Anchor bend

"Fisherman's bend" redirects here. For a similarly-named knot, see Fisherman's knot. For the place, see Port Melbourne, Victoria.
Anchor bend
Names Anchor bend, Fisherman's Bend
Category Hitch
Releasing jamming
Typical use attaching a rope to a ring or similar termination
ABoK #1723 and #1841

The Anchor Bend is a knot used for attaching a rope to a ring or similar termination. Its name originates from the time when "bend" was understood to mean "tie to", and not restricted to knots that join rope ends. While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a Strangle knot to the standing part.

Anchor bend step by step, with a finishing half hitch.

See also

External links

This article is issued from Wikipedia - version of the Sunday, December 21, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.