Chromium(III) sulfate

Chromium(III) sulfate
Names
IUPAC name
Chromium(III) sulfate
Other names
Basic chromium sulfate, chromic sulfate
Identifiers
10101-53-8 YesY
13520-66-6 (dodecahydrate) N
ChemSpider 21241287 N
Jmol interactive 3D Image
PubChem 24930
UNII Y0C99N5TMZ YesY
Properties
Cr2(SO4)3 • 12H2O
Molar mass 392.16 g/mol
608.363 g/mol (dodecahydrate)

716.45 g/mol (octadecahydrate)

Appearance reddish-brown crystals (anhydrous), purple crystals (hydrated)
Density 3.10 g/cm3 (anhydrous)
1.86 g/cm3 (pentadecahydrate)
1.709 g/cm3 (octadecahydrate)
Melting point 90 °C
Boiling point decomposes to chromic acid
insoluble (anhydrous)
soluble (hydrated)
Solubility soluble in alcohol
practically insoluble in acid
Hazards
Safety data sheet MSDS
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
0
1
0
Flash point Non-flammable
US health exposure limits (NIOSH):
TWA 1 mg/m3[1]
TWA 0.5 mg/m3[1]
250 mg/m3[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Chromium(III) sulfate usually refers to the inorganic compound with the formula Cr2(SO4)3 • 12(H2O). This consists of the hydrated sulfate salt of the metal aquo complex with the formula [Cr(H2O)6]3+, which is responsible for the purple color of this salt. It is widely used in the tanning of leather, with associated environmental damage.[2]

Properties

Heating chromium(III) sulfate leads to partial dehydration to give a hydrated green salt (CAS#15244-38-9) and eventually the anhydrous derivative (CAS#10101-53-8).

Production

Basic chromium sulfate is produced from chromate salts by reduction with sulfur dioxide, although other methods exist.[3] The hydrous form may be formed by the reaction of chromium(III) oxide and sulfuric acid.

Cr2O3 + 3 H2SO4 → Cr2(SO4)3 + 3 H2O

References

  1. 1 2 3 "NIOSH Pocket Guide to Chemical Hazards #0141". National Institute for Occupational Safety and Health (NIOSH).
  2. ↑ http://youtu. be /a0UCeTjhSJI
  3. ↑ Gerd Anger, Jost Halstenberg, Klaus Hochgeschwender, Christoph Scherhag, Ulrich Korallus, Herbert Knopf, Peter Schmidt, Manfred Ohlinger (2005), "Chromium Compounds", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a07_067


This article is issued from Wikipedia - version of the Sunday, November 01, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.