MagneRide
MagneRide is an automotive adaptive suspension with Magnetorheological damper system developed by the Delphi Automotive corporation[1][2] and now owned by Beijing West Industries that utilizes magnetically controlled dampers, or shock absorbers, for a highly adaptive ride. As opposed to traditional suspension systems, MagneRide has no mechanical valves or small moving parts that can wear out.[3] This system consists of four monotube dampers, one on each corner of the vehicle, a sensor set, and an ECU (electronic control unit) to maintain the system.
Background
The dampers are filled with magnetorheological fluid, a mixture of easily magnetized iron particles in a synthetic hydrocarbon oil. In each of the monotube dampers is a piston containing two electromagnetic coils and two small fluid passages through the piston. The electromagnets are able to create a variable magnetic field across the fluid passages. When the magnets are off, the fluid travels through the passages freely. However, when the magnets are turned on, the iron particles in the fluid create a fibrous structure through the passages in the same direction of the magnetic field. The strength of the bonds between the magnetized iron particles causes the viscosity of the fluid to increase resulting in a stiffer suspension. Altering the strength of the current results in an instantaneous change in force of the piston.[4] If the sensors sense any body roll, they communicate the information to the ECU. The ECU will compensate for this by changing the strength of the current to the appropriate dampers.
Differentiating features
- Low-velocity damping control
- Ability to "draw" force-velocity curve
- Fast response
History
The current application of MagneRide is the third generation. The first generation was created by Delphi Corporation and debuted on the Cadillac Seville STS. Previous generations of MagneRide used more primitive dampers. The piston inside these dampers contained a single, large electromagnetic coil. The ECU contained lead and had reached the limit of its potential.
Improvements
The previous generations were used as a basis for BWI's newest version of MagneRide. Changes from the previous generation include uprated seals and bearings to extend its application to heavier cars and SUV's.[5] The most notable improvements in the new system are the ECU and coils.
Improved ECU
The legislative requirement for lead-free ECU's caused BWI to redesign their control unit for the third generation. Because they could not use lead, BWI designed their new ECU from scratch. The new and improved ECU has three times the computing capacity as the previous edition as well as ten times more memory.[6] It also has greater tuneability.
Dual coils
As opposed to the previous generation's single coil, the third generation brought two smaller coils in each damper. With the single electromagnetic coil, there was a small delay from when the ECU turned off the current to when the damper lost its magnetic field. This was caused by a temporary electric current, or eddy current, in the electromagnet. This phenomenon resulted in a 20 ms delay in reaction time of the dampers. BWI eliminated this delay with its dual coil system. The two coils are wound in opposite directions to each other, cancelling out the eddy currents.[7] The dual coil system effectively eliminated the delay, causing a quicker responding suspension system.
Applications
MagneRide was first used by General Motors in the Cadillac Seville STS (2002) and is now used as a standard suspension or an option in many models for Cadillac, Buick, Chevrolet, and other GM vehicles. It can also be found on some non-US vehicles such as: Holden Special Vehicles, Ferrari, and Audi.
Specific Applications:
- Buick Lucerne: CXS trim
- Chevrolet Corvette C6: optional in coupe trim starting in 2005 model year and in hardtop (Z06) trim starting in 2012 model year; standard equipment in ZR1.
- Chevrolet Corvette C7: Optional with Z51 package, standard on Z06
- Chevrolet Camaro in ZL1 trim (2012—)
- Ford Mustang Shelby GT350 (2015–): Standard Option
- Chevrolet SS: standard as of 2015 MY
- Cadillac ATS (2013—): standard with 3.6L or 2.0T option package.
- Cadillac CTS (2009—) (Magnetic Ride Control)[8]
- Cadillac SRX (2004–09): standard with Performance or Premium option package.
- Cadillac DTS (2006–11): standard with Performance or Premium option package.
- Cadillac STS (2005–11): standard with Northstar V8 and 1SG option package.
- Cadillac Seville STS (2002–03): Debut application for MagneRide, replacing CVRSS.
- Ferrari 599
- Ferrari F12berlinetta
- Ferrari California
- HSV Senator
- HSV GTS
- HSV W427
- GMC Sierra (Denali Trim)
- GMC Yukon (Denali Trim for all 4 corners) (SLT Trim for just the rear)
- Audi TT (magnetic ride)
- Audi S3 (magnetic ride)
- Audi R8 (magnetic ride)[9]
- Acura MDX[10]
- Acura ZDX[10]
- Range Rover Evoque[11]
References
- ↑ http://www.motor-talk.de/forum/aktion/Attachment.html?attachmentId=488981
- ↑ http://www.delphi-iss.com/index.asp?pageID=20013
- ↑ Economist, Vol. 371 Issue 8379
- ↑ http://www.bwigroup.com/en/pshow.php?pid=22
- ↑ "Smooth Ride", Professional Engineering
- ↑ "Core Technology", Automotive Engineer
- ↑ "Third Generation of Bwi Magneride Ride Control Technology Debuts In New Range Rover Evoque", Electronic Specifier – Automotive
- ↑ http://www.cadillac.com/2014-cts-sport-sedan.html
- ↑ "Audi R8 Magnetic Ride"
- 1 2 "2013 Acura MDX undefined" (video)
- ↑ "Range Rover Evoque: driven", review on the website of the BBC's Top Gear
External links
- BWI Group
- "BWI wraps up Delphi deal", China Daily
|