Backcountry Super Cubs Mackey SQ2

Mackey SQ2
Role Amateur-built aircraft
National origin United States
Manufacturer Backcountry Super Cubs
Status In production (2012)
Number built 7
Unit cost
US$53,500 (kit only, 2011)
Developed from Piper PA-18 Super Cub

The Backcountry Super Cubs Mackey SQ2 is an American STOL amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.[1]

Design and development

The Mackey SQ2 features a strut-braced high-wing, a two-seats-in-tandem enclosed cockpit that is 30 in (76 cm) wide, fixed conventional landing gear and a single engine in tractor configuration.[1]

The aircraft fuselage is made from welded steel tubing, with the wings constructed of aluminum sheet, all covered in doped aircraft fabric. Its 36.9 ft (11.2 m) span wing has an area of 170 sq ft (16 m2), is supported by "V" struts with jury struts and mounts flaps as well as leading edge slats. The aircraft's recommended engine power range is 180 to 240 hp (134 to 179 kW) and standard engines used include the 180 hp (134 kW) Lycoming O-360 four-stroke powerplant. The aircraft can be fitted with tundra tires for operations on soft or rough surfaces. Construction time from the supplied kit is 1200 hours.[1]

Operational history

By December 2011 seven examples had been reported as completed and flown.[1]

Specifications (Mackey SQ2)

Data from Kitplanes[1]

General characteristics

Performance

References

  1. 1 2 3 4 5 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 44. Belvoir Publications. ISSN 0891-1851

External links

This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.