Advanced Vector Extensions

Advanced Vector Extensions (AVX) are extensions to the x86 instruction set architecture for microprocessors from Intel and AMD proposed by Intel in March 2008 and first supported by Intel with the Sandy Bridge processor shipping in Q1 2011 and later on by AMD with the Bulldozer processor shipping in Q3 2011. AVX provides new features, new instructions and a new coding scheme.

AVX2 expands most integer commands to 256 bits and introduces FMA. AVX-512 expands AVX to 512-bit support utilizing a new EVEX prefix encoding proposed by Intel in July 2013 and first supported by Intel with the Knights Landing processor scheduled to ship in 2015.[1]

Advanced Vector Extensions

The width of the SIMD register file is increased from 128 bits to 256 bits, and renamed from XMM0–XMM7 to YMM0–YMM7 (in x86-64 mode, YMM0–YMM15). In processors with AVX support, the legacy SSE instructions (which previously operated on 128-bit XMM registers) can be extended using the VEX prefix to operate on the lower 128 bits of the YMM registers.

AVX-512 (ZMM0-ZMM31) register scheme as extension from the AVX (YMM0-YMM15) and SSE (XMM0-XMM15) registers
511 256 255 128 127 0
  ZMM0     YMM0     XMM0  
ZMM1 YMM1 XMM1
ZMM2 YMM2 XMM2
ZMM3 YMM3 XMM3
ZMM4 YMM4 XMM4
ZMM5 YMM5 XMM5
ZMM6 YMM6 XMM6
ZMM7 YMM7 XMM7
ZMM8 YMM8 XMM8
ZMM9 YMM9 XMM9
ZMM10 YMM10 XMM10
ZMM11 YMM11 XMM11
ZMM12 YMM12 XMM12
ZMM13 YMM13 XMM13
ZMM14 YMM14 XMM14
ZMM15 YMM15 XMM15
ZMM16 YMM16 XMM16
ZMM17 YMM17 XMM17
ZMM18 YMM18 XMM18
ZMM19 YMM19 XMM19
ZMM20 YMM20 XMM20
ZMM21 YMM21 XMM21
ZMM22 YMM22 XMM22
ZMM23 YMM23 XMM23
ZMM24 YMM24 XMM24
ZMM25 YMM25 XMM25
ZMM26 YMM26 XMM26
ZMM27 YMM27 XMM27
ZMM28 YMM28 XMM28
ZMM29 YMM29 XMM29
ZMM30 YMM30 XMM30
ZMM31 YMM31 XMM31

AVX introduces a three-operand SIMD instruction format, where the destination register is distinct from the two source operands. For example, an SSE instruction using the conventional two-operand form a = a + b can now use a non-destructive three-operand form c = a + b, preserving both source operands. AVX's three-operand format is limited to the instructions with SIMD operands (YMM), and does not include instructions with general purpose registers (e.g. EAX). Such support will first appear in AVX2.[2]

The alignment requirement of SIMD memory operands is relaxed.[3]

The new VEX coding scheme introduces a new set of code prefixes that extends the opcode space, allows instructions to have more than two operands, and allows SIMD vector registers to be longer than 128 bits. The VEX prefix can also be used on the legacy SSE instructions giving them a three-operand form, and making them interact more efficiently with AVX instructions without the need for VZEROUPPER and ZEROALL.

The AVX instructions support both 128-bit and 256-bit SIMD. The 128-bit versions can be useful to improve old code without needing to widen the vectorization, and avoid the penalty of going from SSE to AVX, they are also faster on some early AMD implementations of AVX. This mode is sometimes known as AVX-128.[4]

Applications

Prime95/MPrime, the software used for GIMPS, started using the AVX instructions since version 27.x.
dnetc, the software used by distributed.net, has an AVX2 core available for its RC5 project and will soon release one for its OGR-28 project.

New instructions

These AVX instructions are in addition to the ones that are 256-bit extensions of the legacy 128-bit SSE instructions; most are usable on both 128-bit and 256-bit operands.

Instruction Description
VBROADCASTSS, VBROADCASTSD, VBROADCASTF128 Copy a 32-bit, 64-bit or 128-bit memory operand to all elements of a XMM or YMM vector register.
VINSERTF128 Replaces either the lower half or the upper half of a 256-bit YMM register with the value of a 128-bit source operand. The other half of the destination is unchanged.
VEXTRACTF128 Extracts either the lower half or the upper half of a 256-bit YMM register and copies the value to a 128-bit destination operand.
VMASKMOVPS, VMASKMOVPD Conditionally reads any number of elements from a SIMD vector memory operand into a destination register, leaving the remaining vector elements unread and setting the corresponding elements in the destination register to zero. Alternatively, conditionally writes any number of elements from a SIMD vector register operand to a vector memory operand, leaving the remaining elements of the memory operand unchanged. On the AMD Jaguar processor architecture, this instruction with a memory source operand takes more than 300 clock cycles when the mask is zero, in which case the instruction should do nothing. This appears to be a design flaw.[6]
VPERMILPS, VPERMILPD Permute In-Lane. Shuffle the 32-bit or 64-bit vector elements of one input operand. These are in-line 256-bit instructions, meaning that they operate on all 256 bits with two separate 128-bit shuffles, so they can not shuffle across the 128-bit lanes.[7]
VPERM2F128 Shuffle the four 128-bit vector elements of two 256-bit source operands into a 256-bit destination operand, with an immediate constant as selector.
VZEROALL Set all YMM registers to zero and tag them as unused. Used when switching between 128-bit use and 256-bit use.
VZEROUPPER Set the upper half of all YMM registers to zero. Used when switching between 128-bit use and 256-bit use.

CPUs with AVX

Issues regarding compatibility between future Intel and AMD processors are discussed under XOP instruction set.

Compiler and assembler support

Recent releases of GCC starting with version 4.6 (although there was a 4.3 branch with certain support) and the Intel Compiler Suite starting with version 11.1 support AVX. The Visual Studio 2010/2012 compiler supports AVX via intrinsic and /arch:AVX switch. The Open64 compiler version 4.5.1 supports AVX with -mavx flag. Absoft supports with -mavx flag. PathScale supports via the -mavx flag. The Free Pascal compiler supports AVX and AVX2 with the -CfAVX and -CfAVX2 switches from version 2.7.1. The Vector Pascal compiler supports AVX via the -cpuAVX32 flag. The GNU Assembler (GAS) inline assembly functions support these instructions (accessible via GCC), as do Intel primitives and the Intel inline assembler (closely compatible to GAS, although more general in its handling of local references within inline code). Other assemblers such as MASM VS2010 version, YASM,[12] FASM, NASM and JWASM.

Operating system support

AVX adds new register-state through the 256-bit wide YMM register file, so explicit operating system support is required to properly save and restore AVX's expanded registers between context switches. The following operating system versions support AVX:

Advanced Vector Extensions 2

Advanced Vector Extensions 2 (AVX2), also known as Haswell New Instructions,[2] is an expansion of the AVX instruction set introduced in Intel's Haswell microarchitecture. AVX2 makes the following additions:

New instructions

Instruction Description
VBROADCASTSS, VBROADCASTSD Copy a 32-bit or 64-bit register operand to all elements of a XMM or YMM vector register. These are register versions of the same instructions in AVX1. There is no 128-bit version however, but the same effect can be simply achieved using VINSERTF128.
VPBROADCASTB, VPBROADCASTW, VPBROADCASTD, VPBROADCASTQ Copy an 8, 16, 32 or 64-bit integer register or memory operand to all elements of a XMM or YMM vector register.
VBROADCASTI128 Copy a 128-bit memory operand to all elements of a YMM vector register.
VINSERTI128 Replaces either the lower half or the upper half of a 256-bit YMM register with the value of a 128-bit source operand. The other half of the destination is unchanged.
VEXTRACTI128 Extracts either the lower half or the upper half of a 256-bit YMM register and copies the value to a 128-bit destination operand.
VGATHERDPD, VGATHERQPD, VGATHERDPS, VGATHERQPS Gathers single or double precision floating point values using either 32 or 64-bit indices and scale.
VPGATHERDD, VPGATHERDQ, VPGATHERQD, VPGATHERQQ Gathers 32 or 64-bit integer values using either 32 or 64-bit indices and scale.
VPMASKMOVD, VPMASKMOVQ Conditionally reads any number of elements from a SIMD vector memory operand into a destination register, leaving the remaining vector elements unread and setting the corresponding elements in the destination register to zero. Alternatively, conditionally writes any number of elements from a SIMD vector register operand to a vector memory operand, leaving the remaining elements of the memory operand unchanged.
VPERMPS, VPERMD Shuffle the eight 32-bit vector elements of one 256-bit source operand into a 256-bit destination operand, with a register or memory operand as selector.
VPERMPD, VPERMQ Shuffle the four 64-bit vector elements of one 256-bit source operand into a 256-bit destination operand, with a register or memory operand as selector.
VPERM2I128 Shuffle the four 128-bit vector elements of two 256-bit source operands into a 256-bit destination operand, with an immediate constant as selector.
VPBLENDD Doubleword immediate version of the PBLEND instructions from SSE4.
VPSLLVD, VPSLLVQ Shift left logical. Allows variable shifts where each element is shifted according to the packed input.
VPSRLVD, VPSRLVQ Shift right logical. Allows variable shifts where each element is shifted according to the packed input.
VPSRAVD Shift right arithmetically. Allows variable shifts where each element is shifted according to the packed input.

CPUs with AVX2

AVX-512

Main article: AVX-512

AVX-512 are 512-bit extensions to the 256-bit Advanced Vector Extensions SIMD instructions for x86 instruction set architecture proposed by Intel in July 2013, and scheduled to be supported in 2015 with Intel's Knights Landing processor.[1]

AVX-512 consists of multiple extensions not all meant to be supported by all processors implementing them. Only the core extension AVX-512F (AVX-512 Foundation) is required by all implementations.

The instruction set consists of the following:

CPUs with AVX-512

See also

References

  1. 1 2 3 4 5 James Reinders (23 July 2013), AVX-512 Instructions, Intel, retrieved 20 August 2013
  2. 1 2 Haswell New Instruction Descriptions Now Available, Software.intel.com, retrieved 2012-01-17
  3. ↑ "14.9". Intel 64 and IA-32 Architectures Software Developer's Manual Volume 1: Basic Architecture (PDF) (-051US ed.). Intel Corporation. p. 349. Retrieved 23 August 2014. Memory arguments for most instructions with VEX prefix operate normally without causing #GP(0) on any byte-granularity alignment (unlike Legacy SSE instructions).
  4. ↑ "i386 and x86-64 Options - Using the GNU Compiler Collection (GCC)". Retrieved 2014-02-09.
  5. ↑ "Linux RAID". LWN. 2013-02-17.
  6. ↑ "The microarchitecture of Intel, AMD and VIA CPUs - An optimization guide for assembly programmers and compiler makers" (PDF). Retrieved May 2014.
  7. ↑ "Chess programming AVX2". Retrieved March 2014.
  8. ↑ "Intel Offers Peek at Nehalem and Larrabee". ExtremeTech. 2008-03-17.
  9. ↑ "Intel Core i7-3960X Processor Extreme Edition". Retrieved 2012-01-17.
  10. ↑ Dave Christie (2009-05-07), Striking a balance, AMD Developer blogs, retrieved 2012-01-17
  11. ↑ New "Bulldozer" and "Piledriver" Instructions (PDF), AMD, October 2012
  12. ↑ YASM 0.7.0 Release Notes http://yasm.tortall.net/releases/Release0.7.0.html
  13. ↑ Twitter, retrieved 2010-06-23
  14. ↑ x86: add linux kernel support for YMM state, retrieved 2009-07-13
  15. ↑ Linux 2.6.30 - Linux Kernel Newbies, retrieved 2009-07-13
  16. ↑ Floating-Point Support for 64-Bit Drivers, retrieved 2009-12-06
  17. ↑ Add support for the extended FPU states on amd64, both for native 64bit and 32bit ABIs, svnweb.freebsd.org, 2012-01-21, retrieved 2012-01-22
  18. ↑ "FreeBSD 9.1-RELEASE Announcement". Retrieved 2013-05-20.
  19. ↑ Add support for saving/restoring FPU state using the XSAVE/XRSTOR., retrieved 2015-03-25
  20. 1 2 3 James Reinders (17 July 2014). "Additional AVX-512 instructions". Intel. Retrieved 3 August 2014.

External links

This article is issued from Wikipedia - version of the Monday, January 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.