Aerostat
An aerostat (From Greek ἀήρ aer (air) + στατός statos (standing) through French) is a lighter than air craft (the average density of the craft is lower than the density of atmospheric air) that gains its lift through the use of a buoyant gas. Aerostats include unpowered balloons and powered airships. A balloon may be free-flying or tethered. An aerostat's main component is one or more gasbags, a lightweight skin containing a lifting gas[1][2] to provide buoyancy, to which other components such as a gondola containing equipment or people are attached. Especially with airships, the gasbags are often protected by an outer envelope. One of the most recent deployments of an aerostat was seen at the opening ceremony of the nineteenth 2010 Commonwealth Games, held in Delhi, India. The aerostat used in the ceremony was the largest in the world.
Aerostats are so named because they use aerostatic lift which is a buoyant force that does not require movement through the surrounding air mass. This contrasts with the heavy aerodynes that primarily use aerodynamic lift which requires the movement of a wing surface through the surrounding air mass. The term has also been used in a narrower sense, to refer to the statically tethered balloon in contrast to the free-flying airship. This article uses the term in its broader sense.
Terminology
In conventional usage, the term aerostat refers to any aircraft that remains aloft primarily using aerostatic buoyancy.[3][4]
Historically all aerostats were called balloons. Powered types capable of horizontal flight were referred to as dirigible balloons or simply dirigibles (from the French dirigible meaning steerable). These powered aerostats later came to be called airships, with the term "balloon" reserved for unpowered types, whether tethered or free-floating.[5][4]
More recently, the US Government Accountability Office has used the term "aerostat" in a different sense, to distinguish the statically tethered balloon from the free-flying airship.[6]
Types
Balloons
A balloon is an aerostat which has no means of propulsion and must be either tethered on a long cable or allowed to drift freely with the wind.
Although a free balloon travels at the speed of the wind, it is travelling with the wind so to a passenger the air feels calm and windless. To change its altitude above ground it must either adjust the amount of lift or discard ballast weight. Notable uses of free-flying balloons include meteorological balloons and sport balloons.
A tethered balloon is held down by one or more mooring lines or tethers. It has sufficient lift to hold the line taut and its altitude is controlled by winching the line in or out. A tethered balloon does feel the wind. A round balloon is unstable and bobs about in strong winds, so the kite balloon was developed with an aerodynamic shape similar to a non-rigid airship. Both kite balloons and non-rigid airships are sometimes called "blimps".[4][7] Notable uses of tethered balloons include observation balloons and barrage balloons.
Airships
An airship is a powered, free-flying aerostat that can be steered. Airships divide into rigid, semi-rigid and non-rigid types, with these last often known as Blimps.
A rigid airship has an outer framework or skin surrounding the lifting gas bags inside it, The outer envelope keeps its shape even if the gasbags are deflated. The great Zeppelin airships of the twentieth century were rigid types.
A non-rigid airship or blimp deflates like a balloon as it loses gas. The Goodyear blimps are still a common sight in the USA.
A semi-rigid airship has a deflatable gas bag like a non-rigid but with a supporting structure to help it hold its shape while aloft. The first practical airship, the Santos-Dumont No.6 was a semi-rigid.
Some airships obtain additional lift aerodynamically as they travel through the air, using the shape of their envelope or through the addition of fins or even small wings. Types designed to exploit this lifting effect in normal cruise are called hybrid airships.
Hybrid aerostats
A hybrid type uses both static buoyancy and dynamic airflow to provide lift. The dynamic movement may be created either using propulsive power as a hybrid airship or by tethering in the wind like a kite, as a kytoon.
Piasecki Helicopter developed the Piasecki PA-97 Helistat using the rotor systems from four obsolete helicopters and a surplus Navy blimp, in order to provide a capability to lift heavier loads than a single helicopter could provide. The aircraft suffered a fatal accident during a test flight. In 2008, Boeing and SkyHook International resurrected the concept and announced a proposed design of the SkyHook JHL-40.
The Allsopp Helikite is a combination of a helium balloon and a kite to form a single, aerodynamically sound tethered aircraft, that exploits both wind and helium for its lift.
Lifting gases
In order to provide buoyancy, any lifting gas must be lighter, i.e. less dense, than the surrounding air. A hot air balloon is open at the bottom to allow hot air to enter, while the gas balloon is closed to stop the (cold) lifting gas from escaping. Common lifting gases have included hydrogen, coal gas and helium.
Hot air
When heated, air expands. This lowers its density and creates lift. Small hot air balloons or lanterns have been flown in China since ancient times. The first modern man-lifting aerostat, made by the Montgolfier brothers, was a hot air balloon. Most early balloons however were gas balloons. Interest in the sport of hot air ballooning reawoke in the second half of the twentieth century and even some hot-air airships have been flown.
Hydrogen
Hydrogen is the lightest of all gases and a manned hydrogen balloon was flown soon after the Montgolfier brothers. There is no need to burn fuel, so a gas balloon can stay aloft far longer than a hot-air balloon. It is also safer if there is no flame on board, since the materials used to make aerostats are flammable. Hydrogen soon became the most common lifting gas for both balloons and, later, airships. But hydrogen itself is flammable and, following several major disasters in the 1930s, it fell out of use.
Coal gas
Coal gas comprises a mix of methane and other gases, and typically has about half the lifting power of hydrogen. In the late nineteenth and early twentieth centuries municipal gas works became common and provided a cheap source of lifting gas.[8] Some works were able to produce a special mix for ballooning events, incorporating a higher proportion of hydrogen and less carbon monoxide, to improve its lifting power.
Helium
Helium is the only lifting gas which is both non-flammable and non-toxic, and it has almost as much (about 92%) lifting power as hydrogen. But it was not discovered in quantity until early in the twentieth century, and for many years only the USA had enough to use in airships. Nowadays, almost all gas balloons and airships use helium.
See also
References
Citations
- ↑ The Chambers Dictionary. Edinburgh: Chambers Harrap Publishers Ltd. 2000 [1998]. p. 541. ISBN 0-550-14000-X.
the gas-bag of a balloon or airship
- ↑ The Oxford Illustrated Dictionary. Great Britain: Oxford University Press. 1976 [1975]. p. 281.
fabric enclosing gas-bags of airship
- ↑ Green, W.; The observer's world aircraft directory, Warne (1961)
- 1 2 3 Wragg, D.; Historical dictionary of aviation, History Press (2008).
- ↑ Ege (1973), Page 11.
- ↑ "GAO-13-81, DEFENSE ACQUISITIONS: Future Aerostat and Airship Investment Decisions Drive Oversight and Coordination Needs" (PDF). Retrieved 2013-06-15.
- ↑ Ege (1973)
- ↑ Ege (1973) Pages 110 ff.
Bibliography
- Ege, Lennart; Balloons and Airships, Blandford, 1973.
External links
- Airship resources
- DJ's Zeppelin page
- "Illustrations of the Five Major Types of Lighter-Than-Air-Aircraft" Popular Mechanics, June 1930
- The principle of a balloon flight - VIDEO
| ||||||||||||||||||||||||||||||||||