Beachcat

A beachcat is an off-the-beach class of catamaran ("cat") sailboat.[1]

Background

Although the term "beachcat" was popularized by surf board designer Hobie Alter, who designed the paradigm-changing Hobie 14 in 1965 and Hobie 16 in 1967, the underlying concept is thousands of years old. The Polynesians are credited with the first "catamaran" designs, although it is probable that the initial design was more in the form of an outrigger of proa design, with one of the hulls serving as a balancing brace for a main canoe. The adventures of Thor Heyerdahl as chronicled in the book Kon Tiki, which proved that travel between Polynesia and South America was possible, is a testament to the inherent stability (even when made up of bundles of river reeds) of the catamaran design.

Early modern designs

Beachcats first came into style in the 1960s, with several popular designs. The Aqua cat is a good example of one of the early 1960s catamarans that is still in production.

Pacific

The "original" beachcat, the Pacific cat, appeared in 1960 in California. The Pacific cat was designed by Carter Pyle and was first built in 1960. It was slightly smaller than 19 ft × 8 ft, and was a solid fiberglass catamaran with a solid core deck and traditional catamaran sail plan. The design's chief limitation was its weight of over 500 lb with approximately 300 square feet (28 m2) of sail area. The design was a traditional design with dagger boards and a hard deck. By comparison, the AQUA CAT 12 weighed 160 pounds and could easily be carried by two people, and the mast raised by one person.

Photos of the Pacific cat demonstrate that it was adept at handling the daunting Pacific coast surf, probably due to the momentum it carried even with the limited [for the time] sail plan. Pacific cats were made by Newport Boats / Mobjack Manufacturing. (Reference)

Aqua

In the United States, Art Javes designed and marketed an early fiberglass catamaran sailboat, the Aqua, in 1961. The Aqua was a 12-foot-long fiberglass hulled cat, which featured two flat-bottomed, foam filled, symmetric fiberglass hulls. These hulls were connected with aluminum tubing that supported a trampoline-style deck that was large enough for several people. It also featured an unusual "lateen rigged" sail that was supported by a rigid aluminum A-frame. The mast itself was topped with a styrofoam float that helped insure that a capsizing, (especially in shallow water that could damage the mast), would be easily righted and result only in the boat going part way over. If capsized it was designed to rest on one hull, with the ball at the top of the mast preventing it from going fully inverted. The flat bottomed hulls made it a beach-friendly catamaran, but its reliance on dagger boards meant it had a draft of 2 ft with the dagger boards in position.

Art Javes partnered with Billy Mills to produce about 1,000 boats a year for a 10 year run. The Aqua was made by American Fiberglass Corp from 1962 to 1972. Originally based in Norwalk, CT, the company was in the sailboat division of General Recreation Corp in Charleston, SC as of 1970. Around 1976, an employee purchased the Aqua product line and it is still available from American Sail, Inc. in Charleston, SC. With more than 30,000 boats shipped,[2] the Aqua was inducted into the National Sailing Hall of Fame in 2001, and is still in production today.

The original Aqua cat 12 was modified to an improved Aqua cat 12.5 and is also available as an Aqua Cat 14 Catamaran which features upturned hulls and is available in an easier sailing resort model. The 14' model uses small keels to replace the dagger boards found on the smaller Aqua cats.

Hobie

In 1961, Hobie Alter was selling surfboards at an Anaheim boat show where he met Art Javes and the AQUA CAT 12. Shortly after this boat show, Hobie entered the catamaran business as well. The Hobie Cat was introduced in 1965 and borrowed some features from the AQUA CAT. The fledgling catamaran sailboat business benefited from both designs, which each found popularity at many beach resorts.

Hobie Alter acknowledged other influences on the design of his 1965 Hobie Cat.[3][4] was heavily influenced by the Molokai and Honolulu beach cats of the 25–40 ft range, used to take tourists on rides off the beach. These "beach cats" had been in use since at least the 1950s as a commercial venture, though GIs in World War II mention them in memoirs (inter alia, James Jones [cite]). The unique feature of these designs were asymmetrical hulls, a naval architecture term for hulls that are perpendicular (flat) on the outside of the hull, but curved on the inside. The design allows lateral resistance upwind, without the need for a skeg, daggerboard or centreboard. The Hobie Cat was the only design of the early three that did not use dagger boards, although now it offers designs with dagger boards and skegs. When running in and out of the surf, the lack of dagger boards or center boards makes "beaching" almost effortless.

The resulting and nearly ubiquitous Hobie is now the most recognized beach cat of the last thirty years. It combines the structure of the earlier Aqua with the asymmetrical hull design of the Molokai, HI, and the beaching ability of the Pacific cat. Combining these features, along with optional skeg and daggerboard options, Hobie created a catamaran that could easily sail on and off the beach through the surf. The brilliance of the initial Hobie design was the combination of the asymmetrical hull design with the smaller, surf "friendly" layout. Without dagger boards but with a large sail area to weight ratio (the "16" weighed 325 pounds (147 kg) at its inception and, with over 350 square feet (33 m2) of sail), the initial Hobie designs were able to sail into and out of heavy surf safely. The asymmetric hulls reduced lateral drift which made dagger board-dependent designs more difficult to handle in unfavorable winds or over extended shallow areas where dagger boards could not be deployed.

Within a few years of the Hobie design (particularly the "16"), other designers adopted the modifications in their improved beachcat designs.

Post-1972 designs

Prindle

The Prindle cat, introduced in 1972, sought to improve on the basic Hobie design by increasing the forward buoyancy with an almost vertical sheer (a trend that is currently the vogue in forward design, see, the 2011 Hobie "Wild Cat" F18 design and most of the current cruising designs from Fountaine Pajot, Dolphin, Privilege and Lagoon).

The Prindle cats, initially 16- and 18-ft designs, were comparable to the Hobies but were remarkable for their resistance to "pearling" (in surfer parlance) or "pitch poling" (in sailing vernacular). Even a well-sailed Hobie 16 was (and still is) quite capable of burying a hull and pitching end-over-end. The Prindles, with more forward buoyancy, resist this tendency, allowing more forward weight balance in heavier air (wind speed), although Prindles are still capable of pitch-poling given the right combination of forward weight, wind and sea conditions. Although out of production, the Prindle 16 is still in good supply on the used market, but the asymmetrical hulled 18s are rare.

Prindle moved into the classes production in the early 1990s, with the development of the Prindle 19, a well designed, fast and balanced ship. The Prindle 19 class continues to grow but is at best a borderline "beach cat", with more of an emphasis on hydrodynamically linear hull design and the use of dagger boards.

Diversification

The Prindle and Hobie were by no means the only beach cats in the early 1970s. Deviating from the raised platform and asymmetrical design typified by the Hobie 14 and 16, and the asymmetrical designs with the cross members set at deck level, as typified by the Prindle, new designs sprang up between 1972 and 1980, which sought to "ride the wave" (so to speak) to the Hobie success story. Some survived, but others produced only a few hundred (or even dozen) hulls and passed into naval architecture history. Those surviving and prospering included the speedsters from NACRA (North American Catamaran Racing Association) and the glass-fibre British Tornado design, which became an Olympic design for the 1984 Los Angeles Games but was (amongst much controversy), dropped from the 2012 London Games.

Designs that briefly prospered but were out of production by the early 1980s included the Sol Cat, the CatYak from Dayton Marine and the Alpha Cat, all with a fuller bow section design but none garnering enough success (financial or popular), to remain in production. The Shark Catamaran was also produced and popularized throughout the Great Lakes Region.

After the Hobie 14/16 and Prindle 16/18 "era", beach cat manufacturers increasingly moved away from the asymmetrical designs which moved easily on and off the beach, and focused on theoretically faster symmetrical designs, including the aforesaid Prindle 19, the Hobie 18, the Nacra 5.2 and the Boston Whaler "SuperCat 20". The influence of the Tornado as an Olympic class beginning in 1984 cannot be underestimated in the emphasis placed on symmetrical, dagger board based models. The Tornado, with its estimated thirty naut top speed, and Olympic panache, contributed to the continuance development of faster and faster "beach cats", which, theoretically, could sail in and out of the surf, but in reality, were much more adept at one design racing. Hence, the development of the F (for Formula) 18 class certification.

See also

References

  1. ↑ "Catamaran Sailboats at TheBeachcats.com". TheBeachcats.com. Retrieved 2014-02-05.
  2. ↑ American Sail www.AmericanSail.com
  3. ↑ Yachting Magazine, July 1970
  4. ↑ Time magazine, "The Cat that Flies", September 1968
This article is issued from Wikipedia - version of the Friday, September 18, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.