Barry Railway Class B1

Barry Railway Class B1

Former Barry Railway Class B1 0-6-2T at Swindon in 1950, British Railways no. 269
Type and origin
Power type Steam
Designer J. H. Hosgood
Builder Sharp, Stewart & Co. (27),
Vulcan Foundry (10),
Société Franco-Belge (5)
Build date 1890–1900
Total produced 42
Number rebuilt Some rebuilt from 1924 with GWR boiler
Specifications
Configuration 0-6-2T
UIC class C1 n2t
Gauge 4 ft 8 12 in (1,435 mm)
Driver diameter 4 ft 4 in (1.321 m);
Rebuilds: 4 ft 3 in (1.295 m)
Trailing dia 3 ft 6 in (1.067 m)
Loco weight 55 long tons 3 cwt (123,500 lb or 56 t);
Rebuilds: 53 long tons 9 cwt (119,700 lb or 54.3 t)
Fuel type Coal
Boiler pressure 160 psi (1.10 MPa);
Rebuilds: 150 psi (1.03 MPa)
Heating surface:
  Tubes
1.875 in (0.048 m)
Superheater:
  Heating area
1,070 sq ft (99.406 m2)
Cylinders Two Inside
Cylinder size 17.5 in × 26 in (444 mm × 660 mm)
Valve gear Stephenson
Performance figures
Tractive effort 20,825 lbf (92.63 kN);
Rebuilds: 19,906 lbf (88.55 kN)
Career
Operators BR » GWR » BR
Withdrawn 1932–1951
Disposition All scrapped

Barry Railway Class B1 were 0-6-2T steam tank locomotives of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by Sharp Stewart, & Co., Vulcan Foundry and Société Franco-Belge.[1] The locomotive, though similar to the B class, differed in having an increased tank capacity of 1,630 gallons compared with the 1,400 gallons of the B class. The purpose of this was to enable them to take a train of empty wagons from Cadoxton Yard to Trehafod Junction without the need to refill the tank.

Their main duty was to take loaded coal trains from Trehafod Junction, and the pits on the Brecon & Merthyr, to Cadoxton Yard and return either with the empty wagons or occasionally pit props from Barry Docks. However they could also be seen pulling colliers' trains between Barry and Porth as well as excursion trains from various locations to Barry Island. In particular 2 B1 class locomotives, nos. 111 and 122, were used to take excursion trains from the Rhymney Railway to Barry for those visiting the National Eisteddfod held there in 1920. B1s could also be seen pulling the 'Ports Express' from Barry to Newcastle over the Barry Railway section of the journey between Barry and Cardiff.

The locomotives passed to the Great Western Railway in 1922 and 20 survived into British Railways ownership in 1948. However, all 20 had been withdrawn by 1952 and none were preserved.

Build details

Year Quantity Builder Serial Numbers Barry Numbers GWR Numbers Notes
1890 9 Sharp, Stewart & Co. 3598–3606 38–46 233–235, 238, 240–244
1892 10 Vulcan Foundry 1336–1345 54–63 245–254
1894 6 Sharp, Stewart & Co. 4044–4049 73–78 255–260
1900 12 Sharp, Stewart & Co. 4607–4618 105–116 261–272
1900 5 Société Franco-Belge 1272–1276 122–126 273–277

References

Wikimedia Commons has media related to Barry Railway Class B1.
This article is issued from Wikipedia - version of the Friday, April 03, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.