Chevrolet L78

The L78 was a Big-Block motor produced by Chevrolet between 1965 and 1970. Rated at 425 horsepower for its first year, the rating dropped to 375 horsepower in subsequent years (although there was no change in power). Between 1966 and 1969 it was the most powerful Regular Production Option engine available in Chevrolet's intermediate line, making it a highly-collectible muscle car engine today.

History

The second-generation Chevrolet Big-Block engine was introduced at the 1963 Daytona 500 as the Mark II. The block entered production in mid 1965 as the Mark IV 396 cubic inch "Turbo-Jet," phasing out the first-generation Y Series Big-Block. In its first year the 396 was available as the L78 option in Corvettes and full-sized (Impala, Bel Air, Biscayne) models, and as the L37 in the intermediate (Chevelle) model. These engines differed only in that the L78 had a solid-lifter cam shaft, while the L37 had an hydraulic-lifter cam shaft.

In 1966 the L78 was available exclusively in the intermediate line. For 1967 the engine was additionally available in Chevrolet's new pony car, the Camaro. The following year the motor became available in the compact Chevy II also.

For the 1970 model year the 396 was bored 0.030 inches, resulting in a 402 cubic inch engine. Despite this, the motor was still badged as a 396. 1970 was also the final production year for the L78. Although 1970 LS6 Chevelles are generally more collectible today, 1970 L78 Chevelles are in fact rarer (4,475 units versus 2,144).

Between 1966 and 1969 the L78 was the highest-horsepower engine available in Chevrolet's intermediate line via a Regular Production Option (RPO). Despite this, in 1969 an L72 (427 cubic inches, 425 horsepower) engine could be ordered in an intermediate via a Central Office Production Order (COPO). This option bypassed a rule that existed prior to 1970 wherein intermediate models were restricted to engines with displacements less than 400 cubic inches. Only 323 of these cars were produced. With the lifting of the restriction in 1970 and the introduction of the 454, the COPO option in Chevelles was discontinued.

L89

A version of the L78 was also produced with aluminum cylinder heads and sold as RPO L89. This option did not change performance, but reduced engine weight by roughly 75 pounds. This engine was available from 1968 to 1970.

Production numbers

L78

Full (Impala, Bel Air, Biscayne) Intermediate (Chevelle, El Camino) Compact (Chevy II, Nova) Pony (Camaro) Sports (Corvette)
1965 1838 2157
1966 3099
1967 612 1138*
1968 4751 667 4575**
1969 9486 4951 4889
1970 2144 3765 600

L78/L89

Intermediate (Chevelle, El Camino) Compact (Chevy II, Nova) Pony (Camaro)
1968 272
1969 400 311 311
1970 18

References

This article is issued from Wikipedia - version of the Thursday, November 26, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.