BMW M54

BMW M54 engine
Overview
Manufacturer BMW, Bayerische Motoren Werke AG
Production 2000–2006
Combustion chamber
Configuration Straight-6
Chronology
Predecessor BMW M52
Successor BMW N52, BMW N54

The BMW M54 is a straight-6 DOHC piston engine which replaced the M52 and was produced from 2000-2006. There was no "technical update" (TU) version of the M54 produced, therefore the engine specifications remained the same throughout its 7 year production. The M54 began to be phased out following the introduction of the BMW N52 in 2004.

The main differences between the M54 and its M52TU predecessor are the non-return fuel system, a fully electronic throttle[1] (without mechanical backup), an electronically controlled thermostat[2] and that the North American engines no longer use an iron block. The M54 uses an aluminium block and aluminium cylinder head with cast iron cylinder liners and, like the M52TU, the M54 features variable valve timing to both camshafts[3] (called dual VANOS by BMW) and a dual length intake manifold (called "DISA" by BMW).

The E46 M3 is powered by the S54 engine series, which is an evolution of the S50B32, itself being based on the M50. It still features an iron block as opposed to the aluminium M54.

Models

EngineDisplacementPowerTorqueRedlineBoreStrokeCompression ratioYear
M54B222,171 cc (132 cu in)125 kW (168 hp) @ 6100 rpm 210 N·m (155 lb·ft) @ 3500650080 mm (3.1 in)72 mm (2.8 in)10.8:12000
M54B252,494 cc (152 cu in)141 kW (189 hp) @ 6000 rpm 237 N·m (175 lb·ft) @ 3500650084 mm (3.3 in)75 mm (3.0 in)10.5:12000
M54B302,979 cc (182 cu in)170 kW (228 hp) @ 5900 rpm 300 N·m (221 lb·ft) @ 3500650084 mm (3.3 in)89.6 mm (3.5 in)10.2:12000
S54B323,246 cc (198 cu in)256 kW (343 hp) @ 7900 rpm 365 N·m (269 lb·ft) @ 4900800087 mm (3.4 in)91 mm (3.6 in)11.5:12000

M54B22

The 2,171 cc (132 cu in) M54B22 produces 125 kW (168 hp) at 6100 rpm and 210 N·m (150 lb·ft) of torque at 3500 rpm.[4]

Applications:

M54B25

The M54B25 is a 2,494 cc (152 cu in) engine with an 84 mm (3.3 in) bore and 75 mm (3.0 in) stroke. Output is 143 kW (192 hp) at 6000 rpm and 237 N·m (175 lb·ft) of torque at 3500 rpm.[4]

Applications:

M54B30

At 2,979 cc (182 cu in), the M54B30 is the largest M54 engine. The extra capacity is achieved using an increased stroke of 89.6 mm (3.5 in). Power is 170 kW (230 hp) at 5,900 rpm and torque is 300 newton metres (220 lb·ft) at 3,500 rpm.[4] There was also a slightly more powerful version of the M54B30 that could be ordered as part of the M Performance package in Canada or the Performance package in the USA. This engine used different camshafts and reprogrammed engine management to develop 175 kW (235 hp) at 5,900 rpm and 301 newton metres (222 lb·ft) at 3500 rpm and have a slightly higher redline of 6800 rpm (although the Canadian cars still show the limiter at 6500 rpm on the tachometer).[5][6]

The M54B30 was on the Ward's 10 Best Engines list through 2001-2003.[7]

Applications:

S54

Alt
BMW S54 engine

The S54 is the high performance equivalent to the M54, which was used in the E46 M3, Z3 M Coupé / Roadster, and the E85 Z4 M Roadster / E86 M Coupe. The S54 is technically an evolution of the iron-block S50B32. It shares few major components with the S50 and differences include:

S54B32

Applications:

S54B32HP

The upgraded S54 engine used in the E46 M3 CSL, officially designated S54 B32HP, has a high flow carbon fiber air intake, modified valve and camshaft timing, and a retuned DME using a MAP sensor instead of the MAF sensor found in a standard M3.[9] However, the engine is further modified in order to reduce weight – it features a lightweight exhaust manifold (made standard on late models of the normal M3) and thinner exhaust piping. Additionally, the intake and exhaust manifolds are slightly straightened to improve engine responsiveness.[10]

See also

References

Wikimedia Commons has media related to BMW M54.
This article is issued from Wikipedia - version of the Tuesday, December 22, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.