Chainplate

Chainplate on a Bavaria 35 Match without shrouds mounted.

A chainplate is a metal plate used to fasten a shroud or stay to the hull of a sailboat. One end of the chainplate is normally fastened to a turnbuckle which is connected to the shroud or stay, whereas the remainder of the chainplate normally has multiple holes that are bolted to the hull.^[1] This distributes the load across the hull, making it possible for a somewhat lighter hull to support the load of the shrouds and stays.

References

↑ Rig-Rite Inc's description of chainplates

Sails, spars and rigging

Rigs	Bermuda rig Cat rig Full rig Gaff rig Junk rig Ljungstrom rig Mast aft rig

Sail types	Asymmetrical spinnaker Junk sail Lugsail Parafoil Ringtail Spinnaker Turbosail Rotorsail Wingsail

Sails (sail plan)	Blooper Course Crab claw Driver Extra Fisherman Genoa Gennaker Jib Lateen Mainsail Moonraker Royal Skysail Screecher Spanker Spinnaker Spritsail Staysail Studding Topgallant Topsail Trysail Watersail

Sail anatomy and materials	Clew Foot Head Leech Luff Roach Tack Throat Peak Dacron Technora Kevlar Twaron

Spars	Boom Bowsprit Boomkin Dolphin striker a/k/a Martingale Pelican striker Fore-mast Gaff Jackstaff Jibboom Jigger-mast Jury rigging Main-mast Mast Mizzen-mast Truck Spinnaker pole Spreader Sprit Topmast Yard

Rigging components	Backstay Block Bobstay Boomkicker Braces Buntlines Chainplates Cleat Clevis pin Clewlines Cunningham Deadeye Downhaul Earing Fairlead Forestay Gasket Gooseneck Gunter Guy Halyard Kicker Lazy jack Outhaul Parrel beads Peak Preventer Ratlines Running rigging Shackle Spinnaker chute Standing rigging Sheet Shroud Stay mouse Stays Throat Topping lift Trapeze Traveller Turnbuckle Vang Windex

This article is issued from Wikipedia - version of the Sunday, June 02, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.