F.; Tayur, S. (2008). "Quantity Discounts Under Demand Uncertainty". Management Science 54 (4): 777–792. doi:10.1287/mnsc.1070.0829.
  7. ↑ Andrew Caplin and John Leahy, "Economic Theory and the World of Practice: A Celebration of the (S,s) Model", Journal of Economic Perspectives, Winter 2010, V 24, N 1
  8. ↑ Malakooti, B (2013). Operations and Production Systems with Multiple Objectives. John Wiley & Sons. ISBN 978-1-118-58537-5.

Further reading

External links

This article is issued from Wikipedia - version of the Sunday, January 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.