BR Standard Class 3 2-6-0
|
BR Standard Class 3 2-6-0 77000 at Darlington Works on 22 March 1959. This locomotive was then currently allocated to Hull (Springhead) MPD (shed code 53C). | |||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||
The BR Standard Class 3 2-6-0 was a class of mixed traffic steam locomotive designed by Robert Riddles for British Railways. It was essentially a hybrid design, the chassis being closely based on and sharing a number of parts with the LMS Ivatt Class 4, and having a boiler derived from a GWR No.2 boiler as fitted to the GWR Large Prairie 2-6-2T and 5600 Class 0-6-2T tank engines.
Design details
The design and construction took place at the ex-GWR Swindon Works, along with the 2-6-2T tank engine version of the class, though some details were designed at Brighton, Derby and Doncaster.[1] Although the boiler shared flanged plates with the GWR No.2 boiler the barrel was shortened by 5 13⁄16 inches and a dome added. Strangely the class did not share the same design of wheels as the Doncaster-designed BR Standard Class 4 2-6-0 (76XXX), which also had 5 ft 3 in (1,600 mm) driving wheels and the same piston stroke, and hence crank-pin throw.
In common with a number of the other BR Standard Classes, the chassis design used a number of LMS-designed components including Brake Hanger Brackets, Flexible Stretcher Brackets and Reversing Shaft Brackets.
The cylinder covers of engines as built were fitted with "screw-in" type pressure relief valves. From September 1955 revised cylinder covers were introduced for renewals incorporating "bolt-on" type pressure relief valves.[2]
Although the chassis had many almost identical parts to the LMS Ivatt Class 4 the motion brackets were derived from the design of those fitted to the LMS Ivatt Class 2 2-6-0 and LMS Ivatt Class 2 2-6-2T.
Unlike a number of the larger BR Standards the exhaust steam manifold within the smokebox saddle was a steel fabrication that was part of the welded saddle.[3] In a number of the large BR standards (BR Standard Class 6 and Class 7 engines) the exhaust steam manifold was a steel casting welded into the saddle during manufacture.[4]
Service
Only 20 were built, numbers 77000–77019, all at Swindon Works. Their operations were mainly restricted to the North Eastern and Scottish Regions, of British Railways, although 77014 ended its days on the Southern Region. Due to their small number, the class were the antithesis of 'standard' engines and it would probably have been better to build more 2-6-0s to the Standard Class 4 and Standard Class 2 designs instead. None has survived to preservation, though some components were saved from scrapyards for use on a project to build a new Standard Class 3 2-6-2T. This class was the last class of steam locomotive on British Railways to remain complete before suffering its first withdrawal. Number 77014 was transferred from Northwich depot on the London Midland Region to Guildford depot on the Southern Region in March 1966; it was withdrawn in July 1967.[5][6]
| Year | Number in service at start of year | Number withdrawn | Locomotive numbers |
|---|---|---|---|
| 1965 | 20 | 1 | 77010 |
| 1966 | 19 | 16 | 77000–01/03–09/11/13/15–19 |
| 1967 | 3 | 3 | 77002/12/14 |
New build of additional member of class
None of the class have survived into preservation. The 77021 Locomotive Group has been formed in order to address this gap in the ranks of the preserved BR Standards. The group feels that, being a relatively lightweight design, the 3MT would be an ideal heritage line machine.
The 77021 Locomotive Group believes that significant costs can be avoided as many of the required cast parts can be made from patterns held by fellow members of the British Railways Standard Locomotive Owners Group (BRSLOG) of which they are a member. Notably many cast parts are identical to those being used to build fellow new build locomotive 82045.
References
- ↑ Cooke, B.W.C., ed. (June 1954). "British Railways Standard Class "3" 2-6-0 Locomotives". The Railway Magazine. Vol. 100 no. 638 (Westminster: Tothill Press). pp. 418–419.
- ↑ Rear cylinder cover to BR drawing SL/SW/35 being superseded by SL/SW/666 and front cylinder cover to drawing SL/SW/85 being superseded by SL/SW/667 for renewals from September 1955.
- ↑ Confirmed on original BR drawing SL/SW/616 sourced from the NRM
- ↑ Confirmed on original BR drawing SL/DE/19620 sourced from the NRM
- ↑ Teal (1985), p. 74.
- ↑ Walford (2003), p. 226.
Bibliography
- ABC of British Railways Locomotives. Part 3 (Winter 1962 ed.). Ian Allan. p. 175.
- Bradley, Rodger P. (1984). The Standard Steam Locomotives of British Railways. David & Charles. ISBN 0715383841.
- Teal, Paul (1985). BR Motive Power Allocations 1959-1968 - 1: BR Standards & Austerities. Shepperton: Ian Allan. ISBN 0-7110-1540-6.
- Walford, John (2003). "Section 5.7.2 Allocation Summary". In Taylor, R.K. A Detailed History of British Railways Standard Steam Locomotives. Volume Two: The 4-6-0 and 2-6-0 Classes. Peterborough: RCTS. ISBN 0-901115-93-2.
External links
 |
Wikimedia Commons has media related to BR Standard Class 3 2-6-0. |
| ||||||||||||||