Colossus-class battleship (1882)

HMS Colossus, lead ship of the class, painted in 1891, Malta
Class overview
Builders: Portsmouth Dockyard, Pembroke Dockyard
Operators: Royal Navy
Preceded by: Ajax class
Succeeded by: Admiral class
In commission: 1882–1910
Completed: 2
Retired: 2
General characteristics
Displacement: 9,420 tons
Length: 325 ft (99 m) pp
Beam: 68 ft (21 m)
Draught: 25 ft 9 in (7.85 m)
Propulsion: 2-shaft Maudslay engine, 7,488 ihp
Speed: 16.5 knots (30.6 km/h)
Armament:
Armour:

The Colossus-class battleships were ironclad warships, carrying their main armament in turrets, which served in the Victorian Royal Navy from 1882. They were the first British warships to carry large rifled breech-loading main guns.

Design

Right elevation and plan as depicted in Brassey's Naval Annual 1896

They were in all essential points improved versions of the Ajax class, with slightly greater displacement, protection and speed, with better handling characteristics, and most significantly, with breech-loading artillery replacing the obsolescent muzzle loaders. they also used steel rather than iron for most of the hull structure, and utilised the innovative compound armour for the belt and turrets.

The class was originally designed to carry the then-standard muzzle-loading artillery, while European navies had already for several years been equipped with breech-loading guns. At this time, for historical reasons, the Board of Admiralty was ultimately responsible for the designs of Royal Naval warships, but the War Office was responsible for the design and provision of naval artillery. In 1879, while the Colossus class was under construction, a 100-ton muzzle-loader was being tested at the Royal Arsenal, Woolwich, and the 16-inch 80-ton guns destined for HMS Inflexible were nearly complete. Responding to a groundswell of professional opinion, the Admiralty sent a group of senior officers to witness and report on the performance of the new breech loading weapons being produced at Krupps at Essen. As a result of their report, Woolwich undertook the manufacture of 12 inch calibre breech-loaders, with a breech mechanism manufactured at Elswick. The Colossus class was nominated to be armed with these guns; the delay in their manufacture largely accounts for the protracted building times of these vessels.

Both ships did well on sea-trials, exceeding their design speed. They threw up what is described as a "remarkable bow wave, which rose like a solid wall for thirteen feet, the like of which has never been observed." They had a quick roll, and because of the low freeboard and the long chases of the guns, the gun muzzles dipped into the sea at a roll of 13° when trained on the beam. They were fitted with large bilge keels and with anti-rolling tanks.

They were both reported to be slow to respond to the helm, with large turning circles.

References

External links

Wikimedia Commons has media related to Colossus class battleship (1882).
This article is issued from Wikipedia - version of the Sunday, October 11, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.