Cassini–Huygens

Cassini–Huygens

Artist's concept of Cassini's orbit insertion around Saturn
Mission type	Cassini: Saturn orbiter Huygens: Titan lander
Operator	NASA/JPL / ESA / ASI
COSPAR ID	1997-061A
SATCAT №	25008
Website	ASI ESA NASA
Mission duration	Elapsed: 18 years, 7 months and 13 days from launch 11 years, 7 months and 13 days at Saturn En route: 7 years Primary mission: 4 years Extended missions:  Equinox: 2 years  Solstice: 3 years elapsed Expected end of life: 2017
Spacecraft properties
Dry mass	2,523 kilograms (5,562 lb)[1]
Power	~880 watts (BOL)[2] ~670 watts (2010)[2]
Start of mission
Launch date	October 15, 1997, 08:43:00 (1997-10-15UTC08:43Z) UTC
Rocket	Titan IV(401)B
Launch site	Cape Canaveral SLC-40
Orbital parameters
Reference system	Kronocentric
Flyby of Venus (Gravity assist)
Closest approach	April 26, 1998
Flyby of Venus (Gravity assist)
Closest approach	June 24, 1999
Flyby of Earth-Moon system (Gravity assist)
Closest approach	August 18, 1999, 03:28 UTC
Flyby of 2685 Masursky (Incidental)
Closest approach	January 23, 2000
Flyby of Jupiter (Gravity assist)
Closest approach	December 30, 2000
Saturn orbiter
Orbital insertion	July 1, 2004, 02:48:00 UTC
Titan lander
Spacecraft component	Huygens
Landing date	January 14, 2005

Cassini–Huygens is an unmanned spacecraft sent to the planet Saturn. It is a flagship-class NASA–ESA–ASI robotic spacecraft.^[3] Cassini is the fourth space probe to visit Saturn and the first to enter orbit, and its mission is ongoing as of 2016. It has studied the planet and its many natural satellites since arriving there in 2004.^[4]

Development started in the 1980s. Its design includes a Saturn orbiter, and a lander for the moon Titan. The lander, called Huygens, landed on Titan in 2005. The two-part spacecraft is named after astronomers Giovanni Cassini and Christiaan Huygens.

The spacecraft launched on October 15, 1997 aboard a Titan IVB/Centaur and entered orbit around Saturn on July 1, 2004, after an interplanetary voyage that included flybys of Earth, Venus, and Jupiter. On December 25, 2004, Huygens separated from the orbiter and reached Saturn's moon Titan on January 14, 2005. It entered Titan's atmosphere and descended to the surface. It successfully returned data to Earth, using the orbiter as a relay. This was the first landing ever accomplished in the outer Solar System.

Overview

Sixteen European countries and the United States make up the team responsible for designing, building, flying and collecting data from the Cassini orbiter and Huygens probe. The mission is managed by NASA's Jet Propulsion Laboratory in the United States, where the orbiter was assembled. Huygens was developed by the European Space Research and Technology Centre. The Centre's prime contractor, Aérospatiale of France (now Thales Alenia Space), assembled the probe with equipment and instruments supplied by many European countries (Huygens' batteries and two scientific instruments by the United States). The Italian Space Agency (ASI) provided the Cassini orbiter's high-gain radio antenna, with the incorporation of a low-gain antenna (that ensure telecommunications with the Earth for the entire duration of the mission), a compact and lightweight radar, which also uses the high-gain antenna and serves as a synthetic aperture radar, a radar altimeter, a radiometer, the radio science subsystem (RSS), the visible channel portion VIMS-V of VIMS spectrometer.^[5] The VIMS infrared counterpart was provided by NASA, as well as Main Electronic Assembly, which includes electronic subassemblies provided by CNES of France.^[6][7]

On April 16, 2008, NASA announced a two-year extension of the funding for ground operations of this mission, at which point it was renamed to the Cassini Equinox Mission.^[8] This was again extended in February 2010 with the Cassini Solstice Mission.

Naming

It consists of two main elements: the ASI/NASA Cassini orbiter, named for the Italian-French astronomer Giovanni Domenico Cassini, discoverer of Saturn's ring divisions and four of its satellites; and the ESA-developed Huygens probe, named for the Dutch astronomer, mathematician and physicist Christiaan Huygens, discoverer of Titan. The mission was commonly called Saturn Orbiter Titan Probe (SOTP) during gestation, both as a Mariner Mark II mission and generically.

Cassini-Huygens is a flagship-class mission to the outer planets.^[3] The other planetary flagships include Galileo, Voyager, and Viking.^[3]

Objectives

Cassini has several objectives, including:^[9]

• Determine the three-dimensional structure and dynamic behavior of the rings of Saturn.
• Determine the composition of the satellite surfaces and the geological history of each object.
• Determine the nature and origin of the dark material on Iapetus's leading hemisphere.
• Measure the three-dimensional structure and dynamic behavior of the magnetosphere.
• Study the dynamic behavior of Saturn's atmosphere at cloud level.
• Study the time variability of Titan's clouds and hazes.
• Characterize Titan's surface on a regional scale.

Cassini–Huygens was launched on October 15, 1997, from Cape Canaveral Air Force Station's Space Launch Complex 40 using a U.S. Air Force Titan IVB/Centaur rocket. The complete launcher was made up of a two-stage Titan IV booster rocket, two strap-on solid rocket motors, the Centaur upper stage, and a payload enclosure, or fairing.

The total cost of this scientific exploration mission is about US$3.26 billion, including $1.4 billion for pre-launch development, $704 million for mission operations, $54 million for tracking and $422 million for the launch vehicle. The United States contributed $2.6 billion (80%), the ESA $500 million (15%), and the ASI $160 million (5%).^[10]

The primary mission for Cassini was completed on July 30, 2008. The mission was extended to June 2010 (Cassini Equinox Mission).^[11] This studied the Saturn system in detail during the planet's equinox, which happened in August 2009.^[8]

On February 3, 2010, NASA announced another extension for Cassini, lasting 6½ years until 2017, ending at the time of summer solstice in Saturn's northern hemisphere (Cassini Solstice Mission). The extension enables another 155 revolutions around the planet, 54 flybys of Titan and 11 flybys of Enceladus.^[12] In 2017, an encounter with Titan will change its orbit in such a way that, at closest approach to Saturn, it will be only 3,000 km above the planet's cloudtops, below the inner edge of the D ring. This sequence of "proximal orbits" will end when another encounter with Titan sends the probe into Saturn's atmosphere.

Itinerary

Selected destinations (ordered by size but not to scale)
Titan	Earth's Moon	Rhea	Iapetus	Dione	Tethys	Enceladus plumes
Mimas	Hyperion	Phoebe	Janus	Epimetheus	Prometheus	Pandora
Helene	Atlas	Telesto	Calypso	Methone

History

Cassini–Huygens's origins date to 1982, when the European Science Foundation and the American National Academy of Sciences formed a working group to investigate future cooperative missions. Two European scientists suggested a paired Saturn Orbiter and Titan Probe as a possible joint mission. In 1983, NASA's Solar System Exploration Committee recommended the same Orbiter and Probe pair as a core NASA project. NASA and the European Space Agency (ESA) performed a joint study of the potential mission from 1984 to 1985. ESA continued with its own study in 1986, while the American astronaut Sally Ride, in her influential 1987 report "NASA Leadership and America's Future in Space", also examined and approved of the Cassini mission.

While Ride's report described the Saturn orbiter and probe as a NASA solo mission, in 1988 the Associate Administrator for Space Science and Applications of NASA Len Fisk returned to the idea of a joint NASA and ESA mission. He wrote to his counterpart at ESA, Roger Bonnet, strongly suggesting that ESA choose the Cassini mission from the three candidates at hand and promising that NASA would commit to the mission as soon as ESA did.

At the time, NASA was becoming more sensitive to the strain that had developed between the American and European space programs as a result of European perceptions that NASA had not treated it like an equal during previous collaborations. NASA officials and advisers involved in promoting and planning Cassini–Huygens attempted to correct this trend by stressing their desire to evenly share any scientific and technology benefits resulting from the mission. In part, this newfound spirit of cooperation with Europe was driven by a sense of competition with the Soviet Union, which had begun to cooperate more closely with Europe as ESA drew further away from NASA.

The collaboration not only improved relations between the two space programs but also helped Cassini–Huygens survive congressional budget cuts in the United States. Cassini–Huygens came under fire politically in both 1992 and 1994, but NASA successfully persuaded the U.S. Congress that it would be unwise to halt the project after ESA had already poured funds into development because frustration on broken space exploration promises might spill over into other areas of foreign relations. The project proceeded politically smoothly after 1994, although citizens' groups concerned about its potential environmental impact attempted to derail it through protests and lawsuits until and past its 1997 launch.^{[13][14][15][16][17]}

Spacecraft design

The spacecraft was planned to be the second three-axis stabilized, RTG-powered Mariner Mark II, a class of spacecraft developed for missions beyond the orbit of Mars.

Cassini was developed simultaneously with the Comet Rendezvous Asteroid Flyby (CRAF) spacecraft, but budget cuts and project rescopings forced NASA to terminate CRAF development to save Cassini. As a result, Cassini became more specialized. The Mariner Mark II series was cancelled.

Including the orbiter and probe, it is the second-largest unmanned interplanetary spacecraft built,^[18][19] as well as being among the most complex.^[18] The orbiter has a mass of 2,150 kg (4,740 lb), the probe 350 kg (770 lb). With the launch vehicle adapter and 3,132 kg (6,905 lb) of propellants at launch, the spacecraft had a mass of 5,600 kg (12,300 lb). Only the two Phobos 1 and 2 spacecraft sent to Mars by the Soviet Union were larger.

The Cassini spacecraft is 6.8 meters (22 ft) high and 4 meters (13 ft) wide. Spacecraft complexity is increased by its trajectory (flight path) to Saturn, and by the ambitious science at its destination. Cassini has 1,630 interconnected electronic components, 22,000 wire connections, and 14 kilometers (8.7 mi) of cabling. The core control computer CPU was a redundant MIL-STD-1750A control system.

Cassini is powered by 32.7 kg^[20] of plutonium-238—the heat from the material's radioactive decay is turned into electricity. Huygens was supported by Cassini during cruise, but used chemical batteries when independent.

At present the Cassini probe is orbiting Saturn, at a distance of 8.2 and 10.2 astronomical units from the Earth. It takes 68 to 84 minutes for radio signals to travel from Earth to the spacecraft, and vice versa. Thus ground controllers cannot give "real-time" instructions for daily operations or for unexpected events. Even if response was immediate, at least two hours pass between the occurrence of a problem and the reception of the engineers' response by the satellite.

Instruments

Summary

Instruments:^[22]

• Optical Remote Sensing ("Located on on the remote sensing pallet")^[22]
  • Composite Infrared Spectrometer (CIRS)
  • Imaging Science Subsystem (ISS)
  • Ultraviolet Imaging Spectrograph (UVIS)
  • Visible and Infrared Mapping Spectrometer (VIMS)
• Fields, Particles and Waves
  • Cassini Plasma Spectrometer (CAPS)
  • Cosmic Dust Analyzer (CDA)
  • Ion and Neutral Mass Spectrometer (INMS)
  • Magnetometer (MAG)
  • Magnetospheric Imaging Instrument (MIMI)
  • Radio and Plasma Wave Science (RPWS)
• Microwave Remote Sensing
  • Radar
  • Radio Science (RSS)

List

Cassini's instrumentation consists of: a synthetic aperture radar mapper, a charge-coupled device imaging system, a visible/infrared mapping spectrometer, a composite infrared spectrometer, a cosmic dust analyzer, a radio and plasma wave experiment, a plasma spectrometer, an ultraviolet imaging spectrograph, a magnetospheric imaging instrument, a magnetometer and an ion/neutral mass spectrometer. Telemetry from the communications antenna and other special transmitters (an S-band transmitter and a dual-frequency K_a-band system) will also be used to make observations of the atmospheres of Titan and Saturn and to measure the gravity fields of the planet and its satellites.

Cassini Plasma Spectrometer (CAPS)

The CAPS is a direct sensing instrument that measures the energy and electrical charge of particles that the instrument encounters (the number of electrons and protons in the particle). CAPS will measure the molecules originating from Saturn's ionosphere and also determine the configuration of Saturn's magnetic field. CAPS will also investigate plasma in these areas as well as the solar wind within Saturn's magnetosphere.^[23][24] CAPS was turned off June 2011 due to an electrical short circuit that occurred in the instrument. The instrument was powered on in March 2012; after 78 days a second short circuit forced the instrument to be again shut down.^[25]

Cosmic Dust Analyzer (CDA)

The CDA is a direct sensing instrument that measures the size, speed, and direction of tiny dust grains near Saturn. Some of these particles are orbiting Saturn, while others may come from other star systems. The CDA on the orbiter is designed to learn more about these particles, the materials in other celestial bodies and potentially about the origins of the universe.^[23]

Composite Infrared Spectrometer (CIRS)

The CIRS is a remote sensing instrument that measures the infrared waves coming from objects to learn about their temperatures, thermal properties, and compositions. Throughout the Cassini–Huygens mission, the CIRS will measure infrared emissions from atmospheres, rings and surfaces in the vast Saturn system. It will map the atmosphere of Saturn in three dimensions to determine temperature and pressure profiles with altitude, gas composition, and the distribution of aerosols and clouds. It will also measure thermal characteristics and the composition of satellite surfaces and rings.^[23]

Ion and Neutral Mass Spectrometer (INMS)

The INMS is a direct sensing instrument that analyzes charged particles (like protons and heavier ions) and neutral particles (like atoms) near Titan and Saturn to learn more about their atmospheres. INMS is intended also to measure the positive ion and neutral environments of Saturn's icy satellites and rings.^[23][26][27]

Imaging Science Subsystem (ISS)

The ISS is a remote sensing instrument that captures most images in visible light, and also some infrared images and ultraviolet images. The ISS has taken hundreds of thousands of images of Saturn, its rings, and its moons. The ISS has a wide-angle camera (WAC) that takes pictures of large areas, and a narrow-angle camera (NAC) that takes pictures of small areas in fine detail. Each of these cameras uses a sensitive charge-coupled device (CCD) as its electromagnetic wave detector. Each CCD has a 1,024 square array of pixels, 12 μm on a side. Both cameras allow for many data collection modes, including on-chip data compression. Both cameras are fitted with spectral filters that rotate on a wheel—to view different bands within the electromagnetic spectrum ranging from 0.2 to 1.1 μm.^[23][28]

Dual Technique Magnetometer (MAG)

The MAG is a direct sensing instrument that measures the strength and direction of the magnetic field around Saturn. The magnetic fields are generated partly by the molten core at Saturn's center. Measuring the magnetic field is one of the ways to probe the core. MAG aims to develop a three-dimensional model of Saturn's magnetosphere, and determine the magnetic state of Titan and its atmosphere, and the icy satellites and their role in the magnetosphere of Saturn.^[23][29]

Magnetospheric Imaging Instrument (MIMI)

The MIMI is both a direct and remote sensing instrument that produces images and other data about the particles trapped in Saturn's huge magnetic field, or magnetosphere. This information will be used to study the overall configuration and dynamics of the magnetosphere and its interactions with the solar wind, Saturn's atmosphere, Titan, rings, and icy satellites.^[23][30] MIMI includes the Ion and Neutral Camera (INCA), which captures and measures Energetic Neutral Atoms (ENAs).^[31]

Radar

The on-board radar is an active and passive sensing instrument that has produced maps of Titan's surface. The active radar can send radar waves able to penetrate the thick veil of haze surrounding Titan. By measuring the send and return time of the signals it is possible to determine the height of large surface features, such as mountains and canyons. The passive radar listens for radio waves that Saturn or its moons may emit.^[23]

Radio and Plasma Wave Science instrument (RPWS)

The RPWS is a direct and remote sensing instrument that receives and measures radio signals coming from Saturn, including the radio waves given off by the interaction of the solar wind with Saturn and Titan. RPWS measures the electric and magnetic wave fields in the interplanetary medium and planetary magnetospheres. It also determines the electron density and temperature near Titan and in some regions of Saturn's magnetosphere. RPWS studies the configuration of Saturn's magnetic field and its relationship to Saturn Kilometric Radiation (SKR), as well as monitoring and mapping Saturn's ionosphere, plasma, and lightning from Saturn's (and possibly Titan's) atmosphere.^[23]

Radio Science Subsystem (RSS)

The RSS is a remote-sensing instrument that uses radio antennas on Earth to observe the way radio signals from the spacecraft change as they are sent through objects, such as Titan's atmosphere or Saturn's rings, or even behind the Sun. The RSS also studies the compositions, pressures and temperatures of atmospheres and ionospheres, radial structure and particle size distribution within rings, body and system masses and gravitational waves. The instrument uses the spacecraft X-band communication link as well as S-band downlink and K_a-band uplink and downlink.^[23]

Ultraviolet Imaging Spectrograph (UVIS)

The UVIS is a remote-sensing instrument that captures images of the ultraviolet light reflected off an object, such as the clouds of Saturn and/or its rings, to learn more about their structure and composition. Designed to measure ultraviolet light over wavelengths from 55.8 to 190 nm, this instrument is also a tool to help determine the composition, distribution, aerosol particle content and temperatures of their atmospheres. Unlike other types of spectrometer, this sensitive instrument can take both spectral and spatial readings. It is particularly adept at determining the composition of gases. Spatial observations take a wide-by-narrow view, only one pixel tall and 64 pixels across. The spectral dimension is 1,024 pixels per spatial pixel. Also, it can take many images that create movies of the ways in which this material is moved around by other forces.^[23]

Visible and Infrared Mapping Spectrometer (VIMS)

The VIMS is a remote sensing instrument that captures images using visible and infrared light to learn more about the composition of moon surfaces, the rings, and the atmospheres of Saturn and Titan. It is made up of two cameras in one: one used to measure visible light, the other infrared. VIMS measures reflected and emitted radiation from atmospheres, rings and surfaces over wavelengths from 350 to 5100 nm, to help determine their compositions, temperatures and structures. It also observes the sunlight and starlight that passes through the rings to learn more about their structure. Scientists plan to use VIMS for long-term studies of cloud movement and morphology in the Saturn system, to determine Saturn's weather patterns.^[23]

Plutonium power source

Because of Saturn's distance from the Sun, solar arrays were not feasible as power sources for this space probe.^[32] To generate enough power, such arrays would have been too large and too heavy.^[32] Instead, the Cassini orbiter is powered by three radioisotope thermoelectric generators (RTGs), which use heat from the natural decay of about 33 kg (73 lb) of plutonium-238 (in the form of plutonium dioxide) to generate direct current electricity via thermoelectrics.^[32] The RTGs on the Cassini mission have the same design as those used on the New Horizons, Galileo, and Ulysses space probes, and they were designed to have very long operational lifetimes.^[32] At the end of the nominal 11-year Cassini mission, they will still be able to produce 600 to 700 watts of electrical power.^[32] (One of the spare RTGs for the Cassini mission was used to power the New Horizons mission to Pluto and the Kuiper belt, which was designed and launched later on.)

To gain momentum while already in flight, the trajectory of the Cassini mission included several gravitational slingshot maneuvers: two fly-by passes of Venus, one more of the Earth, and then one of the planet Jupiter. The terrestrial flyby was the final instance when the Cassini space probe posed any conceivable danger to human beings. The maneuver was successful, with Cassini passing by 1,171 km (728 mi) above the Earth on August 18, 1999.^[33] Had there been any malfunction causing the Cassini space probe to collide with the Earth, NASA's complete environmental impact study estimated that, in the worst case (with an acute angle of entry in which Cassini would gradually burn up), a significant fraction of the 33 kg^[20] of plutonium-238 inside the RTGs would have been dispersed into the Earth's atmosphere so that up to five billion people (i.e. almost the entire terrestrial population) could have been exposed, causing up to an estimated 5,000 additional cancer deaths^[34] (0.0005 per cent, i.e. a fraction 0.000005, of 1 billion cancer deaths expected anyway from other causes; the product is incorrectly calculated elsewhere^[35] as 500,000 deaths), but the chance of that happening were less than one in one million.^[34]

Telemetry

The Cassini spacecraft is capable of transmitting in several different telemetry formats. The telemetry subsystem is perhaps the most important subsystem, because without it there could be no data return.

The telemetry was developed from ground up, due to the spacecraft using a more modern set of computers than previous missions.^[36] Therefore, Cassini was the first spacecraft to adopt mini-packets to reduce the complexity of the Telemetry Dictionary, and the software development process led to the creation of a Telemetry Manager for the mission.

There are currently around 1088 channels (in 67 mini-packets) assembled in the Cassini Telemetry Dictionary. Out of these 67 lower complexity mini-packets, 6 mini-packets contained the subsystem covariance and Kalman gain elements (161 measurements), not used during normal mission operations. This left 947 measurements in 61 mini-packets.

A total of seven telemetry maps corresponding to 7 AACS telemetry modes were constructed. These modes are: (1) Record; (2) Nominal Cruise; (3) Medium Slow Cruise; (4) Slow Cruise; (5) Orbital Ops; (6) Av; (7) ATE (Attitude Estimator) Calibration. These 7 maps cover all spacecraft telemetry modes.

Huygens probe

The Huygens probe, supplied by the European Space Agency (ESA) and named after the 17th century Dutch astronomer who first discovered Titan, Christiaan Huygens, scrutinized the clouds, atmosphere, and surface of Saturn's moon Titan in its descent on January 15, 2005. It was designed to enter and brake in Titan's atmosphere and parachute a fully instrumented robotic laboratory down to the surface.^[37]

The probe system consisted of the probe itself which descended to Titan, and the probe support equipment (PSE) which remained attached to the orbiting spacecraft. The PSE includes electronics that track the probe, recover the data gathered during its descent, and process and deliver the data to the orbiter that transmits it to Earth. The core control computer CPU was a redundant MIL-STD-1750A control system.

The data were transmitted by a radio link between Huygens and Cassini provided by Probe Data Relay Subsystem (PDRS). As the probe's mission could not be telecommanded from Earth because of the great distance, it was automatically managed by the Command Data Management Subsystem (CDMS). The PDRS and CDMS were provided by the Italian Space Agency (ASI).

Selected events and discoveries

Venus and Earth fly-bys and the cruise to Jupiter

The Cassini space probe performed two gravitational-assist flybys of Venus on April 26, 1998, and June 24, 1999. These flybys provided the space probe with enough momentum to travel all the way out to the asteroid belt. At that point, the Sun's gravity pulled the space probe back into the inner Solar System.

On August 18, 1999, at 03:28 UTC, the craft made a gravitational-assist flyby of the Earth. One hour and 20 minutes before closest approach, Cassini made its closest approach to the Earth's Moon at 377,000 kilometers, and it took a series of calibration photos.

On Jan 23, 2000, Cassini performed a flyby of the asteroid 2685 Masursky at around 10:00 UTC. It took photos^[38] in the period five to seven hours before the flyby at a distance of 1.6 million kilometers, and a diameter of 15 to 20 km was estimated for the asteroid.

Jupiter flyby

Cassini made its closest approach to Jupiter on December 30, 2000, and made many scientific measurements. About 26,000 images of Jupiter, its faint rings, and its moons were taken during the six month flyby. It produced the most detailed global color portrait of the planet yet (see image at right), in which the smallest visible features are approximately 60 km (37 mi) across.^[39]

A major finding of the flyby, announced on March 6, 2003, was of Jupiter's atmospheric circulation. Dark "belts" alternate with light "zones" in the atmosphere, and scientists had long considered the zones, with their pale clouds, to be areas of upwelling air, partly because many clouds on Earth form where air is rising. But analysis of Cassini imagery showed that individual storm cells of upwelling bright-white clouds, too small to see from Earth, pop up almost without exception in the dark belts. According to Anthony Del Genio of NASA's Goddard Institute for Space Studies, "the belts must be the areas of net-rising atmospheric motion on Jupiter, [so] the net motion in the zones has to be sinking."

Other atmospheric observations included a swirling dark oval of high atmospheric-haze, about the size of the Great Red Spot, near Jupiter's north pole. Infrared imagery revealed aspects of circulation near the poles, with bands of globe-encircling winds, with adjacent bands moving in opposite directions.

The same announcement also discussed the nature of Jupiter's rings. Light scattering by particles in the rings showed the particles were irregularly shaped (rather than spherical) and likely originate as ejecta from micrometeorite impacts on Jupiter's moons, probably Metis and Adrastea.

Tests of general relativity

On October 10, 2003, the mission's science team announced the results of tests of Einstein's general theory of relativity, performed by using radio waves transmitted from the Cassini space probe.^[40] The radio scientists measured a frequency shift in the radio waves to and from the spacecraft, as those passed close to the Sun. According to the general theory of relativity, a massive object like the Sun causes space-time to curve, causing and a beam of radiowaves (or light, or any form of electromagnetic radiation) that passes by the Sun to travel farther.

Although some measurable deviations from the values calculated using the general theory of relativity are predicted by some unusual cosmological models, no such deviations were found by this experiment. Previous tests using radiowaves transmitted by the Viking and Voyager space probes were in agreement with the calculated values from General Relativity to within an accuracy of one part in one thousand. The more refined measurements from the Cassini space probe experiment improved this accuracy to about one part in 51,000.^[41] The data firmly supports Einstein's general theory of relativity.

New moons of Saturn

Using images taken by Cassini, three new moons of Saturn were discovered in 2004. They are very small and were given the provisional names S/2004 S 1, S/2004 S 2 and S/2004 S 5 before being named Methone, Pallene and Polydeuces at the beginning of 2005.

On May 1, 2005, a new moon was discovered by Cassini in the Keeler gap. It was given the designation S/2005 S 1 before being named Daphnis. The only other then-known moon inside Saturn's ring system is Pan.

A fifth new moon was discovered by Cassini on May 30, 2007, and was provisionally labelled S/2007 S 4. It is now known as Anthe.

A press release on February 3, 2009 showed a sixth new moon found by Cassini. The moon is approximately 1/3 of a mile in diameter within the G-ring of the ring system of Saturn, and is now named Aegaeon (formerly S/2008 S 1).^[42]

A press release on November 2, 2009 mentions the seventh new moon found by Cassini on July 26, 2009. It is presently labeled S/2009 S 1 and is approximately 300 m (984 ft.) in diameter in the B-ring system.^[43]

On April 14, 2014, NASA scientists reported the possible beginning of a new moon in the A Ring of the planet Saturn.^[44]

Phoebe flyby

On June 11, 2004, Cassini flew by the moon Phoebe. This was the first opportunity for close-up studies of this moon since the Voyager 2's 1981 flyby. It also was Cassini's only possible flyby for Phoebe due to the mechanics of the available orbits around Saturn.^[45]

The first close-up images were received on June 12, 2004, and mission scientists immediately realized that the surface of Phoebe looks different from asteroids visited by spacecraft. Parts of the heavily cratered surface look very bright in those pictures, and it is currently believed that a large amount of water ice exists under its immediate surface.

Saturn rotation

In an announcement on June 28, 2004, Cassini program scientists described the measurement of the rotational period of Saturn.^[46] Because there are no fixed features on the surface that can be used to obtain this period, the repetition of radio emissions was used. These new data agree with the latest values measured from Earth, and constitute a puzzle to the scientists. It turns out that the radio rotational period has changed since it was first measured in 1980 by Voyager 1, and that it is now 6 minutes longer. This does not indicate a change in the overall spin of the planet, but is thought to be due to movement of the source of the radio emissions to a different latitude, at which the rotation rate is different.

Orbiting Saturn

On July 1, 2004, the spacecraft flew through the gap between the F and G rings and achieved orbit, after a seven-year voyage.^[47] It is the first spacecraft to ever orbit Saturn.

The Saturn Orbital Insertion (SOI) maneuver performed by Cassini was complex, requiring the craft to orient its High-Gain Antenna away from Earth and along its flight path, to shield its instruments from particles in Saturn's rings. Once the craft crossed the ring plane, it had to rotate again to point its engine along its flight path, and then the engine fired to decelerate the craft by 622 meters per second^[48] to allow Saturn to capture it. Cassini was captured by Saturn's gravity at around 8:54 pm Pacific Daylight Time on June 30, 2004. During the maneuver Cassini passed within 20,000 km (12,000 mi) of Saturn's cloud tops.

Although it is in Saturn orbit, departure from the Saturn system was evaluated in 2008 during end of mission planning.^[49]

Titan flybys

Cassini had its first flyby of Saturn's largest moon, Titan, on July 2, 2004, a day after orbit insertion, when it approached to within 339,000 km (211,000 mi) of Titan. Images taken through special filters (able to see through the moon's global haze) showed south polar clouds thought to be composed of methane and surface features with widely differing brightness. On October 27, 2004, the spacecraft executed the first of the 45 planned close flybys of Titan when it passed a mere 1,200 kilometers above the moon. Almost four gigabits of data were collected and transmitted to Earth, including the first radar images of the moon's haze-enshrouded surface. It revealed the surface of Titan (at least the area covered by radar) to be relatively level, with topography reaching no more than about 50 meters in altitude. The flyby provided a remarkable increase in imaging resolution over previous coverage. Images with up to 100 times better resolution were taken and are typical of resolutions planned for subsequent Titan flybys.

Huygens lands on Titan

External images

Raw images from the Huygens probe descent on 14 January 2005 (37 Pages) © ESA/NASA/JPL/U. of Arizona. (ESA hosting)

Cassini released the Huygens probe on December 25, 2004, by means of a spring and spiral rails intended to rotate the probe for greater stability. It entered the atmosphere of Titan on January 14, 2005, and after a two-and-a-half-hour descent landed on solid ground. Although Cassini successfully relayed 350 of the pictures that it received from Huygens of its descent and landing site, a software error failed to turn on one of the Cassini receivers and caused the loss of another 350 pictures.^[50]

Enceladus flybys

During the first two close flybys of the moon Enceladus in 2005, Cassini discovered a deflection in the local magnetic field that is characteristic for the existence of a thin but significant atmosphere. Other measurements obtained at that time point to ionized water vapor as its main constituent. Cassini also observed water ice geysers erupting from the south pole of Enceladus, which gives more credibility to the idea that Enceladus is supplying the particles of Saturn's E ring. Mission scientists began to suspect that there may be pockets of liquid water near the surface of the moon that fuel the eruptions.^[51]

On March 12, 2008, Cassini made a close fly-by of Enceladus, passing within 50 km of the moon's surface.^[52] The spacecraft passed through the plumes extending from its southern geysers, detecting water, carbon dioxide and various hydrocarbons with its mass spectrometer, while also mapping surface features that are at much higher temperature than their surroundings with the infrared spectrometer.^[53] Cassini was unable to collect data with its cosmic dust analyzer due to an unknown software malfunction.

Wikinews has related news: Cassini discovers organic material on Saturn moon

On November 21, 2009, Cassini made its eighth flyby of Enceladus,^[54] this time with a different geometry, approaching within 1,600 kilometers (990 mi) of the surface. The Composit Infrared Spectrograph (CIRS) instrument produced a map of thermal emissions from the Baghdad Sulcus 'tiger stripe'. The data returned helped create a detailed and high resolution mosaic image of the southern part of the moon's Saturn-facing hemisphere.

On April 3, 2014, nearly ten years after Cassini entered Saturn's orbit, NASA reported evidence of a large salty internal ocean of liquid water in Enceladus. The presence of an internal salty ocean in contact with the moon's rocky core, places Enceladus "among the most likely places in the Solar System to host alien microbial life."^[55][56][57] On June 30, 2014, NASA celebrated ten years of Cassini exploring Saturn and its moons, highlighting the discovery of water activity on Enceladus among other findings.^[58]

In September 2015, NASA announced that gravitational and imaging data from Cassini were used to analyze the librations of Enceladus' orbit and determined that the moon's surface is not rigidly joined to its core, concluding that the underground ocean must therefore be global in extent.^[59]

On October 28, 2015, Cassini performed a close flyby of Enceladus, coming within 49 km (30 mi) of the surface, and passing through the icy plume above the south pole.^[60] Images and other data from the flyby will be received within 48 hours.^[60]

Radio occultations of Saturn's rings

In May 2005, Cassini began a series of radio occultation experiments, to measure the size-distribution of particles in Saturn's rings, and measure the atmosphere of Saturn itself. For over four months, the craft completed orbits designed for this purpose. During these experiments, it flew behind the ring plane of Saturn, as seen from Earth, and transmitted radio waves through the particles. The radio signals received on Earth were analyzed, for frequency, phase, and power shift of the signal to determine the structure of the rings.

Spoke phenomenon verified

In images captured September 5, 2005, Cassini detected spokes in Saturn's rings,^[61] previously seen only by the visual observer Stephen James O'Meara in 1977 and then confirmed by the Voyager space probes in the early 1980s.^[62][63]

Lakes of Titan

Radar images obtained on July 21, 2006 appear to show lakes of liquid hydrocarbon (such as methane and ethane) in Titan's northern latitudes. This is the first discovery of currently existing lakes anywhere besides on Earth. The lakes range in size from one to one-hundred kilometers across.^[64] On March 13, 2007, the Jet Propulsion Laboratory announced that it found strong evidence of seas of methane and ethane in the northern hemisphere of Titan. At least one of these is larger than any of the Great Lakes in North America.^[65]

Saturn hurricane

In November 2006, scientists discovered a storm at the south pole of Saturn with a distinct eyewall. This is characteristic of a hurricane on Earth and had never been seen on another planet before. Unlike a terrestrial hurricane, the storm appears to be stationary at the pole. The storm is 8,000 kilometers (5,000 mi) across, and 70 kilometers (43 mi) high, with winds blowing at 560 kilometers per hour (350 mph).^[66]

Iapetus flyby

On September 10, 2007, Cassini completed its flyby of the strange, two-toned, walnut-shaped moon, Iapetus. Images were taken from 1,000 miles (1,600 km) above the surface. As it was sending the images back to Earth, it was hit by a cosmic ray that forced it to temporarily enter safe mode. All of the data from the flyby was recovered.^[67]

Mission extension

On April 15, 2008, Cassini received funding for a two-year extended mission. It consisted of 60 more orbits of Saturn, with 21 more close Titan flybys, seven of Enceladus, six of Mimas, eight of Tethys, and one targeted flyby each of Dione, Rhea, and Helene.^[68] The extended mission began on July 1, 2008, and was renamed the Cassini Equinox Mission as the mission coincided with Saturn's equinox.^[69] A proposal was submitted to NASA for a second mission extension, provisionally named the extended-extended mission or XXM.^[70] This was subsequently approved and renamed the Cassini Solstice Mission.^[71] It includes Cassini orbiting Saturn 155 more times, conducting 54 additional flybys of Titan and 11 more of Enceladus.

Great Storm of 2010 and aftermath

On October 25, 2012, Cassini witnessed the aftermath of the massive Great White Spot storm that recurs roughly every 30 years on Saturn.^[72] Data from the composite infrared spectrometer (CIRS) instrument indicated a powerful discharge from the storm that caused a temperature spike in the stratosphere of Saturn 83 K (83 °C; 149 °F) above normal. Simultaneously, a huge increase in ethylene gas was detected by NASA researchers at Goddard Research Center in Greenbelt, Maryland. Ethylene is a colorless gas that is highly uncommon on Saturn and is produced both naturally and through man-made sources on Earth. The storm that produced this discharge was first observed by the spacecraft on December 5, 2010 in Saturn's northern hemisphere. The storm is the first of its kind to be observed by a spacecraft in orbit around Saturn as well as the first to be observed at thermal infrared wavelengths, allowing scientists to observe the temperature of Saturn's atmosphere and track phenomena that are invisible to the naked eye. The spike of ethylene gas that was produced by the storm reached levels that were 100 times more than those thought possible for Saturn. Scientists have also determined that the storm witnessed was the largest, hottest stratospheric vortex ever detected in our solar system, initially being larger than Jupiter's Great Red Spot.

Venus transit

On December 21, 2012, Cassini observed a transit of Venus across the Sun.^[73] The VIMS instrument analyzed sunlight passing though the Venusian atmosphere.^[73] VIMS previously observed the transit of exoplanet HD 189733 b.^[73]

"The Day the Earth Smiled"

On July 19, 2013, the probe was pointed towards Earth to capture an image of the Earth and the Moon, as part of a natural light, multi-image portrait of the entire Saturn system. The event was unique as it was the first time NASA informed the public that a long-distance photo was being taken in advance.^[74][75] The imaging team said they wanted people to smile and wave to the skies, with Cassini scientist, Carolyn Porco, describing the moment as a chance to "celebrate life on the Pale Blue Dot".^[76]

Rhea flyby

On February 9, 2015 the Cassini spacecraft visited Rhea more closely, coming within 29,000 miles (47,000 kilometers).^[77] The spacecraft observed the moon with its cameras producing some of the highest resolution color images yet of Rhea.^[78]

Hyperion flyby

Cassini performed its latest and perhaps final flyby of Saturn's moon Hyperion on 31 May 2015 at a distance of about 34,000 km (21,000 mi).^[79]

Dione flyby

Cassini performed its last flyby of Saturn's moon Dione on 17 August 2015 at a distance of about 295 mi (475 km). A previous flyby was performed on 16 June.^[80]

Spacecraft disposal

The chosen mission ending involves a series of close Saturn passes, approaching within the rings, then an entry into Saturn's atmosphere on September 15, 2017 to destroy the spacecraft.^[49] This method was chosen because it is imperative to ensure protection and prevent biological contamination to any of the moons of Saturn thought to offer potential habitability.^[81]

Glossary

See also

• Cassini–Huygens timeline
• Cassini–Huygens retirement
• Europlanet, data network
• Galileo, Jupiter orbiter and entry probe (1989–2003)
• Planetary Science Decadal Survey
• Tom Krimigis

References

Further reading

• David M. Harland (2002). Mission to Saturn: Cassini and the Huygens Probe. Springer-Verlag. ISBN 1-85233-656-0. 
• Ralph Lorenz and Jacqueline Mitton (2002). Lifting Titan's Veil: Exploring the Giant Moon of Saturn. Cambridge University Press. ISBN 0-521-79348-3. 
• Karl Grossman (1997). The Wrong Stuff: The Space Program's Nuclear Threat to Our Planet. Common Courage Press. ISBN 1-56751-125-2. 

External links

Wikimedia Commons has media related to Cassini-Huygens.

Official websites

• Cassini-Huygens at ESA
• Cassini-Huygens main page at NASA
• Cassini Mission Homepage by the Jet Propulsion Laboratory
• Cassini-Huygens Mission Profile by NASA's Solar System Exploration

Telecommunications & imaging

• Cassini Imaging Homepage
• DESCANSO DSN Telecom information
• CASSIE interactive web-browser-based mission explorer/simulator
• Cassini information by the National Space Science Data Center (NSSDC).
• Photo Gallery – full coverage
• Outside In – film animated from hundreds of thousands of still Cassini photographs
• Around Saturn – film featuring a virtual tour of Saturn made from a selection of more than 200,000 pictures snapped by Cassini from 2004 to 2012

Scientific press coverage

• Cassini's Tour de Saturn part A, B, C, D, E, F – descriptions of the 4-year tour of Saturn by Bruce Moomaw
• SpaceflightNow news coverage of the mission
• Countdown to Cancel the Cassini Space Probe by the Baltimore Peace Network in 1997 due to concerns over the use of plutonium

Other

• Spacecraft Cassini is Visiting Saturn!—children's stories explaining the Cassini mission
• Yahoo group for the Cassini Huygens mission

Spacecraft missions to Saturn Orbiters Cassini–Huygens (current) Past flybys Pioneer 11 Voyager 1 Voyager 2 Descent probes Huygens (Titan's atmosphere) Proposed missions AVIATR (Titan only) Enceladus Life Finder Enceladus Explorer Journey to Enceladus and Titan Kronos Life Investigation For Enceladus Saturn Atmospheric Entry Probe Saturn Ring Observer TALISE (Titan only) Titan Mare Explorer Titan Saturn System Mission Former plans Soviet mission plan Italics indicates active missions, even if they passed Saturn already.

Titan General Atmosphere of Titan Climate of Titan Life on Titan Lists Lakes of Titan List of geological features on Titan Lakes and seas Kraken Mare Ligeia Mare Punga Mare Abaya Lacus Bolsena Lacus Feia Lacus Hammar Lacus Jingpo Lacus Koitere Lacus Ladoga Lacus Mackay Lacus Müggel Lacus Neagh Lacus Ontario Lacus Sotonera Lacus Eyre Lacuna Ngami Lacuna Woytchugga Lacuna Features Adiri Arrakis Planitia Dilmun Doom Mons Erebor Mons Ganesa Macula Guabonito Irensaga Montes Mezzoramia Mindolluin Montes Misty Montes Mithrim Montes Perkunas Virgae Shangri-La Shikoku Facula Sotra Patera Taniquetil Montes Tsegihi Tui Regio Xanadu Exploration Current Cassini–Huygens Huygens (spacecraft) Proposed AVIATR (Titan only) Kronos TALISE (Titan only) Titan Mare Explorer Titan Saturn System Mission Past Soviet mission plan Pioneer program Pioneer 11 Voyager program Voyager 1 Voyager 2 See also Colonization of Titan Other topics Memorials on Titan Titan in fiction

21st century space probes Active space probes ACE Akatsuki ARTEMIS Cassini Chang'e 2 Chang'e 3 Yutu Chang'e 5-T1 Dawn Gaia Hayabusa 2 MASCOT IKAROS Juno LRO Mars Express 2001 Mars Odyssey Mars Orbiter Mission MAVEN MER Opportunity MRO MSL Curiosity New Horizons PROCYON Rosetta Philae SOHO STEREO Voyager 1 Voyager 2 Completed after 2000 by termination date NEAR Shoemaker (2001) Deep Space 1 (2001) Pioneer 10 (2003) Galileo (2003) Nozomi (2003) Genesis (2004) Huygens (2005) Mars Global Surveyor (2006) Phoenix (2008) Chang'e 1 (2009) Ulysses (2009) Chandrayaan-1 (2009) SELENE (2009) LCROSS (2009) Hayabusa (2010) Spirit (2010) Stardust (2011) GRAIL (2012) Deep Impact (2013) LADEE (2014) Venus Express (2014) MESSENGER (2015) List of space observatories List of lunar probes List of missions to the Moon proposed