Conductive polymer

This article is about bulk applications of conductive polymers. For single-molecule electronics, see Molecular scale electronics.
Chemical structures of some conductive polymers. From top left clockwise: polyacetylene; polyphenylene vinylene; polypyrrole (X = NH) and polythiophene (X = S); and polyaniline (X = NH/N) and polyphenylene sulfide (X = S).

Conductive polymers or, more precisely, intrinsically conducting polymers (ICPs) are organic polymers that conduct electricity.[1] Such compounds may have metallic conductivity or can be semiconductors. The biggest advantage of conductive polymers is their processability, mainly by dispersion. Conductive polymers are generally not thermoplastics, i.e., they are not thermoformable. But, like insulating polymers, they are organic materials. They can offer high electrical conductivity but do not show similar mechanical properties to other commercially available polymers. The electrical properties can be fine-tuned using the methods of organic synthesis[2] and by advanced dispersion techniques.[3]

History

Polyaniline was first described in the mid-19th century by Henry Letheby, who investigated the electrochemical and chemical oxidation products of aniline in acidic media. He noted that reduced form was colourless but the oxidized forms were deep blue.[4]

The first highly-conductive organic compounds were the charge transfer complexes.[5] In the 1950s, researchers reported that polycyclic aromatic compounds formed semi-conducting charge-transfer complex salts with halogens.[2] In 1954, researchers at Bell Labs and elsewhere reported organic charge transfer complexes with resistivities as low as 8 ohms-cm.[6][7] In the early 1970s, researchers demonstrated salts of tetrathiafulvalene show[8] almost metallic conductivity, while superconductivity was demonstrated in 1980. Broad research on charge transfer salts continues today. While these compounds were technically not polymers, this indicated that organic compounds can carry current. While organic conductors were previously intermittently discussed, the field was particularly energized by the prediction of superconductivity[9] following the discovery of BCS theory.

In 1963 Australians B.A. Bolto, D.E. Weiss, and coworkers reported derivatives of polypyrrole with resistivities as low as 1 ohm·cm.[10][11] cites multiple reports of similar high-conductivity oxidized polyacetylenes. With the notable exception of charge transfer complexes (some of which are even superconductors), organic molecules were previously considered insulators or at best weakly conducting semiconductors. Subsequently, DeSurville and coworkers reported high conductivity in a polyaniline.[12] Likewise, in 1980, Diaz and Logan reported films of polyaniline that can serve as electrodes.[13]

While mostly operating in the quantum realm of less than 100 nanometers, "molecular" electronic processes can collectively manifest on a macro scale. Examples include quantum tunneling, negative resistance, phonon-assisted hopping and polarons. In 1977, Alan J. Heeger, Alan MacDiarmid and Hideki Shirakawa reported similar high conductivity in oxidized iodine-doped polyacetylene.[14] For this research, they were awarded the 2000 Nobel Prize in Chemistry "for the discovery and development of conductive polymers."[15] Polyacetylene itself did not find practical applications, but drew the attention of scientists and encouraged the rapid growth of the field.[4] Since the late 1980s, organic light-emitting diodes (OLEDs) have emerged as an important application of conducting polymers.[16][17]

Types

The linear-backbone "polymer blacks" (polyacetylene, polypyrrole, and polyaniline) and their copolymers are the main class of conductive polymers. Poly(p-phenylene vinylene) (PPV) and its soluble derivatives have emerged as the prototypical electroluminescent semiconducting polymers. Today, poly(3-alkylthiophenes) are the archetypical materials for solar cells and transistors.[2]

The following table presents some organic conductive polymers according to their composition. The well-studied classes are written in bold and the less well studied ones are in italic.

The main chain contains Heteroatoms present
No heteroatom Nitrogen-containing Sulfur-containing
Aromatic cycles The N is in the aromatic cycle:

The N is outside the aromatic cycle:

 The S is in the aromatic cycle:

The S is outside the aromatic cycle:

Double bonds
Aromatic cycles and double bonds

Synthesis

Conductive polymers are prepared by many methods. Most conductive polymers are prepared by oxidative coupling of monocyclic precursors. Such reactions entail dehydrogenation:

n H–[X]–H → H–[X]n–H + 2(n–1) H+ + 2(n–1) e−

The low solubility of most polymers presents challenges. Some researchers have addressed this through the formation of nanostructures and surfactant-stabilized conducting polymer dispersions in water. These include polyaniline nanofibers and PEDOT:PSS. These materials have lower molecular weights than that of some materials previously explored in the literature. However, in some cases, the molecular weight need not be high to achieve the desired properties.

Molecular basis of electrical conductivity

The conductivity of such polymers is the result of several processes. For example, in traditional polymers such as polyethylenes, the valence electrons are bound in sp3 hybridized covalent bonds. Such "sigma-bonding electrons" have low mobility and do not contribute to the electrical conductivity of the material. However, in conjugated materials, the situation is completely different. Conducting polymers have backbones of contiguous sp2 hybridized carbon centers. One valence electron on each center resides in a pz orbital, which is orthogonal to the other three sigma-bonds. All the pz orbitals combine with each other to a molecule wide delocalized set of orbitals. The electrons in these delocalized orbitals have high mobility when the material is "doped" by oxidation, which removes some of these delocalized electrons. Thus, the conjugated p-orbitals form a one-dimensional electronic band, and the electrons within this band become mobile when it is partially emptied. The band structures of conductive polymers can easily be calculated with a tight binding model. In principle, these same materials can be doped by reduction, which adds electrons to an otherwise unfilled band. In practice, most organic conductors are doped oxidatively to give p-type materials. The redox doping of organic conductors is analogous to the doping of silicon semiconductors, whereby a small fraction silicon atoms are replaced by electron-rich, e.g., phosphorus, or electron-poor, e.g., boron, atoms to create n-type and p-type semiconductors, respectively.

Although typically "doping" conductive polymers involves oxidizing or reducing the material, conductive organic polymers associated with a protic solvent may also be "self-doped."

Undoped conjugated polymers state are semiconductors or insulators. In such compounds, the energy gap can be > 2 eV, which is too great for thermally activated conduction. Therefore, undoped conjugated polymers, such as polythiophenes, polyacetylenes only have a low electrical conductivity of around 10−10 to 10−8 S/cm. Even at a very low level of doping (< 1%), electrical conductivity increases several orders of magnitude up to values of around 0.1 S/cm. Subsequent doping of the conducting polymers will result in a saturation of the conductivity at values around 0.1–10 kS/cm for different polymers. Highest values reported up to now are for the conductivity of stretch oriented polyacetylene with confirmed values of about 80 kS/cm.[16][18][19][20][21][22] Although the pi-electrons in polyactetylene are delocalized along the chain, pristine polyacetylene is not a metal. Polyacetylene has alternating single and double bonds which have lengths of 1.44 and 1.36 Å, respectively.[23] Upon doping, the bond alteration is diminished in conductivity increases. Non-doping increases in conductivity can also be accomplished in a field effect transistor (organic FET or OFET) and by irradiation. Some materials also exhibit negative differential resistance and voltage-controlled "switching" analogous to that seen in inorganic amorphous semiconductors.

Despite intensive research, the relationship between morphology, chain structure and conductivity is still poorly understood.[24] Generally, it is assumed that conductivity should be higher for the higher degree of crystallinity and better alignment of the chains, however this could not be confirmed for polyaniline and was only recently confirmed for PEDOT,[25][26] which are largely amorphous.

Properties and applications

Due to their poor processability, conductive polymers have few large-scale applications. They have promise in antistatic materials[2] and they have been incorporated into commercial displays and batteries, but there have had limitations due to the manufacturing costs, material inconsistencies, toxicity, poor solubility in solvents, and inability to directly melt process. Literature suggests they are also promising in organic solar cells, printing electronic circuits, organic light-emitting diodes, actuators, electrochromism, supercapacitors, chemical sensors and biosensors,[27] flexible transparent displays, electromagnetic shielding and possibly replacement for the popular transparent conductor indium tin oxide.[28] Another use is for microwave-absorbent coatings, particularly radar-absorptive coatings on stealth aircraft. Conducting polymers are rapidly gaining attraction in new applications with increasingly processable materials with better electrical and physical properties and lower costs. The new nanostructured forms of conducting polymers particularly, augment this field with their higher surface area and better dispersability.

With the availability of stable and reproducible dispersions, PEDOT and polyaniline have gained some large scale applications. While PEDOT (poly(3,4-ethylenedioxythiophene)) is mainly used in antistatic applications and as a transparent conductive layer in form of PEDOT:PSS dispersions (PSS=polystyrene sulfonic acid), polyaniline is widely used for printed circuit board manufacturing – in the final finish, for protecting copper from corrosion and preventing its solderability.[3]

Electroluminescence

Electroluminescence is light emission stimulated by electric current. In organic compounds, electroluminescence has been known since the early 1950s, when Bernanose and coworkers first produced electroluminescence in crystalline thin films of acridine orange and quinacrine. In 1960, researchers at Dow Chemical developed AC-driven electroluminescent cells using doping. In some cases, similar light emission is observed when a voltage is applied to a thin layer of a conductive organic polymer film. While electroluminescence was originally mostly of academic interest, the increased conductivity of modern conductive polymers means enough power can be put through the device at low voltages to generate practical amounts of light. This property has led to the development of flat panel displays using organic LEDs, solar panels, and optical amplifiers.

Barriers to applications

Since most conductive polymers require oxidative doping, the properties of the resulting state are crucial. Such materials are salt-like (polymer salt), which diminishes their solubility in organic solvents and water and hence their processability. Furthermore, the charged organic backbone is often unstable towards atmospheric moisture. The poor processability for many polymers requires the introduction of solubilizing or substituents, which can further complicate the synthesis.

Experimental and theoretical thermodynamical evidence suggests that conductive polymers may even be completely and principally insoluble so that they can only be processed by dispersion.[29]

Trends

Most recent emphasis is on organic light emitting diodes and organic polymer solar cells.[30] The Organic Electronics Association is an international platform to promote applications of organic semiconductors.[31] Conductive polymer products with embedded and improved electromagnetic interference (EMI) and electrostatic discharge (ESD) protection have led to both prototypes and products. For example, Polymer Electronics Research Center at University of Auckland is developing a range of novel DNA sensor technologies based on conducting polymers, photoluminescent polymers and inorganic nanocrystals (quantum dots) for simple, rapid and sensitive gene detection. Typical conductive polymers must be "doped" to produce high conductivity. As of 2001, there remains to be discovered an organic polymer that is intrinsically electrically conducting.[32]

See also

References

  1. ↑ Inzelt, György (2008). "Chapter 1: Introduction". In Scholz, F. Conducting Polymers: A New Era in Electrochemistry. Monographs in Electrochemistry. Springer. pp. 1–6. ISBN 978-3-540-75929-4.
  2. 1 2 3 4 Naarmann, Herbert (2000). "Ullmann's Encyclopedia of Industrial Chemistry". doi:10.1002/14356007.a21_429. ISBN 3527306730. |chapter= ignored (help)
  3. 1 2 Handbook of Nanostructured Materials and Nanotechnology; Nalwa, H.S., Ed.; Academic Press: New York, NY, USA, 2000; Volume 5, pp. 501–575.
  4. 1 2 Inzelt, György (2008). "Chapter 8: Historical Background (Or: There Is Nothing New Under the Sun)". In Scholz, F. Conducting Polymers: A New Era in Electrochemistry. Monographs in Electrochemistry. Springer. pp. 265–267. ISBN 978-3-540-75929-4.
  5. ↑ Hush, Noel S. (2003). "An Overview of the First Half-Century of Molecular Electronics". Annals of the New York Academy of Sciences 1006: 1–20. Bibcode:2003NYASA1006....1H. doi:10.1196/annals.1292.016. PMID 14976006.
  6. ↑ Y. Okamoto and W. Brenner Organic Semiconductors, Rheinhold (1964)
  7. ↑ Akamatu, Hideo; Inokuchi, Hiroo; Matsunaga, Yoshio (1954). "Electrical Conductivity of the Perylene–Bromine Complex". Nature 173 (4395): 168–169. Bibcode:1954Natur.173..168A. doi:10.1038/173168a0.
  8. ↑ Ferraris, JohnS; Cowan, D. O.; Walatka, V.; Perlstein, J. H. (1973). "Electron transfer in a new highly conducting donor-acceptor complex". Journal of the American Chemical Society 95 (3): 948–949. doi:10.1021/ja00784a066.
  9. ↑ Little, W. A. (1964). "Possibility of Synthesizing an Organic Superconductor". Physical Review 134 (6A): A1416. Bibcode:1964PhRv..134.1416L. doi:10.1103/PhysRev.134.A1416.
  10. ↑ B.A. Bolto, R. McNeill and D.E. Weiss "Electronic Conduction in Polymers. III. Electronic Properties of Polypyrrole" Australian Journal of Chemistry 16(6) 1090, 1963.
  11. ↑ Organic Semiconductors by Yoshikuko Okamoto and Walter Brenner, Reinhold (1964). Chapt.7, Polymers, pp125-158
  12. ↑ De Surville, R.; Jozefowicz, M.; Yu, L.T.; Pepichon, J.; Buvet, R. (1968). "Electrochemical chains using protolytic organic semiconductors". Electrochimica Acta 13 (6): 1451–1458. doi:10.1016/0013-4686(68)80071-4.
  13. ↑ Diaz, A; Logan, J (1980). "Electroactive polyaniline films". Journal of Electroanalytical Chemistry 111: 111–114. doi:10.1016/S0022-0728(80)80081-7.
  14. ↑ Shirakawa, Hideki; Louis, Edwin J.; MacDiarmid, Alan G.; Chiang, Chwan K.; Heeger, Alan J. (1977). "Synthesis of electrically conducting organic polymers: Halogen derivatives of polyacetylene, (CH) x". Journal of the Chemical Society, Chemical Communications (16): 578. doi:10.1039/C39770000578.
  15. ↑ "The Nobel Prize in Chemistry 2000". Retrieved 2009-06-02.
  16. 1 2 Burroughes, J. H.; Bradley, D. D. C.; Brown, A. R.; Marks, R. N.; MacKay, K.; Friend, R. H.; Burns, P. L.; Holmes, A. B. (1990). "Light-emitting diodes based on conjugated polymers". Nature 347 (6293): 539–541. Bibcode:1990Natur.347..539B. doi:10.1038/347539a0.
  17. ↑ R. H. Friend; R. W. Gymer; A. B. Holmes; J. H. Burroughes; R. N. Marks; C. Taliani; D. D. C. Bradley; D. A. Dos Santos; J. L. Brédas; M. Lögdlund; W. R. Salaneck (1999). "Electroluminescence in conjugated polymers". Nature 397 (6715): 121–128. Bibcode:1999Natur.397..121F. doi:10.1038/16393.
  18. ↑ Heeger, A. J.; Schrieffer, J. R.; Su, W. -P.; Su, W. (1988). "Solitons in conducting polymers". Reviews of Modern Physics 60 (3): 781–850. Bibcode:1988RvMP...60..781H. doi:10.1103/RevModPhys.60.781.
  19. ↑ Heeger, A. J., Nature of the primary photo-excitations in poly(arylene-vinylenes): Bound neutral excitons or charged polaron pairs, in Primary photoexcitations in conjugated polymers: Molecular excitons versus semiconductor band model, Sariciftci, N. S., Ed., World Scientific, Singapore, 1997. Handbook of Organic Conductive Molecules and Polymers; Vol. 1–4, edited by H.S. Nalwa (John Wiley & Sons Ltd., Chichester, 1997).
  20. ↑ Handbook of Conducting Polymers; Vol.1,2, edited by T.A. Skotheim, R.L. Elsenbaumer, and J.R. Reynolds (Marcel Dekker, Inc., New York, 1998). Semiconducting Polymers; Vol., edited by G. Hadziioannou and P.F.v. Hutten (Wiley-VCH, Weinheim, 2007)
  21. ↑ Sariciftci, N. S.; Smilowitz, L.; Heeger, A. J.; Wudl, F. (1992). "Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene". Science 258 (5087): 1474–6. Bibcode:1992Sci...258.1474S. doi:10.1126/science.258.5087.1474. PMID 17755110.
  22. ↑ Sirringhaus, H. (2005). "Device Physics of Solution-Processed Organic Field-Effect Transistors". Advanced Materials 17 (20): 2411–2425. doi:10.1002/adma.200501152.
  23. ↑ Yannoni, C. S.; Clarke, T. C. (1983). "Molecular Geometry of cis- and trans-Polyacetylene by Nutation NMR Spectroscopy". Physical Review Letters 51 (13): 1191–1193. Bibcode:1983PhRvL..51.1191Y. doi:10.1103/PhysRevLett.51.1191.
  24. ↑ Skotheim, T., Elsenbaumer, R., Reynolds, J., Eds.; Handbook of Conducting Polymers, 2nd ed.; Marcel Dekker, Inc.: New York, NY, USA, 1998
  25. ↑ Vijay, Venugopalan; Rao, Arun D.; Narayan, K. S. (2011). "In situ studies of strain dependent transport properties of conducting polymers on elastomeric substrates". J. Appl. Phys. 109: 084525. Bibcode:2011JAP...109h4525V. doi:10.1063/1.3580514.
  26. ↑ Darren; Vosgueritchian, Michael; Tee, C.-K.; Bolander, John A.; Bao, Zhenan (2012). "Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates". Chem. Mater 24 (2): 373–382. doi:10.1021/cm203216m.
  27. ↑ Lange, Ulrich; Roznyatovskaya, Nataliya V.; Mirsky, Vladimir M. (2008). "Conducting polymers in chemical sensors and arrays". Analytica Chimica Acta 614 (1): 1–26. doi:10.1016/j.aca.2008.02.068. PMID 18405677.
  28. ↑ The Future of ITO: Transparent Conductor and ITO Replacement Markets
  29. ↑ Handbook of Nanostructured Materials and Nanotechnology; Nalwa, H.S., Ed.; Academic Press: New York, NY, USA, 2000; Volume 5, p. 501
  30. ↑ Overview on Organic Electronics
  31. ↑ Organic Electronics Association
  32. ↑ Conjugated Polymers: Electronic Conductors (April 2001)

Further reading

External links

This article is issued from Wikipedia - version of the Saturday, February 13, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.