Coulomb explosion

Animation of Coulomb explosion of cluster of atoms ionized by the laser field. Hue level of color is proportional to (bigger) atoms charge. Electrons (smaller) on this time-scale are seen only stroboscopically and the hue level is their kinetic energy

A Coulomb explosion is a mechanism for coupling electronic excitation energy from intense electromagnetic fields into atomic motion. The Coulombic repulsion of particles having the same electric charge can break the bonds that hold solids together. When done with a narrow laser beam, a small amount of solid explodes into a plasma of ionized atomic particles.

With their low mass, outer valence electrons responsible for chemical bonding are easily stripped from atoms, leaving them positively charged. Given a mutually repulsive state between atoms whose chemical bonds are broken, the material explodes into a small plasma cloud of energetic ions with higher velocities than seen in thermal emission.[1]

A Coulomb explosion is one particular mechanism that permits laser-based machining.

Coulomb explosions for industrial machining are made with brief (picosecond or high femtoseconds) laser pulses. The enormous beam intensities required (10–400 terawatt per square centimeter thresholds, depending on material) are only practical to generate, shape, and deliver for very brief instants of time.

A Coulomb explosion is a "cold" alternative to the dominant laser etching technique of thermal ablation, which depends on local heating, melting, and vaporization of molecules and atoms using less-intense beams. Pulse brevity down only to the nanosecond regime is sufficient to localize thermal ablation – before the heat is conducted far, the energy input (pulse) has ended. Nevertheless, thermally ablated materials may seal pores important in catalysis or battery operation, and recrystallize or even burn the substrate, thus changing the physical and chemical properties at the etch site. In contrast, even light foams remain unsealed after ablation by Coulomb explosion.

Coulomb explosion etching can be used in any material to bore holes, remove surface layers, and texture and microstructure surfaces; e.g., to control ink loading in printing presses.[2]

High speed camera imaging of alkali metals exploding in water has suggested the explosion is a coulomb explosion.[3][4]

See also

References

  1. ↑ Hashida, M.; Mishima, H.; Tokita, S.; Sakabe, S. (2009). "Non-thermal ablation of expanded polytetrafluoroethylene with an intense femtosecond-pulse laser". Optics Express 17 (15): 13116–13121. Bibcode:2009OExpr..1713116H. doi:10.1364/OE.17.013116.
  2. ↑ Müller, D. (November 2009). "Picosecond Lasers for High-Quality Industrial Micromachining". Photonics Spectra: 46–47.
  3. ↑ "Coulomb explosion during the early stages of the reaction of alkali metals with water". Nature Chemistry. 26 Jan 2015. doi:10.1038/nchem.2161.
  4. ↑ "Sodium's Explosive Secrets Revealed". Scientific American. 27 Jan 2015.
This article is issued from Wikipedia - version of the Wednesday, April 15, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.