Bayfield-class attack transport

USS Cavalier, a typical Bayfield-class attack transport, underway off Hong Kong, 1959
Class overview
Name: Bayfield
Builders:
Operators: US Navy
Preceded by: Ormsby class
Succeeded by: Sumter class
In commission: 1943-1945 - 1946-1970
Completed: 34
Active: None
General characteristics
Type: Attack transport
Displacement: 8,100 tons, 16,100 fully loaded
Length: 492 ft 6 in (150.11 m)
Beam: 69 ft 6 in (21.18 m)
Draft: 26 ft 6 in (8.08 m)
Propulsion: Geared turbine drive,[1] 2 × D-type boilers,[2] single propeller, designed shaft horsepower 8,500
Speed: 18 knots (33 km/h; 21 mph)
Boats & landing
craft carried:
Capacity:
  • 4,500-4,800 tons
  • (175,000-200,000 cubic feet).
Complement:
  • Crew: 51 officers 524 enlisted
  • Flag: 43 officers, 108 enlisted
  • Troops: 80 officers, 1,146 enlisted
Armament:

The Bayfield-class attack transport was a class of US Navy attack transports that were built during World War II.

With the entry of the United States into the war, it was quickly realized that amphibious combat operations on hostile shores would be required, and that specialized ships would be needed for the purpose. The so-called "attack transport" ship type (hull classification symbol APA) was developed to meet this need. Attack transports were converted from standard transport vessels by being upgraded with extra firepower, and outfitted with a number of smaller integral landing craft (such as LCVPs and LCMs) with which amphibious assaults could be conducted.

The first attack transports began to enter service in 1942 and were built ad hoc from a host of different types. The first class to be built in substantial numbers was the Bayfield class, which began to enter service in 1943. The early vessels were converted from existing cargo or transport ships, later ones built as attack transports from the keel up.

Overview

Bayfield-class vessels were based on the large Type C3 passenger and cargo ship standard set by the US Maritime Commission. Originating in 1938, The C3 standard was designed to produce modern, good quality cargo and passenger ships to replace the ageing US merchant fleet, and which could also be readily converted into naval auxiliary vessels in the event of war. After the war broke out however, the need for shipping became so great that the US was forced to come up with designs that could be more quickly manufactured. Thus the C3-based Bayfield class and its predecessors were eventually outnumbered by the Haskell class which was based on the simpler Victory ship design.

Description

Bayfield-class vessels were based upon the C3-S-A2 design standard. The basic design had to undergo a number of changes in order to meet the attack transport specification.

Troop accommodation

In order to accommodate the troops, two cargo holds amidships had to be converted into accommodation facilities. This was achieved by dividing each hold into three decks, and then building a number of passageways along each deck. Along both walls of each passageway, bunk-beds tiered five high were installed, and since space was still at a premium, each bunk was only thirty inches wide.

The troops were provided with their own galley and mess hall separate from that of the ship's crew, but they had no dining hall and used their own mess gear to eat. A sick bay and dental clinic were also provided. The troop commander had his own private cabin and office, which was fitted with a loudspeaker system from which he could directly address the men under his command. In order to keep the soldiers entertained during their long, crowded voyages, music and other entertainment could be piped to the troop compartments.

Ballast

Because a troop transport carries less weight than a cargo ship, it was also found to be useful to place concrete in the bottom of the cargo holds in order to improve the ship's comfort, safety and performance.[3]

Weaponry

Since attack transports would be conducting operations off hostile shores, they had a greater requirement for armament than ordinary transports, particularly in regards to antiaircraft defence. The Bayfield class vessels were well outfitted in this regard. Each vessel was fitted with a pair of 5"/38 calibre dual purpose guns, one fore and one aft. The ships were also fitted with between two and four twin 40mm antiaircraft mounts (early examples came with two quad 1.1" gun mounts instead), plus two single 40 mm mounts and eighteen 20mm mounts as standard.

As the war progressed, the 20 mm cannon were found to be less effective than the 40 mm, and the later Gilliam and Haskell classes dispensed with some of these mounts. The later classes also had only one 5-inch (130 mm) gun instead of two.

Production

A total of 34 Bayfield-class vessels were produced between 1942 and 1944 - 20 by Ingalls Shipbuilding of Pascagoula, Mississippi and the remaining 14 at the San Francisco shipyard of Western Pipe & Steel - making the Bayfield class the second most numerous attack transport class behind the Haskell class.

Service

Bayfield-class vessels served in both the Atlantic and Pacific theatres of war. Some went on to see service in the Korean and Vietnam wars.

Of the 388 attack transports (APA and AKA) of all types built, the last to see service with the US Navy was the USS Chilton,[4] a Bayfield-class vessel built by Western Pipe & Steel which was launched on 29 December 1942, first commissioned on 7 December 1943 and decommissioned in August 1970. She was finally struck from the Navy register on 1 July 1972.

Footnotes

  1. Built by either General Electric or Westinghouse.
  2. Built by Combustion Engineering, Foster Wheeler or Babcock & Wilcox.
  3. Information for the "Ballast" and "Troop accommodation" sections comes from Maudsley, pp 75-76 (see references below).
  4. Mawdsley, page 141.

References

This article is issued from Wikipedia - version of the Sunday, February 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.