Breda-SAFAT machine gun

Breda-SAFAT

A 12.7 mm (0.500 in) Breda-SAFAT machine gun on display at the Steven F. Udvar-Hazy Center
Type Machine-gun
Place of origin  Italy
Service history
In service Late 1930s and 1940s
Used by Regia Aeronautica
Wars World War II
Production history
Designed 1935
Manufacturer Breda-SAFAT (Società Italiana Ernesto Breda per Costruzioni Meccaniche / Breda Meccanica Bresciana / Società Italiana Ernesto Breda - Società Anonima Fabbrica Armi Torino)[1]
Variants Breda-SAFAT 20 mm (0.787 in) Cannon
Specifications
Weight 12.5 kg (28 lb) (7.7 mm)
29 kg (64 lb) (12.7 mm)[2]
Length 109 cm (43 in) (7.7 mm)
139 cm (55 in) (12.7 mm)[2]
Barrel length 64 cm (25 in) (7.7 mm)
80 cm (31 in) (12.7 mm)[2]

Cartridge 7.7x56mmR light, 12.7x81mmSR heavy
Caliber 7.7 mm (0.303 in)
12.7 mm (0.500 in)[2]
Barrels 1
Action Short recoil[2]
Rate of fire 800–900 rounds/min (7.7 mm)
700 rounds/min (575 rounds/min synchronized) (12.7 mm)[2]
Muzzle velocity 730 metres per second (2,400 ft/s) (7.7 mm)
765 metres per second (2,510 ft/s) (12.7 mm)[2]
Feed system Belt-fed[2]

Breda-SAFAT, (Società Italiana Ernesto Breda per Costruzioni Meccaniche / Breda Meccanica Bresciana - Società Anonima Fabbrica Armi Torino) was an Italian weapons manufacturer of the 1930s and 1940s that designed and produced a range of machine-guns and cannon primarily for use in aircraft. Based on the M1919 Browning machine gun, the Italian guns were chambered to fire indigenous ammunition with 7.7 mm (0.303 in) and 12.7 mm (0.500 in) calibres, predominantly ball, tracer for the 7.7mm, including high-explosive-incendiary-tracer (HEIT) (filled with 0.8 grams of PETN), or armour-piercing (AP) for the 12.7mm.

Design and development

During the 1930s both Breda and SAFAT (a division of FIAT) were tasked with producing designs for a new range of machine-guns for use in aircraft of the Regia Aeronautica, the offering from Breda being preferred. FIAT contested the decision but lost resulting in the sale of SAFAT to Breda to form Breda-SAFAT.

Despite the aim of producing an airborne machine-gun equal or superior to other similar weapons, the use of low propellant capacity rounds resulted in significantly lower muzzle velocities than other weapons of similar calibres. Other inadequacies included high weight and modest rates of fire as well as the ineffectiveness of the HEIT high explosive round.

However, despite these shortcomings, the Breda-SAFAT gun was generally praised by the Italian pilots and armourers, the pilots because of its long range and apparent good hitting power, the armourers because it was reliable.[3]

Thus, Italy lacked machine-guns with the critical qualities of light weight, a high rate of fire, good muzzle velocity, good projectile weight and reliability, while the Russians, Germans, Americans and Japanese had 12.7mm calibre automatic ordnance in the Berezin, MG 131, M2, and Ho-103 respectively. Late-war Italian aircraft began to adopt the "original" calibre German Mauser 15 mm (0.591 in) MG 151 cannon to give their aircraft parity in firepower with Allied fighters, with as many as three MG 151 fitted to Macchi MC.205, Fiat G.55 and Reggiane Re.2005—the third cannon firing through the propeller hub of the German-designed, Italian-built Fiat Tifone inline inverted V12 engines used to power these aircraft—in addition to cowl-mounted 7.7mm Bredas-SAFATs.

12.7mm Breda-SAFAT machine-guns in the waist gun positions of a FIAT R.S.14

The Breda guns, although adequate in 1935 at the time of their design, were out-classed by the standards of 1940, with Italian fighters such as the Fiat C.R.42, Fiat G.50, Macchi MC.200, Macchi MC.202 and Reggiane Re.2000 still only having two 12.7 mm Breda-SAFAT machine-guns and sometimes two extra 7.7 mm Breda-SAFAT machine-guns. Despite their shortcomings, thousands of Breda guns were built in the 1930s and 1940s, arming nearly every Italian fighter and bomber of that period. Many of these weapons were also adapted for the anti-aircraft role and remained in service until the 1970s as reserve weapons; even if all the aircraft that they equipped had been phased out by that time.

Notes

  1. "Breda-SAFAT_(mitragliatrice)". it.wikipedia. Retrieved 7 February 2013.
  2. 1 2 3 4 5 6 7 8 Williams, Anthony G.; Dr. Emmanuel Gustin. Flying Guns of World War II. Ramsbury: Airlife. p. 316. ISBN 978 1 84037 227 4.
  3. Gustavsson, Håkan; Slongo, Ludvico (2012). Gladiator vs Cr.42 Falco: 1940–41. p. 71. ISBN 9781849087087.

References

  • Ciampaglia, Giuseppe (2006). "Quando la Regia adottò il cannone da 20mm". RID magazine (11). 
  • Gustavsson, Håkan; Slongo, Ludvico (2012). Gladiator vs Cr.42 Falco : 1940-41. ISBN 9781849087087.
  • Williams, Anthony G.; Dr. Emmanuel Gustin. Flying Guns of World War II. Ramsbury: Airlife. p. 316. ISBN 978 1 84037 227 4. 
  • "Breda-SAFAT_(mitragliatrice)". it.wikipedia. Retrieved 7 February 2013. 

External links

This article is issued from Wikipedia - version of the Wednesday, August 19, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.