Capitol Power Plant

Coordinates: 38°52′58.35″N 77°0′27.06″W / 38.8828750°N 77.0075167°W / 38.8828750; -77.0075167

The Capitol Power Plant in 2011, from the Architect of the Capitol
A Capitol Power Plant employee inspecting the equipment, from the Architect of the Capitol
The Capitol Power Plant at the turn of the 20th century.

The Capitol Power Plant is a fossil-fuel burning power plant which provides steam and chilled water for the United States Capitol, the Supreme Court, the Library of Congress and 19 other buildings in the Capitol Complex. Located at 25 E St SE in southeast Washington, D.C., it is the only coal-burning power plant in the District of Columbia, though it mostly uses natural gas.[1][2] The plant has been serving the Capitol since 1910, and is under the administration of the Architect of the Capitol (see 2 U.S.C. § 2162). Though it was originally built to supply the Capitol complex with electricity as well, the plant has not produced electricity for the Capitol since 1952.[1] Electricity generation is now handled by the same power grid and local electrical utility (Pepco) that serves the rest of metropolitan Washington.[3]

According to the U.S. Department of Energy, the facility released 118,851 tons of carbon dioxide in 2007.[4] In 2009 it switched to using natural gas, unless coal was needed for backup capacity. In 2013, it was announced that the Capitol Power Plant would add a Cogeneration Plant to the CPP that will use natural gas in a combustion turbine in order to efficiently generate both electricity and heat for steam, thus further reducing emissions.[2]

History

The power plant was constructed under the terms of an act of Congress passed on April 28, 1904, authorized in order to support two new office buildings that were then being planned. Now known as the Cannon House Office Building and the Russell Senate Office Building, these new offices required a substantial increase in energy to Capitol Hill. In addition, the U.S. Capitol and the Library of Congress would also receive power from the new plant, along with all future buildings to be constructed on the Capitol campus.[3]

Originally called the "Heating, Lighting, and Power Plant," the Capitol Power Plant was one of the earliest 25-cycle alternating current electric-generating facilities in the United States. The original steam boilers were replaced in 1923. In 1950, the steam boilers were modernized and replaced with coal-fired steam generators; at the same time, the plant's electricity generating capacity had reached its limit, and it was decided to abandon electricity production in favor of the local electrical utility. Expansion of the plant to support additional new construction was authorized in 1958, 1970, and in the early 21st century to support the opening of the Capitol Visitor Center.[3]

Controversy

Senators from coal mining states blocked a proposal in 2000 to use cleaner fuel for the plant. Senators Mitch McConnell (Republican of Kentucky) and Robert Byrd (Democrat of West Virginia), both from coal mining states, used their influence as two of the Senate's most senior members to block this proposal. In May 2007, CNN reported that two companies, International Resources Inc. and the Kanawha Eagle mine, have a contract to supply a combined 40,000 tons of coal to the plant over the next two years. The companies have given a combined $26,300 to the McConnell and Byrd campaigns for the 2006 election.[5]

In June 2007, Speaker of the House Nancy Pelosi announced the "Greening the Capitol" initiative.[6] The initiative's goal is to make the Capitol carbon neutral, and the power plant is a major obstacle to achieving this objective.[5] In November 2007, Daniel Beard, the House's Chief Administrative Officer, announced that he would purchase $89,000 worth of carbon offsets for 30,000 tons of carbon emissions. Beard made the purchase from the Chicago Climate Exchange.[7] On February 28, 2009, Pelosi and Senate Majority Leader Harry Reid sent a letter to the Architect of the Capitol asking him to create a plan to switch the power plant entirely to natural gas by the end of 2009.[8] This letter came just three days before a March 2009 scheduled protest (which happened despite the change).[9]

In response to the letter from Pelosi and Reid, the Architect of the Capitol replied on May 1, 2009 that the plant had been transition to natural gas and was prepared to switch completely to that fuel, using coal only as a backup source. In 2008, the plant had operated on about 65% natural gas and 35% coal, compared to 58% coal in 2005. This did not end the Capitol complex's reliance on coal. Electricity is supplied by a local utility company that uses coal as a power source.[10] By 2011, coal use at the CPP was down to 5%.

In 2013, the Architect of the Capitol announced that it had "identified the construction of a cogeneration plant as the most environmentally and economically beneficial way to meet its goal to use natural gas 100% of the time."[11] The new cogeneration unit would use 100 percent natural gas to provide power for the 23 buildings of the Capitol complex, which includes the Capitol Building, the House and Senate office buildings, the Supreme Court, the U.S. Botanic Garden and the Library of Congress buildings, among others. Not only will it reduce the use of coal on-site for the chillers and boilers, but it would provide 93% of the facilities electricity. This would allow it to replace inefficient, 45% coal-generated electricity bought of the grid with more efficiently generated, on-site electricity that uses no coal.[12] They completed the permitting process for this facility in June 2013.

Emissions

Table 1: Summary of Point Source Emissions: District of Columbia in 2002 (Tons)[13]

Facility PM2.5 NOx SO2 PM10
Capitol Power Plant 83 129 483 84
Pepco Benning Road Generating Station 15/16 15 253 1467 67
Pepco Buzzard Point Generating Station 5 340 390 5
GSA Central Heating Plant 12 66 8 12
10 Miscellaneous Sources 12 529 320 14
TOTAL 127 1,317 2,468 182
Share produced by Capitol Power Plant 65% 10% 20% 46%

Table 2: Summary of Pollution Reduction at the Capitol Power Plant Following Transition to Natural Gas (Tons)[12]

Pollutants 2007 2008 2009 2010 2011
SO2 460.95 240.73 175.33 36.98 48.04
NOx 189.02 128.79 121.20 105.15 90.36
PM 114.08 33.09 39.09 32.92 19.09
Hazardous Air Pollutants - 39.62 29.68 6.03 8.40
CO2e 118,851 - - 83,103 78,862

Particulates

For a plant its size (roughly 1/100th the size of the typical 500 MW power plant), the Capitol Power Plant used to produce a remarkably high quantity of the type of particulate matter (PM2.5) most closely associated with human health effects. As shown in Table 1, in 2002, the plant emitted a full 65 percent of the PM2.5 emitted in the District of Columbia by fixed sources(excluding automobiles, buses, trucks, trains and shipping). With the two other large power plants in the District of Columbia closed, and the CPP transition to cleaner energy, all of the emissions have been significantly reduced.

Particle pollution, also called particulate matter or PM, is one of six "criteria pollutants" (PM, lead, mercury, sulfur dioxide, nitrogen oxide, and ozone) regulated by the Environmental Protection Agency. PM is a complex mixture of extremely small particles and liquid droplets in the air. When breathed in, these particles can reach the deepest regions of the lungs. Exposure to particle pollution is linked to a variety of significant health problems, ranging from aggravated asthma to premature death in people with heart and lung disease. Particle pollution also is the main cause of visibility impairment in the nation’s cities and national parks.[14] Fine particles (PM2.5) are 2.5 micrometers in diameter and smaller; and inhaleable coarse particles (PM10) are smaller than 10 micrometers and larger than 2.5 micrometers.[14]

In 2006, EPA tightened the 24-hour fine particle standard from 65 micrograms per cubic meter to 35 micrograms per cubic meter, while leaving the annual fine particle unchanged. EPA retained the annual fine particle standard at 15 micrograms per cubic meter. EPA retained the pre-existing 24-hour PM10 standard of 150 micrograms per cubic meter. Due to a lack of evidence linking health problems to long-term exposure to coarse particle pollution, the Agency revoke the annual PM10 standard.[14]

Even before the EPA tightened the fine particular standard, Washington, D.C., was a "non-attainment" area.[15]

References

External links

This article is issued from Wikipedia - version of the Tuesday, June 16, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.