Drift pin

drift punch

In metalworking, a drift pin, drift pin punch, or simply drift, is the name for a tool used for enlarging holes, or aligning holes prior to bolting or riveting metal parts together. A drift pin is not used as a punch in the traditional sense of the term. A drift is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole. As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener. Unlike most punches, force should never be applied to the tip of drift pin.

Drift pins are especially useful for aligning fastener holes in structural steel members. Spud wrenches used for assembling trusses and steel beams have tapered handles to use as drift pins.

See also

References

    This article is issued from Wikipedia - version of the Friday, June 13, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.