Crown-Ikarus 286

Crown-Ikarus 286

TriMet #744, a 1982 Crown-Ikarus 286 in Portland, Oregon (1993 photograph)
Overview
Type transit bus
Manufacturer Ikarus Body and Coach Works
Crown Coach Corporation
Production 1980-1986
Assembly Budapest, Hungary (initial assembly)
Final Assembly: Los Angeles, California (final completion)
Body and chassis
Body style articulated bus
Layout Mid-mounted engine/"puller" (6x2)
Doors Two
Three
Floor type High floor
Chassis semi self-supporting with subframe
Related Orion-Ikarus 286/Orion III
Powertrain
Engine Cummins 855 cu in (14 L) NHHTC inline-6
Transmission 4-speed Allison HT740 automatic
Voith D864.2 automatic
Dimensions
Length 55 ft (17 m; 660 in)
60 ft (18 m; 720 in)

The Crown-Ikarus 286 is a type of transit bus that was manufactured for the U.S. market from 1980 until 1986, under a joint venture between the Ikarus Body and Coach Works (Ikarus), of Budapest, Hungary, and Crown Coach Corporation from Los Angeles, California in the United States. Loosely based on the Ikarus 280, the Crown-Ikarus 286 is a high-floor articulated bus. Due to their use in the United States, the Crown-Ikarus buses were the first buses equipped with a wheelchair lift that were produced by Ikarus.[1]

After a number of production problems arose,[2] the Crown-Ikarus 286 was withdrawn from the market in 1986, following the collapse of the joint venture.[3][4] A total of 243 examples were produced for nine different operators.

Background

In the late 1970s, the era of the "fishbowl" mass-transit buses in the United States and Canada was coming to a close; GM and Flxible ended US production of their "New Look" buses in 1977 and 1978, respectively. To gain a share in building the next generation of mass-transit buses, many manufacturers commenced design work for new vehicles. To diversify its business beyond the fragile school bus industry of the late 1970s, California-based Crown Coach sought to enter the mass-transit market. While its chief competitor Gillig Corporation began design work on what would become the Gillig Phantom, Crown Coach did not have the resources on its own to develop its own design from the ground up.

In 1979, the company developed a partnership with Hungarian bus manufacturer Ikarus Body and Coach Works. In addition for Crown to gain production of a mass-transit bus, the partnership allowed for Hungary to obtain much-desired hard currency and to ease a trade imbalance between Eastern Europe and the West.[2] At the time, Ikarus produced 13,000 transit buses annually,[1][2] triple the combined production of all US manufacturers, making it one of the largest bus manufacturers in the world[2] By partnering with Crown Coach, who built its school buses for a 20-year lifespan, the final assembly would be completed in the United States to much more stringent American standards. In addition, final assembly in California allowed the vehicles to be customized to American needs, such as the inclusion of wheelchair lifts for passengers with disabilities.[2]

Sales contracts were managed by Crown Coach, so as to make it easier to ensure that the work satisfied U.S. federal "Buy America" requirements[2] (49 U.S.C. § 5323j). All buses manufactured under the Crown-Ikarus name were considered model 286, although different orders carried a seldom-noted numerical suffix, for example Portland's being model 286.02.

Production History

View of left side and rear of a 60-foot Crown-Ikarus bus

The first order for the Crown-Ikarus was placed in November 1979.[5] In its Budapest factory, body shells of the Ikarus 280 were produced in a 102 in (2,591 mm) body width specific for the North American market. After the bodies were fabricated, the partially completed buses were shipped to the Crown Coach factory in Los Angeles for the fitment of the engine, transmission, axles, brakes, seats, and destination signs, among other items.[1] For the first vehicles, the engines and transmissions were shipped to Hungary for installation, but subsequent vehicles had the entire powertrain fitted at the Crown Coach factory.[5]

The Crown-Ikarus 286 was sold in 55-feet and 60-feet configurations with two or three doors. With the exception of the Houston METRO vehicles (five were fitted with 61 forward-facing seats), all vehicles were fitted with transit-style seats. In a 60-foot configuration, the passenger capacity was 73.[3]

Shared with the Crown Supercoach line, the 286 was fitted with a 350 hp Cummins NHHTC underfloor diesel. Most vehicles were fitted with an Allison HT740 automatic transmission, while a Voith D864.2 automatic transmission was fitted for several vehicles operated in Houston and in Milwaukee.[5] The axles were also U.S.-made.[6] In the mid- to late 1980s, Tri-Met replaced the Cummins engines in its Crown-Ikarus buses with Detroit Diesel DDA 6-71 engines, in an effort to improve reliability and reduce maintenance costs.[7]

Ikarus also hoped to sell a trolleybus version of the 286 in North America through Crown Coach.[8] With this in mind, an Ikarus 280T3 articulated trolleybus was transported to North America, and was demonstrated on the Mexico City[9] San Francisco,[10] and Seattle trolleybus systems.[11] from 1981 to 1982. Ultimately, no orders were received, and Crown Coach did not build any trolleybuses.

Post-production issues

Various problems were experienced with the completed buses during their use, including doors malfunctioning and windows coming out.[2] In Portland, Oregon, which had more Crown-Ikarus buses than any other transit system, owner Tri-Met found that its 87 buses needed numerous repairs and modifications, to fix what it considered to be significant defects.[12][13] The agency worked with the manufacturer to correct many of them, but carried out some of the repairs and modifications itself, sometimes at its own expense.[14] In 1985, when the buses involved were three to four years old, Tri-Met filed a lawsuit against the manufacturers, alleging breach of contract.[12] The suit identified 45 separate defects, including frame cracks, and charged that Crown Coach and Ikarus had been unable or unwilling to correct all of them.[12][13] Tri-Met officials said the problems and frequent breakdowns of the buses led to there being days when only about 50 of the 87 buses were operational.[13] According to Tri-Met, the issue was compounded by maintenance diagrams that were "written mostly in Hungarian".[13] The lawsuit was later postponed, as the parties hoped to settle their differences out of court,[15] and 17 months after the suit was filed, Tri-Met announced that a settlement had been reached.[14] The warranties on Tri-Met's buses, which had originally been for one to two years but been extended,[12] were now extended through 1992, but most other details of the 1987 settlement were not released publicly.[14]

By 1986, Crown Coach had already ceased taking orders for the Crown-Ikarus 286, and production under the joint venture ended.[3] Ikarus re-entered the U.S. market on its own in 1989 as Ikarus USA, which after a series of reorganizations became North American Bus Industries (NABI) in 1996.

Operators

Crown-Ikarus buses were sold new to a total of only nine transit systems, all located in the United States.

Operator Location Quantity Notes
TARC Louisville, Kentucky 15 Delivered in 1980, first Crown-Ikarus 286 buses sold.[3][5]
Tri-Met Portland, Oregon 87 Delivered from 1981 to mid-1982; the largest order of the 286

All had three doors; the rear door was fitted with a wheelchair lift.

Houston METRO Houston, Texas 50 Five fitted with forward-facing 61 "suburban" seats
MCTS Milwaukee, Wisconsin 40 Purchased in 1984, retired in 2000
SamTrans San Mateo County, California 10
Capital District Transportation Authority Albany, New York 8
Santa Clara County Transportation Agency San Jose, California 15 To AC Transit in 1988
TheBus Honululu, Hawaii 8
Jacksonville Transportation Authority (JTA) Jacksonville, Florida 10[3]
AC Transit Oakland, California N/A Leased 15 buses from Santa Clara County from 1988.[16]

See also

References

  1. 1 2 3 Bushell, Chris; and Stonham, Peter (eds.) (1986). Jane's Urban Transport Systems 1986, pp. 484–486. London: Jane's Publishing Company. ISBN 0-7106-0826-8.
  2. 1 2 3 4 5 6 7 Anders, George (March 28, 1984). "Soviet Bloc Bus Builder Hits Bumpy Road in U.S.". The Wall Street Journal (Eastern edition). p. 1.
  3. 1 2 3 4 5 Stauss, Ed (1988). The Bus World Encyclopedia of Buses. Stauss Publications. pp. 108–109. ISBN 978-0-9619830-0-0.
  4. "MBS Timeline: The 1980s". Motor Coach Today (Motor Bus Society). January–March 1998. p. 17.
  5. 1 2 3 4 Wilkins, Van (Spring 1986). "Success with a Twist" (feature article about the development and use of articulated buses in North America). Bus World magazine, pp. 7–13. ISSN 0162-9689.
  6. Federman, Stan (November 30, 1981). "Tri-Met readies bendable buses". The Oregonian (Portland, Oregon), p. B1.
  7. Wilkins, Van (Winter 1988–89). "MAX and His Buses: Portland integrates light rail into its bus system". Bus World magazine, pp. 8–12.
  8. Trolleybus Magazine No. 117 (March 1981), p. 47. National Trolleybus Association (UK). ISSN 0266-7452.
  9. Trolleybus Magazine No. 113 (July 1980), p. 95.
  10. Trolleybus Magazine No. 126 (September/November 1982), p. 127.
  11. Trolley Coach News No. 54 (Summer/Fall 1982), pp. 102–103. North American Trackless Trolley Association (defunct)
  12. 1 2 3 4 Federman, Stan (November 5, 1985). "Tri-Met sues over articulated bus defects". The Oregonian, p. B5.
  13. 1 2 3 4 Federman, Stan (November 5, 1985). "Diagrams frustrated Tri-Met mechanics". The Oregonian, p. B5.
  14. 1 2 3 Federman, Stan (April 3, 1987). "Pact may straighten out articulated-bus problems". The Oregonian, p. D2.
  15. Federman, Stan (February 13, 1986). "Settlement due on bus defects". The Oregonian, p. A17.
  16. Hardie, Patrick R. (July–August 1988). "AC Transit to Overhaul Route Structure". Motor Coach Age, p. 45.
This article is issued from Wikipedia - version of the Tuesday, December 01, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.