Borel hydro-monoplane

Borel hydro-monoplane
Role Seaplane
National origin France
Manufacturer Etablissements Borel
First flight 1912
Developed from Morane-Borel monoplane

The Borel Hydro-monoplane was a French seaplane produced in 1912.

Design and development

The Borel hydro-monoplane, which was developed from the 1911 Morane-Borel monoplane, was a tractor monoplane powered by a 80 hp Gnome Lambda rotary engine. The rectangular section fuselage tapered to a vertical knife-edge at the rear: at the front the longerons on each side were curved inwards, meeting at the front engine bearer. A curved aluminium cowling covered the top of the engine, and the sides of the fuselage were covered with aluminium as far aft as the rear of the cockpit. The two seats were arranged in tandem, with the pilot sitting in front. Dual controls were fitted. Tail surfaces consisted of a narrow-chord fixed horizontal surface with a much broader elevator with horn balances hinged to the trailing edge and a balanced rudder which extended below the sternpost and carried a small float. The main undercarriage consisted of a pair of unstepped flat-bottomed floats. Lateral control was by wing warping.[1]

Operational history

An example was entered in the 1913 Schneider Trophy competition, but crashed during the elimination trials.[2]

Another example, flown by George Chemet, was the winner of the 1913 Paris-Deauville race.[3]

Operators

 Italy
 United Kingdom

Specifications

Data from Flight, 26 July 1913, p. 814[4]

General characteristics

References

  1. "The Borel Hydro-Monoplane". Flight: 450. 19 July 1913.
  2. "The Monaco Meet". Flight: 813–6. 19 April 1913.
  3. Stéphane Nicolaou (1998). Flying Boats & Seaplanes: A History from 1905. MBI Publishing. p. 30. ISBN 9780760306215.
  4. Flight, 26 July 1913, p. 814
This article is issued from Wikipedia - version of the Wednesday, June 24, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.