Connection form

In mathematics, and specifically differential geometry, a connection form is a manner of organizing the data of a connection using the language of moving frames and differential forms.

Historically, connection forms were introduced by Élie Cartan in the first half of the 20th century as part of, and one of the principal motivations for, his method of moving frames. The connection form generally depends on a choice of frame, and so is not a tensorial object. Various generalizations and reinterpretations of the connection form were formulated subsequent to Cartan's initial work. In particular, on a principal bundle, a principal connection is a natural reinterpretation of the connection form as a tensorial object. On the other hand, the connection form has the advantage that it is a differential form defined on the differentiable manifold, rather than on an abstract principal bundle over it. Hence, despite their lack of tensoriality, connection forms continue to be used because of the relative ease of performing calculations with them.[1] In physics, connection forms are also used broadly in the context of gauge theory, through the gauge covariant derivative.

A connection form associates to each basis of a vector bundle a matrix of differential forms. The connection form is not tensorial because under a change of basis, the connection form transforms in a manner that involves the exterior derivative of the transition functions, in much the same way as the Christoffel symbols for the Levi-Civita connection. The main tensorial invariant of a connection form is its curvature form. In the presence of a solder form identifying the vector bundle with the tangent bundle, there is an additional invariant: the torsion form. In many cases, connection forms are considered on vector bundles with additional structure: that of a fiber bundle with a structure group.

Vector bundles

Preliminaries

Frames on a vector bundle

Let E be a vector bundle of fibre dimension k over a differentiable manifold M. A local frame for E is an ordered basis of local sections of E.

Let e=(eα)α=1,2,...,k be a local frame on E. This frame can be used to express locally any section of E. For suppose that ξ is a local section, defined over the same open set as the frame e, then

\xi = \sum_{\alpha=1}^k e_\alpha \xi^\alpha(\mathbf e)

where ξα(e) denotes the components of ξ in the frame e. As a matrix equation, this reads

\xi = {\mathbf e} \begin{bmatrix} \xi^1(\mathbf e)\\ \xi^2(\mathbf e)\\ \vdots\\ \xi^k(\mathbf e) \end{bmatrix}= {\mathbf e}\, \xi(\mathbf e)

Exterior connections

A connection in E is a type of differential operator

D : \Gamma(E) \rightarrow \Gamma(E\otimes\Omega^1M)

where Γ denotes the sheaf of local sections of a vector bundle, and Ω1M is the bundle of differential 1-forms on M. For D to be a connection, it must be correctly coupled to the exterior derivative. Specifically, if v is a local section of E, and f is a smooth function, then

D(fv) = v\otimes (df) + fDv

where df is the exterior derivative of f.

Sometimes it is convenient to extend the definition of D to arbitrary E-valued forms, thus regarding it as a differential operator on the tensor product of E with the full exterior algebra of differential forms. Given an exterior connection D satisfying this compatibility property, there exists a unique extension of D:

D : \Gamma(E\otimes\Omega^*M) \rightarrow \Gamma(E\otimes\Omega^*M)

such that

D(v\wedge\alpha) = (Dv)\wedge\alpha + (-1)^{\text{deg}\, v}v\wedge d\alpha

where v is homogeneous of degree deg v. In other words, D is a derivation on the sheaf of graded modules Γ(E ⊗ Ω*M).

Connection forms

The connection form arises when applying the exterior connection to a particular frame e. Upon applying the exterior connection to the eα, it is the unique k × k matrix (ωαβ) of one-forms on M such that

D e_\alpha = \sum_{\beta=1}^k e_\beta\otimes\omega^\beta_\alpha.

In terms of the connection form, the exterior connection of any section of E can now be expressed, for suppose that ξ = Σα eαξα. Then

D\xi = \sum_{\alpha=1}^k D(e_\alpha\xi^\alpha(\mathbf e)) = \sum_{\alpha=1}^k e_\alpha\otimes d\xi^\alpha(\mathbf e) + \sum_{\alpha=1}^k\sum_{\beta=1}^k e_\beta\otimes\omega^\beta_\alpha \xi^\alpha(\mathbf e).

Taking components on both sides,

D\xi(\mathbf e) = d\xi(\mathbf e)+\omega \xi(\mathbf e) = (d+\omega)\xi(\mathbf e)

where it is understood that d and ω refer to the exterior derivative and a matrix of 1-forms, respectively, acting on the components of ξ. Conversely, a matrix of 1-forms ω is a priori sufficient to completely determine the connection locally on the open set over which the basis of sections e is defined.

Change of frame

In order to extend ω to a suitable global object, it is necessary to examine how it behaves when a different choice of basic sections of E is chosen. Write ωαβ = ωαβ(e) to indicate the dependence on the choice of e.

Suppose that e′ is a different choice of local basis. Then there is an invertible k × k matrix of functions g such that

{\mathbf e}' = {\mathbf e}\, g,\quad \text{i.e., }\,e'_\alpha = \sum_\beta e_\beta g^\beta_\alpha.

Applying the exterior connection to both sides gives the transformation law for ω:

\omega(\mathbf e\, g) = g^{-1}dg+g^{-1}\omega(\mathbf e)g.

Note in particular that ω fails to transform in a tensorial manner, since the rule for passing from one frame to another involves the derivatives of the transition matrix g.

Global connection forms

If {Up} is an open covering of M, and each Up is equipped with a trivialization ep of E, then it is possible to define a global connection form in terms of the patching data between the local connection forms on the overlap regions. In detail, a connection form on M is a system of matrices ω(ep) of 1-forms defined on each Up that satisfy the following compatibility condition

\omega(\mathbf e_q) = (\mathbf e_p^{-1}\mathbf e_q)^{-1}d(\mathbf e_p^{-1}\mathbf e_q)+(\mathbf e_p^{-1}\mathbf e_q)^{-1}\omega(\mathbf e_p)(\mathbf e_p^{-1}\mathbf e_q).

This compatibility condition ensures in particular that the exterior connection of a section of E, when regarded abstractly as a section of E ⊗ Ω1M, does not depend on the choice of basis section used to define the connection.

Curvature

The curvature two-form of a connection form in E is defined by

\Omega(\mathbf e) = d\omega(\mathbf e) + \omega(\mathbf e)\wedge\omega(\mathbf e).

Unlike the connection form, the curvature behaves tensorially under a change of frame, which can be checked directly by using the Poincaré lemma. Specifically, if e → e g is a change of frame, then the curvature two-form transforms by

\Omega(\mathbf e\, g) = g^{-1}\Omega(\mathbf e)g.

One interpretation of this transformation law is as follows. Let e* be the dual basis corresponding to the frame e. Then the 2-form

\Omega={\mathbf e}\Omega(\mathbf e){\mathbf e}^*

is independent of the choice of frame. In particular, Ω is a vector-valued two-form on M with values in the endomorphism ring Hom(E,E). Symbolically,

\Omega\in \Gamma(\Omega^2M\otimes \text{Hom}(E,E)).

In terms of the exterior connection D, the curvature endomorphism is given by

\Omega(v) = D(D v) = D^2v\,

for v ∈ E. Thus the curvature measures the failure of the sequence

\Gamma(E)\ \stackrel{D}{\to}\ \Gamma(E\otimes\Omega^1M)\ \stackrel{D}{\to}\ \Gamma(E\otimes\Omega^2M)\ \stackrel{D}{\to}\ \dots\ \stackrel{D}{\to}\ \Gamma(E\otimes\Omega^n(M))

to be a chain complex (in the sense of de Rham cohomology).

Soldering and torsion

Suppose that the fibre dimension k of E is equal to the dimension of the manifold M. In this case, the vector bundle E is sometimes equipped with an additional piece of data besides its connection: a solder form. A solder form is a globally defined vector-valued one-form θ ∈ Γ(Ω1(M,E)) such that the mapping

\theta_x : T_xM \rightarrow E_x

is a linear isomorphism for all x ∈ M. If a solder form is given, then it is possible to define the torsion of the connection (in terms of the exterior connection) as

\Theta = D\theta.\,

The torsion Θ is an E-valued 2-form on M.

A solder form and the associated torsion may both be described in terms of a local frame e of E. If θ is a solder form, then it decomposes into the frame components

\theta = \sum_i \theta^i(\mathbf e) e_i.

The components of the torsion are then

\Theta^i(\mathbf e) = d\theta^i(\mathbf e) + \sum_j \omega_j^i(\mathbf e)\wedge \theta^j(\mathbf e).

Much like the curvature, it can be shown that Θ behaves as a contravariant tensor under a change in frame:

\Theta^i(\mathbf e\, g)=\sum_j g_j^i \Theta^j(\mathbf e).

The frame-independent torsion may also be recovered from the frame components:

\Theta = \sum_i e_i \Theta^i(\mathbf e).

Example: The Levi-Civita connection

As an example, suppose that M carries a Riemannian metric, and consider the Levi-Civita connection on the tangent bundle of M.[2] A local frame on the tangent bundle is an ordered list of vector fields e = (ei | i = 1,2,...,n=dim M) defined on an open subset of M that are linearly independent at every point of their domain. The Christoffel symbols define the Levi-Civita connection by

\nabla_{e_i}e_j = \sum_{k=1}^n\Gamma_{ij}^k(\mathbf e)e_k.

If θ = (θi | i=1,2,...,n), denotes the dual basis of the cotangent bundle, such that θi(ej) = δij (the Kronecker delta), then the connection form is

\omega_i^j(\mathbf e) = \sum_k \Gamma_{ki}^j(\mathbf e)\theta^k.

In terms of the connection form, the exterior connection on a vector field v = Σieivi is given by

Dv=\sum_k e_k\otimes(dv^k) + \sum_{j,k}e_k\otimes\omega^k_j(\mathbf e)v^j.

One can recover the Levi-Civita connection, in the usual sense, from this by contracting with ei:

\nabla_{e_i} v = \langle Dv, e_i\rangle = \sum_k e_k \left(\nabla_{e_i} v^k + \Sigma_j\Gamma^k_{ij}(\mathbf e)v^j\right)

Curvature

The curvature 2-form of the Levi-Civita connection is the matrix (Ωij) given by

\Omega_i^j(\mathbf e) = d\omega_i^j(\mathbf e)+\sum_k\omega_k^j(\mathbf e)\wedge\omega_i^k(\mathbf e).

For simplicity, suppose that the frame e is holonomic, so that dθi=0.[3] Then, employing now the summation convention on repeated indices,

\begin{array}{ll} \Omega_i^j &= d(\Gamma^j_{qi}\theta^q) + (\Gamma^j_{pk}\theta^p)\wedge(\Gamma^k_{qi}\theta^q)\\ &\\ &=\theta^p\wedge\theta^q\left(\partial_p\Gamma^j_{qi}+\Gamma^j_{pk}\Gamma^k_{qi})\right)\\ &\\ &=\tfrac12\theta^p\wedge\theta^q R_{pqi}{}^j \end{array}

where R is the Riemann curvature tensor.

Torsion

The Levi-Civita connection is characterized as the unique metric connection in the tangent bundle with zero torsion. To describe the torsion, note that the vector bundle E is the tangent bundle. This carries a canonical solder form (sometimes called the canonical one-form) that is the section θ of Hom(TM,TM) = T*M ⊗ TM corresponding to the identity endomorphism of the tangent spaces. In the frame e, the solder form is θ = Σi ei ⊗ θi, where again θi is the dual basis.

The torsion of the connection is given by Θ = D θ, or in terms of the frame components of the solder form by

\Theta^i(\mathbf e) = d\theta^i+\sum_j\omega^i_j(\mathbf e)\wedge\theta^j.

Assuming again for simplicity that e is holonomic, this expression reduces to

\Theta^i = \Gamma^i_{kj} \theta^k\wedge\theta^j,

which vanishes if and only if Γikj is symmetric on its lower indices.

Structure groups

A more specific type of connection form can be constructed when the vector bundle E carries a structure group. This amounts to a preferred class of frames e on E, which are related by a Lie group G. For example, in the presence of a metric in E, one works with frames that form an orthonormal basis at each point. The structure group is then the orthogonal group, since this group preserves the orthonormality of frames. Other examples include:

In general, let E be a given vector bundle of fibre dimension k and G ⊂ GL(k) a given Lie subgroup of the general linear group of Rk. If (eα) is a local frame of E, then a matrix-valued function (gij): M → G may act on the eα to produce a new frame

e_\alpha' = \sum_\beta e_\beta g_\alpha^\beta.

Two such frames are G-related. Informally, the vector bundle E has the structure of a G-bundle if a preferred class of frames is specified, all of which are locally G-related to each other. In formal terms, E is a fibre bundle with structure group G whose typical fibre is Rk with the natural action of G as a subgroup of GL(k).

Compatible connections

A connection is compatible with the structure of a G-bundle on E provided that the associated parallel transport maps always send one G-frame to another. Formally, along a curve γ, the following must hold locally (that is, for sufficiently small values of t):

\Gamma(\gamma)_0^t e_\alpha(\gamma(0)) = \sum_\beta e_\beta(\gamma(t))g_\alpha^\beta(t)

for some matrix gαβ (which may also depend on t). Differentiation at t=0 gives

\nabla_{\dot{\gamma}(0)} e_\alpha = \sum_\beta e_\beta \omega_\alpha^\beta(\dot{\gamma}(0))

where the coefficients ωαβ are in the Lie algebra g of the Lie group G.

With this observation, the connection form ωαβ defined by

D e_\alpha = \sum_\beta e_\beta\otimes \omega_\alpha^\beta(\mathbf e)

is compatible with the structure if the matrix of one-forms ωαβ(e) takes its values in g.

The curvature form of a compatible connection is, moreover, a g-valued two-form.

Change of frame

Under a change of frame

e_\alpha' = \sum_\beta e_\beta g_\alpha^\beta

where g is a G-valued function defined on an open subset of M, the connection form transforms via

\omega_\alpha^\beta(\mathbf e\cdot g) = (g^{-1})_\gamma^\beta dg_\alpha^\gamma + (g^{-1})_\gamma^\beta \omega_\delta^\gamma(\mathbf e)g_\alpha^\delta.

Or, using matrix products:

\omega({\mathbf e}\cdot g) = g^{-1}dg + g^{-1}\omega g.

To interpret each of these terms, recall that g : M → G is a G-valued (locally defined) function. With this in mind,

\omega({\mathbf e}\cdot g) = g^*\omega_{\mathfrak g} + \text{Ad}_{g^{-1}}\omega(\mathbf e)

where ωg is the Maurer-Cartan form for the group G, here pulled back to M along the function g, and Ad is the adjoint representation of G on its Lie algebra.

Principal bundles

The connection form, as introduced thus far, depends on a particular choice of frame. In the first definition, the frame is just a local basis of sections. To each frame, a connection form is given with a transformation law for passing from one frame to another. In the second definition, the frames themselves carry some additional structure provided by a Lie group, and changes of frame are constrained to those that take their values in it. The language of principal bundles, pioneered by Charles Ehresmann in the 1940s, provides a manner of organizing these many connection forms and the transformation laws connecting them into a single intrinsic form with a single rule for transformation. The disadvantage to this approach is that the forms are no longer defined on the manifold itself, but rather on a larger principal bundle.

The principal connection for a connection form

Suppose that E → M is a vector bundle with structure group G. Let {U} be an open cover of M, along with G-frames on each U, denoted by eU. These are related on the intersections of overlapping open sets by

{\mathbf e}_V={\mathbf e}_U\cdot h_{UV}

for some G-valued function hUV defined on U ∩ V.

Let FGE be the set of all G-frames taken over each point of M. This is a principal G-bundle over M. In detail, using the fact that the G-frames are all G-related, FGE can be realized in terms of gluing data among the sets of the open cover:

F_GE = \left.\coprod_U U\times G\right/\sim

where the equivalence relation \sim is defined by

((x,g_U)\in U\times G) \sim ((x,g_V) \in V\times G) \iff {\mathbf e}_V={\mathbf e}_U\cdot h_{UV} \text{ and } g_U = h_{UV}^{-1}(x) g_V.

On FGE, define a principal G-connection as follows, by specifying a g-valued one-form on each product U × G, which respects the equivalence relation on the overlap regions. First let

\pi_1:U\times G \to U,\quad \pi_2 : U\times G \to G

be the projection maps. Now, for a point (x,g) ∈ U × G, set

\omega_{(x,g)} = Ad_{g^{-1}}\pi_1^*\omega(\mathbf e_U)+\pi_2^*\omega_{\mathbf g}.

The 1-form ω constructed in this way respects the transitions between overlapping sets, and therefore descends to give a globally defined 1-form on the principal bundle FGE. It can be shown that ω is a principal connection in the sense that it reproduces the generators of the right G action on FGE, and equivariantly intertwines the right action on T(FGE) with the adjoint representation of G.

Connection forms associated to a principal connection

Conversely, a principal G-connection ω in a principal G-bundle P→M gives rise to a collection of connection forms on M. Suppose that e : M → P is a local section of P. Then the pullback of ω along e defines a g-valued one-form on M:

\omega({\mathbf e}) = {\mathbf e}^*\omega.

Changing frames by a G-valued function g, one sees that ω(e) transforms in the required manner by using the Leibniz rule, and the adjunction:

\langle X, ({\mathbf e}\cdot g)^*\omega\rangle = \langle [d(\mathbf e\cdot g)](X), \omega\rangle

where X is a vector on M, and d denotes the pushforward.

See also

Notes

  1. ↑ Griffiths & Harris (1978), Wells (1980), Spivak (1999)
  2. ↑ See Spivak (1999), II.7 for a complete account of the Levi-Civita connection from this point of view.
  3. ↑ In a non-holonomic frame, the expression of curvature is further complicated by the fact that the derivatives dθi must be taken into account.
  4. ↑ Wells (1973).
  5. ↑ See for instance Kobayashi and Nomizu, Volume II.
  6. ↑ Wells, ibid.
  7. ↑ See Chern and Moser.

References

This article is issued from Wikipedia - version of the Sunday, January 31, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.